News for hackers. Stuff that matters.
Re:Claude Opus 4.7 costs 20–30% more per session by _pdp_ on Friday April 17, 2026 @12:34PM (#47807766)
IMHO there is a point where incremental model quality will hit diminishing returns.

It is like comparing an 8K display to a 16K display because at normal viewing distance, the difference is imperceptible, but 16K comes at significant premium.

The same applies to intelligence. Sure, some users might register a meaningful bump, but if 99% can't tell the difference in their day-to-day work, does it matter?

A 20-30% cost increase needs to deliver a proportional leap in perceivable value.

Re:Claude Opus 4.7 costs 20–30% more per session by highfrequency on Friday April 17, 2026 @02:59PM (#47809342)
I believe that's why 90% of the focus in these firms is on coding. There is a natural difficulty ramp-up that doesn't end anytime soon: you could imagine LLMs creating a line of code, a function, a file, a library, a codebase. The problem gets harder and harder and is still economically relevant very high into the difficulty ladder. Unlike basic natural language queries which saturate difficulty early.

This is also why I don't see the models getting commoditized anytime soon - the dimensionality of LLM output that is economically relevant keeps growing linearly for coding (therefore the possibility space of LLM outputs grows exponentially) which keeps the frontier nontrivial and thus not commoditized.

In contrast, there is not much demand for 100 page articles written by LLMs in response to basic conversational questions, therefore the models are basically commoditized at answering conversational questions because they have already saturated the difficulty/usefulness curve.

Re:Claude Opus 4.7 costs 20–30% more per session by Aperocky on Friday April 17, 2026 @05:11PM (#47810602)
> the dimensionality of LLM output that is economically relevant keeps growing linearly for coding

Doubt. Yes. there was at one point it suddenly became useful to write code in a general sense. I have seen almost no improvement in department of architecting, operations and gaslighting. In fact gaslighting has gotten worse. Entire output based on wrong assumption that it hid, almost intentionally. And I had to create very dedicated, non-agentic tools to combat this.

And all of this with latest Opus line.

Re:Claude Opus 4.7 costs 20–30% more per session by skydhash on Friday April 17, 2026 @06:09PM (#47811134)
Also doubt. But most likely because of organizational inertia. After a while, you’re mostly focused on small problems and big features are rare. You solution is quasi done. But now each new change is harder because you don’t want to broke assumptions that have become hard requirements.
Re:Claude Opus 4.7 costs 20–30% more per session by zarzavat on Saturday April 18, 2026 @05:57AM (#47814604)
Agreed. The proprietary nature of these tools is a huge impediment to their usefulness.

A intelligence plateau will happen sooner or later (my bet is on sooner), and when it does the open models will catch up. And everybody will be using open models and open source agents because they're so much more flexible.

Re:Claude Opus 4.7 costs 20–30% more per session by atlex2 on Saturday April 18, 2026 @12:24PM (#47817115)
I’ve started to pick up on some of the “unwilling to dig deeply into the humans perspective” & “provide ideation and then run with it” in 4.7. I actually think it’s consistent with confabulation, now that they’ve removed most of the models ability to observe its own reasoning in 4.7.

The effect is over-complicated engineering that takes way more time to review as to its right-size for the job.

Feels like hiding things, however.

