News for hackers. Stuff that matters.
Re:A 3D printed toothbrush for all your teeth by toki5 on Tuesday October 01, 2013 @01:43PM (#6477747)
This is the wrong problem to try and solve. Toothbrushes are a solved problem.

If you want to disrupt at-home dentistry, solve flossing instead. That one's still a pain in the ass that comes back to bite (heh) a huge amount of people down their roads.

Re:A 3D printed toothbrush for all your teeth by josefresco on Tuesday October 01, 2013 @01:49PM (#6477791)
Floss picks. They mostly solved my flossing reluctance. That and my dentist threatening a more invasive cleaning process if my gum health didn't improve.

They seem like a waste (mine are recyclable) but I found for myself and kids they are 100 times easier than traditional floss.

/I do not own stock or a website selling floss picks

Re:A 3D printed toothbrush for all your teeth by DanHulton on Tuesday October 01, 2013 @01:54PM (#6477837)
Agreed a million percent. I hated flossing and I still do, but these are so easy to use, that it's absolutely overcome my reluctance.

Most nights are like "But I don't wanna floss, enh, it's like a couple seconds, whatever."

Re:A 3D printed toothbrush for all your teeth by subpixel on Tuesday October 01, 2013 @02:13PM (#6477994)
Pro-tip: if you use a floss pick, rinse it in water and dip it in mouthwash every time you move between teeth.

Using the same small piece of floss for all your teeth actually spreads bacteria, etc. throughout your mouth, causing all the things you're trying to avoid by flossing in the first place.

Dentists & hygienists never floss two sets of teeth with the same piece of floss. (And yes, they go through a crap-ton of floss.)

Re:A 3D printed toothbrush for all your teeth by coryl on Tuesday October 01, 2013 @02:59PM (#6478331)
Hmm, is this actually an issue worth worrying about? Your mouth is already awash like one big swamp. It doesn't strike me that you could "contaminate" an area any worse than your tongue could.

The purpose of flossing is to dislodge food particles and plaque buildup in difficult to reach places. These are the energy sources for plaque/cavity causing bacteria. No energy source = no bad bacteria = no problem.

Re:A 3D printed toothbrush for all your teeth by subpixel on Tuesday October 01, 2013 @04:03PM (#6478721)
My evidence is anecdotal: I used floss picks for months, went to the dentist, and he accused me of not flossing.

My sister is a hygienist, and she told me that's her experience with patients as well, and that you need clean floss to avoid spreading bacteria into the places you're trying to clean.

Optimal form may also be hard to achieve with floss picks - you want to form a 'c' shape with the floss partially wrapping around your tooth. That's impossible to do with a short, taught piece of floss.

Re:A 3D printed toothbrush for all your teeth by npsimons on Tuesday October 01, 2013 @02:56PM (#6478311)
Using the same small piece of floss for all your teeth actually spreads bacteria, etc. throughout your mouth, causing all the things you're trying to avoid by flossing in the first place.

Citation needed; I've heard this one before, and I just don't buy it. I've always believed (perhaps wrongly) that flossing was meant to remove food debris the bacteria lives off of that a toothbrush can't get to.

Dentists & hygienists never floss two sets of teeth with the same piece of floss. (And yes, they go through a crap-ton of floss.)

Maybe my hygienist is doing it wrong, but she uses very little floss and uses the same piece for multiple tooth gaps.

Re:A 3D printed toothbrush for all your teeth by reustle on Tuesday October 01, 2013 @02:14PM (#6478005)
Yep. I never flossed but I now have these things everywhere. A bag in my driver side car door, in my desk, in my backpack, etc.
Re:A 3D printed toothbrush for all your teeth by rip747 on Tuesday October 01, 2013 @02:50PM (#6478267)
a dentist friend of mine gave me a floss card once (looks like a credit card only has floss in it). still have it and i don't know what i'm going to do when it runs out, it has literally been a life saver for me. if there is one thing i hate in life is having something caught between your teeth all day.

Edit: thank you google! http://www.flosscard.com/order-retail-10-packs/

Re:A 3D printed toothbrush for all your teeth by nocman on Tuesday October 01, 2013 @04:25PM (#6478857)
Wow. How did you use your floss card to prevent yourself from being killed?

I'd love to hear that story.

(I'm taking the word "literally" ... um ... literally here)

:-D

Re:A 3D printed toothbrush for all your teeth by krupan on Tuesday October 01, 2013 @07:16PM (#6479697)
Re:A 3D printed toothbrush for all your teeth by nocman on Monday October 14, 2013 @12:50PM (#6548290)
Just came back to this.

Thank you! I needed a good laugh (and I will be increasing the view count on that video!).

