News for hackers. Stuff that matters.
Re:Detroit’s LED streetlights going dark after a few years by amelius on Tuesday May 07, 2019 @06:10PM (#19853927)
What are the requirements on the power supply?
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @07:53PM (#19854590)
In all honesty, good capacitors.

Good caps are expensive, and cheap alternatives are plentiful. Nine out of ten off the shelf LED drivers have cheap ass chinese caps in them.

You also need good overall thermal design, which means good heatsinks, which means chunks of metal, which of course are expensive.

It's entirely possible to make a driver that will outlive any LED it powers, it's just that nobody wants to pay for it.

Re:Detroit’s LED streetlights going dark after a few years by irq on Tuesday May 07, 2019 @08:06PM (#19854653)
I want to pay for it so bad though. I am sick of LED bulbs randomly dying and randomly making noises. Why isn't there a longevity-focused LED bulb brand?
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @08:15PM (#19854704)
Longevity is antithetical to every accepted way of doing business nowadays because it doesn't generate a continuous revenue stream. Good luck getting capital to start a business based on products with longevity.
Re:Detroit’s LED streetlights going dark after a few years by chrisdhoover on Tuesday May 07, 2019 @08:44PM (#19854860)
Every? There are are buy-it-for-life producers. Examples, Alden shoes, Snap-on wrenches, Fluke meters. With most Toyotas and Hondas you’ll tire of them before they wear out if keep them minimally maintained. Basic kitchen equipment will not fail over several lifetimes. A moderately priced stainless pan will last. Decent knives will eventually wear away from repeated sharpening but I bet if you bought one today it would be in your estate as long as you don't use it for pry bar or a screw driver
Re:Detroit’s LED streetlights going dark after a few years by dsfyu404ed on Tuesday May 07, 2019 @10:04PM (#19855295)
All the brands you just listed are not examples of "buy it for life" engineering.

I dunno about the shoes but Snap On isn't really great quality anymore. The Chinese have closed the gap. Fluke, Honda and to a greater extent Toyota are all steadily moving toward more disposable products.

The cheap Chinese kitchen stuff you mentioned is actually the most durable item because in order to stand up to occasional abuse without being damaged it needs to be so overbuild that it can last lifetimes. That's simply a function of the design requirements, not any particular manufacturer's attitude though.

Re:Detroit’s LED streetlights going dark after a few years by benj111 on Wednesday May 08, 2019 @05:02AM (#19857087)
"Snap On isn't really great quality anymore. The Chinese have closed the gap" That doesn't mean Snap On isn't 'buy it for life' though. That means the Chinese are too.

You raise a good point though. Its very hard to evaluate a product that's supposed to last a life time, until you've had it a lifetime. So the benefits to a manufacturer are slow to accrue, but they're also slow to dispel, so there's massive temptation to cut corners and rely on that reputation, while lowering costs.

It'll be interesting to see how the EV market works out. You have a product that could last for life (with battery replacements). I suspect they'll be viewed, by the manufacturer at least, as disposable when the battery goes.

Re:Detroit’s LED streetlights going dark after a few years by acct1771 on Thursday May 09, 2019 @02:16PM (#19870699)
Snap On IS the Chinese.
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @09:11PM (#19855009)
Fair point and good examples. But those are all old companies. How many new companies (companies formed in the last 10 years) make long-lived hardware products?
Re:Detroit’s LED streetlights going dark after a few years by xfitm3 on Tuesday May 07, 2019 @08:20PM (#19854732)
I really like Philips LED lights, but finding the right combination of a well designed power supply, thermal management, and high CRI is the elusive trifecta. It’s not surprising to give up one.
Re:Detroit’s LED streetlights going dark after a few years by stephen_g on Tuesday May 07, 2019 @09:16PM (#19855035)
If you're looking for installed units, I've been really happy with my Brightgreen LED downlights. Of course, I could have literally bought a box of 10 low-quality Chinese import downlights from the local lighting store for the price of two of these, but the high CRI and really high quality driver made it worth it for me.