Re:Claude Opus 4.7 costs 20–30% more per session by ZeroCool2u on Friday April 17, 2026 @01:05PM (#47808110)
Whenever we get the locally runnable 4k models things are going to get really awkward for the big 3 labs. Well at least Google will still have their ad revenue I guess.
Re:Claude Opus 4.7 costs 20–30% more per session by UncleOxidant on Friday April 17, 2026 @01:22PM (#47808313)
Given how little claude usage they've been giving us on the "pro" plan lately, I've started doing more with the various open Qwen3.* models. Both Qwen3-coder-next and Qwen3.5-27b have been giving me good results and their 3.6 models are starting to be released. I think Anthropic may be shooting themselves in the foot here as more people start moving to local models due to costs and/or availability. Are the Qwen models as good as Claude right now? No. But they're getting close to as good as Claude sonnet was 9 months to a year ago (prior to 4.5, around 4.0). If I need some complex planning I save that for claude and have the Qwen models do the implementation.
Re:Claude Opus 4.7 costs 20–30% more per session by Aurornis on Friday April 17, 2026 @02:24PM (#47808999)
I've also been using the Qwen3.5-27B and the new Qwen3.6 locally, both at Q6. I don't agree that they're as good as pre-Opus Claude. I really like how much they can do on my local hardware, but we have a long way to go before we reach parity with even the pre-Opus Claude in my opinion.
Re:Claude Opus 4.7 costs 20–30% more per session by _fizz_buzz_ on Friday April 17, 2026 @04:40PM (#47810335)
What hardware do you use? I want to experiment with running models locally.
Re:Claude Opus 4.7 costs 20–30% more per session by threecheese on Friday April 17, 2026 @05:09PM (#47810593)
OP’s Qwen3.6 27B Q6 seems to run north of 20GB on huggingface, and should function on an Apple Silicon with 32GB RAM. Smaller models work unreasonably well even on my M1/64GB MacBook.

I am getting 10tok/sec on a 27B of Qwen3.5 (thinking, Q4, 18GB) on an M4/32GB Mac Mini. It’s slow.

For a 9B (much smaller, non-thinking) I am getting 30tok/sec, which is fast enough for regular use if you need something from the training data (like how to use grep or Hemingways favorite cocktail).

I’m using LMStudio, which is very easy and free (beer).

Re:Claude Opus 4.7 costs 20–30% more per session by UncleOxidant on Friday April 17, 2026 @04:59PM (#47810502)
Not who you asked, but I've got a Framework desktop (strix halo) with 128GB RAM. In linux up to about 112GB can be allocated towards the GPU. I can run Qwen3.5-122B (4-bit quant) quite easily on this box. I find qwen3-coder-next (80b param, MOE) runs quite well at about 36tok/sec. Qwen3.5-27b is a bit slower at about ~24tok/sec but that's a dense model.
Re:Claude Opus 4.7 costs 20–30% more per session by wizee on Friday April 17, 2026 @05:46PM (#47810955)
I run Qwen 3.5 122B-A10B on my MacBook Pro, and in my experience its capability level for programming and code comprehension tasks is roughly that of Claude Sonnet 3.7. Honestly I find that pretty amazing, having something with capability roughly equivalent to frontier models of an year ago running locally on my laptop for free. I’m eager to try Qwen 3.6 122B-A10B when it’s released.
Re:Claude Opus 4.7 costs 20–30% more per session by blurbleblurble on Friday April 17, 2026 @01:55PM (#47808662)
I was thinking the exact same thing just now as I load up qwen3.6 into hermes agent and all while fantasizing that it will replace opus 4.7. It might not actually but seems like we're on the verge of that.

Lately I've been wondering too just how large these proprietary "ultra powerful frontier models" really are. It wouldn't shock me if the default models aren't actually just some kind of crazy MoE thing with only a very small number of active params but a huge pool of experts to draw from for world knowledge.

Re:Claude Opus 4.7 costs 20–30% more per session by manmal on Friday April 17, 2026 @02:51PM (#47809263)
Why don’t you do the planning yourself? It’s very likely to be a better plan.
Re:Claude Opus 4.7 costs 20–30% more per session by robot_jesus on Friday April 17, 2026 @01:15PM (#47808241)
They're not perfect but the local model game is progressing so quickly that they're impossible to ignore. I've only played around with the new qwen 3.6 models for a few minutes (it's damn impressive) but this weekend's project is to really put it through its paces.

If I can get the performance I'm seeing out of free models on a 6-year-old Macbook Pro M1, it's a sign of things to come.

Frontier models will have their place for 1) extensive integrations and tooling and 2) massive context windows. But I could see a very real local-first near future where a good portion of compute and inference is run locally and only goes to a frontier model as needed.