Re:A 3D printed toothbrush for all your teeth by vidarh on Tuesday October 01, 2013 @02:20PM (#6478051)
Interdental brushes works well for me. Pretty much like a toothpick but a brush, and deforms more. Small enough to pretty much always have one with me - my gums get easily inflamed so it's a relief to be able to use them anytime.
Re:A 3D printed toothbrush for all your teeth by wikiburner on Tuesday October 01, 2013 @02:21PM (#6478055)
The Reach Access ones are even easier. No stretching your mouth open to get to the molars. Highly recommended.
Re:A 3D printed toothbrush for all your teeth by pdonis on Tuesday October 01, 2013 @02:34PM (#6478146)
Toothbrushes are a solved problem.

Sure, if you don't mind spending several minutes doing it. I, for one, would love a toothbrush that got it all done in six seconds.

solve flossing instead

According to the article, this "toothbrush" also substitutes for flossing, since it can put bristles between the teeth.

Re:A 3D printed toothbrush for all your teeth by swalsh on Tuesday October 01, 2013 @02:55PM (#6478302)
Water in a bottle is pretty much a solved problem. Just take a plastic bottle, and put water in it.

If you want to disrupt the beverage industry, try adding new flavors instead.

-------------------------

The phrase "Solved problem" is one of the most frustrating things I hear engineers mutter.

Re:A 3D printed toothbrush for all your teeth by marcosdumay on Tuesday October 01, 2013 @05:58PM (#6479335)
You know, most of the times the problem is really solved, and the inventor just loses the time and money he could invest on some unsolved problem.

Yeah, some times an extraordinary invention just changes the scope of the problem, or solves it so much better that "good enough" stops being enough. But if you have one of those solutions, you probably know it, and should also know that the problem is solved - how can you revolutionize a mature market without knowing it's mature? (That'll probably be the case here if that brush really works.)

Re:A 3D printed toothbrush for all your teeth by trafficlight on Tuesday October 01, 2013 @01:50PM (#6477797)
I don't know, 6 seconds of brushing sounds pretty good.
Re:A 3D printed toothbrush for all your teeth by jlgreco on Tuesday October 01, 2013 @01:52PM (#6477813)
Agreed. At that point it becomes something I could actually see myself doing after every meal.
Re:A 3D printed toothbrush for all your teeth by phogster on Tuesday October 01, 2013 @02:02PM (#6477912)
Isn't there a thing as overbrushing?
Re:A 3D printed toothbrush for all your teeth by jlgreco on Tuesday October 01, 2013 @02:10PM (#6477975)
Probably; all I know is that my dentist always tells me I should brush after all meals. However that is probably assuming the standard "3 meals a day" instead of the modern American "continuous meal throughout the day, with occasional breaks for breathing".
Re:A 3D printed toothbrush for all your teeth by DanBC on Tuesday October 01, 2013 @02:48PM (#6478249)
Modern advice is to brush before eating. You clean the teeth so stuff doesn't stick to them. Brushing after eating brushes when your teeth are being attacked by acid.

(http://www.nhs.uk/Livewell/dentalhealth/Pages/Teethcleaningg...)

> When should I brush my teeth?

> Brush your teeth for at least two minutes in the morning before breakfast and last thing at night before you go to bed.

> Never brush your teeth straight after a meal as it can damage your teeth, especially if you've had fruit, fizzy drinks, wine or any other food that contains acid.

> This is because tooth enamel is softened by the acid and can be worn away by brushing. Instead, wait an hour after a meal before brushing your teeth to give your saliva chance to neutralise the acid.

Obviously, I'm not a dentist and nothing I say is meant to replace anything an actual dentist tells you.

Re:A 3D printed toothbrush for all your teeth by jlgreco on Tuesday October 01, 2013 @03:31PM (#6478537)
Huh, that makes sense at least; I'll have to look into that.
Re:A 3D printed toothbrush for all your teeth by knappe on Tuesday October 01, 2013 @02:42PM (#6478205)
Yep. Over-brushing can cause your gums to inflame and retreat, lowering the gum line. There is also no fix to this problem short of surgery. Wish I had known that when I was younger.
Re:A 3D printed toothbrush for all your teeth by EvanAnderson on Tuesday October 01, 2013 @02:21PM (#6478054)
The only damage that I've ever read about re: over-brushing has been enamel damage caused by abrasives in toothpaste. The bristles of the brush should be much softer than enamel.
Re:A 3D printed toothbrush for all your teeth by npsimons on Tuesday October 01, 2013 @03:00PM (#6478337)
My dentist had to fill in spots near my gums on my upper molars that were worn down; I seem to remember him telling me not to brush so hard.
Re:A 3D printed toothbrush for all your teeth by marcosdumay on Tuesday October 01, 2013 @05:48PM (#6479302)
I had this problem for ages, in the end, the actual problem was gastrits. Any gastric problem has that same simptom, so if it persists, go check for them.
Re:A 3D printed toothbrush for all your teeth by tripzilch on Wednesday October 02, 2013 @05:22AM (#6481455)
I don't doubt you, but that might also have been advice for after the filling perhaps? The stuff they fill it with is not nearly as hard as the stuff on the outside of your teeth (which is pretty damn hard). So a filling will always be a weak spot.
Re:A 3D printed toothbrush for all your teeth by dice on Tuesday October 01, 2013 @01:58PM (#6477868)
FTA:

>According to the company, By simply biting and grinding, Blizzident automatically cleans all teeth perfectly within six seconds, and you can even floss and clean your tongue at the same time.