Not sure what availability is like in the US and other countries though.

Re:Detroit’s LED streetlights going dark after a few years by Gibbon1 on Wednesday May 08, 2019 @05:21AM (#19857181)
My comment is for LED lighting the power supply and the LED's should be separate units.
Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @06:31PM (#19854041)
It has to be a good source of direct current, literally. It has to produce a steady, constant amperage regardless of grid spikes and fluctuations. Given that the grid is AC, this requires a relatively complex circuit and more careful engineering than is commonly done for the power supplies inside bulbs.

Edit: Sometimes LED current is actually high-current AC with a square waveform, especially with dimmable bulbs. This is fine provided it's well-regulated and protected from spikes.

Re:Detroit’s LED streetlights going dark after a few years by jcims on Tuesday May 07, 2019 @07:28PM (#19854418)
This is complicated by the fact that the temperature of the LED materially influences its electronic properties.

As a result you generally need to wire them in series rather than in parallel so that the current can’t differentially select the LED of least resistance and cause thermal runaway. Series wiring in turn cranks up the voltage requirements necessary to drive lots of power, requiring more costly components.

Oh, forgot to mention, different color LEDs have different forward current requirements, so have fun building a good and cheap driver for 100W RGBW.

Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @07:46PM (#19854552)
Sort of, but not really.

LEDs can easily be wired in parallel as long as you use resistors to balance them. If you dial in the voltage real tight you can get away with minimal losses in the resistors. If you are really fancy you can use transistors and shunts to actively balance then for even more efficiency.

The reason why series is more popular is actually because it is cheaper and(can be) more efficient. It's not uncommon for cheap led lights to just throw 40 leds in series with a dead simple "driver" (read: rectifier, smoothing caps, and a resistor)to run it right off 120V.

Re:Detroit’s LED streetlights going dark after a few years by rahimnathwani on Wednesday May 08, 2019 @12:29AM (#19855876)
Re: your last sentence, does that mean the whole unit dies as soon as one LED fails?
Re:Detroit’s LED streetlights going dark after a few years by jcims on Wednesday May 08, 2019 @01:54AM (#19856207)
Not the person you’re replying to, but yes. Series config you lose the circuit if the LED fails open and it shuts the whole string down naturally.

Similar issues can affect parallel. If one LED fails open and you don’t adjust the current, you’ll start overdriving the other LEDs and shorten their lives...potentially dramatically. You could add current sense and shut down the board or even adjust current, but then costs go up.

Typical LED strips are small serial strings of typically three lights connected in parallel. That way if something goes wrong you knly lose a few lights.

Re:Detroit’s LED streetlights going dark after a few years by acchow on Tuesday May 07, 2019 @07:09PM (#19854296)
Can we design an LED that isn't affected by typical city fluctuations and spikes?
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @10:05PM (#19855300)
I'm not sure where the OP is coming from because any halfway decent LED driver will accept a wide range of voltages, far more than the fluctuations seen on public lines.
Re:Detroit’s LED streetlights going dark after a few years by Itsdijital on Tuesday May 07, 2019 @10:23PM (#19855390)
LEDs themselves are very intolerant of voltage (well really current fluctuations, semi-conductors are weird), but that isn't an issue because the driver deals with that and large swings will kill the driver or kill the driver and LED.

LED tolerance doesn't really play into the scenario here. It's all about the driver.

Re:Detroit’s LED streetlights going dark after a few years by dreamcompiler on Tuesday May 07, 2019 @10:20PM (#19855373)
I think he's asking if LEDs themselves can be more tolerant, since the drivers built in to LED bulbs rarely even rise to the level of "halfway decent."
Re:Detroit’s LED streetlights going dark after a few years by pixl97 on Tuesday May 07, 2019 @07:39PM (#19854497)
If you can, I'm sure someone would pay you a lot of money for the design.