Re:A 3D printed toothbrush for all your teeth by eof on Tuesday October 01, 2013 @08:13PM (#6479897)
EH.. I spend ~5 minutes a day brushing my teeth.. if I brush during the day instead of just at night/morning.. it migh tbe 7-8.

If I could legitmately get that down to say, ~30 seconds.. I might save 4.5 minutes x 365 days = ~27 hours a year. If I make $10/hr and have plenty of time; this doesn't make sense. If I make $100/hr and am limited on time; this is potentially pretty sweet, especially if I am able to get a better cleaning.

Re:A 3D printed toothbrush for all your teeth by jotux on Tuesday October 01, 2013 @02:05PM (#6477937)
I've had basically the same idea as the the article, but for flossing, since I was a kid. You would mold your teeth and then cut slots in the mold between the teeth. You would then string floss through all of the slots and put the whole thing in your mouth. A single bit down would floss all of your teeth at once. A neat idea, but not that practical.
Re:A 3D printed toothbrush for all your teeth by klipt on Wednesday October 02, 2013 @05:05AM (#6481413)
But moving floss vertically in and out is bad flossing technique. You're supposed to curve the floss around the tooth:

http://www.oralb.com/topics/proper-flossing.aspx

> Contour floss around the side of the tooth.

Re:A 3D printed toothbrush for all your teeth by jotux on Wednesday October 02, 2013 @11:54AM (#6483183)
This is why it's not practical.
Re:A 3D printed toothbrush for all your teeth by gcb0 on Wednesday October 02, 2013 @01:51AM (#6480887)
Take my money!
Re:A 3D printed toothbrush for all your teeth by pedalpete on Tuesday October 01, 2013 @07:26PM (#6479752)
Toothbrushes are not a 'solved problem' because a toothbrush is not a problem.

Clean teeth is the problem (or cleaning teeth or not clean teeth or !clean_teeth). Toothbrush is a solution to the problem, this is another solution.

Just like you say 'solve flossing instead'. Flossing is not a problem, stuff stuck between your teeth causing decay is the problem.

Re:A 3D printed toothbrush for all your teeth by Peaker on Tuesday October 01, 2013 @08:13PM (#6479894)
Transportation was also a solved problem, before the car.
Re:A 3D printed toothbrush for all your teeth by brk on Tuesday October 01, 2013 @08:18PM (#6479909)
Not really. Cars allowed for distance, cargo capacity and speed to increase dramatically.

This potentially saves you a couple of minutes per day. Maybe significant from a proportional perspective, but not in an absolute sense.

Re:A 3D printed toothbrush for all your teeth by xur17 on Tuesday October 01, 2013 @11:57PM (#6480518)
Yep, and I'd even argue that transportation is still not a solved problem (cars are expensive, we waste a lot of time driving them, etc).
Re:A 3D printed toothbrush for all your teeth by marshray on Tuesday October 01, 2013 @11:05PM (#6480366)
Exactly. People spent far more than 3 minutes a day on transportation before the automobile. They still do.
Re:A 3D printed toothbrush for all your teeth by crystaln on Tuesday October 01, 2013 @02:18PM (#6478038)
Tie a piece of floss in a circle. That solves most of the problem.
Re:A 3D printed toothbrush for all your teeth by loceng on Tuesday October 01, 2013 @02:19PM (#6478043)
Tooth health was solved thousands of years ago - and it's called Oil Pulling. Toothbrushes are the norm because of marketing budgets of teaching society to buy 1 disposable product (toothbrush), which then requires buying another product on a recurring basis (toothpaste).

There are different kinds of oils you can use for different benefits, though overall you just need the suction and vacuum that the oil allows for (with the density of the oil). It's great for your gums and teeth overall - and has other benefits relating to tongue health, tasting of food, etc..

Re:A 3D printed toothbrush for all your teeth by alanctgardner2 on Tuesday October 01, 2013 @02:25PM (#6478087)
I was really curious, so I looked up Oil Pulling [1]. 15-20 minutes of swishing oil around in my mouth? I don't see how that's ideal for anyone, it sounds disgusting and terribly time consuming. The literature linked from Wikipedia also doesn't talk about any of the benefits you discuss, and I'm a little skeptical. Why can't I achieve this by just swishing my own spit around all day?

1. http://en.wikipedia.org/wiki/Oil_pulling

Re:A 3D printed toothbrush for all your teeth by talmand on Tuesday October 01, 2013 @02:38PM (#6478178)
Not only all that, but the Wikipedia article states that after spitting out the oil you would then clean your teeth, gums, and tongue as you normally would.

It only seems to be a remedy for specific situations.

Re:A 3D printed toothbrush for all your teeth by loceng on Wednesday October 02, 2013 @12:16AM (#6480584)
Try it. I don't have any links that reference the technique I learned, though you want to only have so much oil in your mouth that you can maintain swishing it around (through your teeth, back and forth, etc) for the 15-20 minutes. I wouldn't start with 15-20 minutes either - you won't be able to maintain it, your muscles in your mouth will get tired.

You need to rinse after with a roughly half-water, half-hydrogen peroxide mix - after spitting the oil into your toilet (into sink could cause clogging issues) - and swish it around in your mouth for 10-15 seconds, through your teeth, etc.. This will help whiten your teeth too - most toothpaste companies add a bit of hydrogen peroxide to the toothpaste for this effect.

Spit isn't as dense as oil, and so it won't create as much pressure when being squeezed through your gums - which will loosen out anything stuck in your gums, that floss could otherwise get, and instead of floss jamming in say a piece of meat in further, the swishing and suction that occurs from a 'tight' vacuum in your mouth helps pull the stuck material away.

You don't have to swish for 15-20 minutes either, even a few minutes will do similar - though 15-20 minutes has added benefits, mainly related to the blood flow with your tongue, and the muscles in your mouth / throat, etc.. More so if you use sunflower oil because sunflowers absorb radiation (another thing you'll probably want to look up because you'll say "BULLSHIT!" -- Wikipedia doesn't have anything on it, though a search on Google brings up various results). P.S. If you oil pull with sunflower oil (can't remember if you want refined or unrefined) then after ~3 days you'll start to get a brown spot at the back middle of your tongue - you can gently scrap that off with a spoon. After a week or so that'll likely stop showing.

Anyway, try it yourself - is all I can really suggest..

Re:A 3D printed toothbrush for all your teeth by vectorjohn on Tuesday October 01, 2013 @02:52PM (#6478277)
Random Hacker News commenter finds home dental remedy that outsmarts the entire field of dentistry. Toothbrush companies hate this!

But seriously. This is not real.

Re:A 3D printed toothbrush for all your teeth by brennenHN on Tuesday October 01, 2013 @03:20PM (#6478465)
One weird trick for whiter teeth!!!
Re:A 3D printed toothbrush for all your teeth by aric on Wednesday October 02, 2013 @04:29AM (#6481309)
You're being downvoted and yet your comment is worthy and even a "hack" so to speak. That's sad and typical. On behalf of people who care and are fascinated, thank you.

Oil pulling works and remineralizes tooth enamel. I do it occasionally. However, using a toothbrush to remove most food particles beforehand saves a lot of time. Do both. Then cleanse with a quick water rinse after. There are some biodegradable and recyclable toothbrushes on the market.

Re:A 3D printed toothbrush for all your teeth by driverdan on Wednesday October 02, 2013 @09:14AM (#6482158)
He's being downvoted because it sounds like pseudoscience and he didn't provide any sources to back up the claims.
Re:A 3D printed toothbrush for all your teeth by aric on Wednesday October 02, 2013 @11:43AM (#6483110)
I'm skeptical about everything. However, I try not to downvote that which sounds pseudo-scientific even when it contradicts deep preconceptions. I try to remain open, intrigued, and investigative. Fewer things in life have several major, unbiased studies that can act as evidence. It's helpful to reject any broad claim of a "fact" while accepting it as a matter of thought.

Hmm...

Upon further consideration, in defense of downvoters, the person's claim was pretty extreme to reject the benefits of brushing. That makes it a disservice to his/her other point. Ah well. Most people haven't tried oil to remineralize. Most people won't. I'm in the minority of those who have, with empirical benefit.

Re:A 3D printed toothbrush for all your teeth by loceng on Wednesday October 02, 2013 @12:05AM (#6480551)
Just to add - for all those downvoting me - if you oil pull AND maintain a diet low in sugars, you won't have to really brush your teeth afterward. I am assuming most others you need to brush afterward in order to avoid potential liabilities. Great to see such strong bigotry here on HN..
Re:A 3D printed toothbrush for all your teeth by standeven on Tuesday October 01, 2013 @02:46PM (#6478235)
Keep your pseudo-science to yourself, please.