Re:Claude Opus 4.7 costs 20–30% more per session by UncleOxidant on Friday April 17, 2026 @01:23PM (#47808330)
I've had really good results form qwen3-coder-next. I'm hoping we get a qwen3.6-coder soon since claude seems to get less-and-less available on the pro plan.
Re:Claude Opus 4.7 costs 20–30% more per session by efficax on Friday April 17, 2026 @01:43PM (#47808526)
If the apple silicon keeps making the gains it makes, a mac studio with 128gb of ram + local models will be a practical all-local workflow by say 2028 or 2030. OpenAI and Anthropic are going to have to offer something really incredible if they want to keep subscription revenue from software developers in the near future, imo
Re:Claude Opus 4.7 costs 20–30% more per session by snek_case on Friday April 17, 2026 @12:39PM (#47807819)
It probably depends what you're using the models for. If you use them for web search, summarizing web pages, I can imagine there's a plateau and we're probably already hitting it.

For coding though, there is kind of no limit to the complexity of software. The more invariants and potential interactions the model can be aware of, the better presumably. It can handle larger codebases. Probably past the point where humans could work on said codebases unassisted (which brings other potential problems).

Re:Claude Opus 4.7 costs 20–30% more per session by Bolwin on Friday April 17, 2026 @04:55PM (#47810468)
> summarizing web pages

For summarizing creative writing, I've found Opus and Gemini 3 pro are still only okay and actively bad once it gets over 15K tokens or so.

A lot of long context and attention improvements have been focused on Needle in a Haystack type scenarios, which is the opposite of what summarization needs.

Re:Claude Opus 4.7 costs 20–30% more per session by levocardia on Friday April 17, 2026 @01:54PM (#47808649)
Depends a lot on the task demands. "Got 95% of the way to designing a successful drug" and "Got 100% of the way" is a huge difference in terms of value, and that small bump in intelligence would justify a few orders of magnitude more in cost.
Re:Claude Opus 4.7 costs 20–30% more per session by 9dev on Friday April 17, 2026 @02:05PM (#47808779)
But that objective measure is exactly what we’re lacking in programming: There is often many ways to skin a cat, but the model only takes one. Without knowing about those it didn’t take, how do you judge the quality of a new model?
Re:Claude Opus 4.7 costs 20–30% more per session by altern8 on Friday April 17, 2026 @03:18PM (#47809532)
I would say following instructions.

If Claude understood what you mean better without you having to over explain it would be an improvement

Re:Claude Opus 4.7 costs 20–30% more per session by snoman on Saturday April 18, 2026 @08:59PM (#47820921)
I agree with you, but my gut tells me that a lot of people don’t know what a good outcome should/could look like and are accepting whatever it delivers.
Re:Claude Opus 4.7 costs 20–30% more per session by simplyluke on Friday April 17, 2026 @01:28PM (#47808385)
I'm seeing a lot of sentiment, and agree with a lot of it, that opus 4.6 un-nerfed is there already and for many if not most software use cases there's more value to be had in tooling, speed, and cost than raw model intelligence.
Re:Claude Opus 4.7 costs 20–30% more per session by mlinsey on Friday April 17, 2026 @01:21PM (#47808298)
I agree, but also the model intelligence is quite spikey. There are areas of intelligence that I don't care at all about, except as proxies for general improvement (this includes knowledge based benchmarks like Humanity's Last Exam, as well as proving math theorems etc). There are other areas of intelligence where I would gladly pay more, even 10X more, if it meant meaningful improvements: tool use, instruction following, judgement/"common sense", learning from experience, taste, etc. Some of these are seeing some progress, others seem inherent to the current LLM+chain of thought reasoning paradigm.
Re:Claude Opus 4.7 costs 20–30% more per session by manmal on Friday April 17, 2026 @03:20PM (#47809559)
Common sense isn’t a language pattern. I doubt this will ever work w/ LLMs.
Re:Claude Opus 4.7 costs 20–30% more per session by mlinsey on Saturday April 18, 2026 @12:29AM (#47813143)
The models that we are paying to generate tokens are already not really just LLMs, as anyone studying language models ten years ago (or someone who describes them as "next token predictors") would understand them. Doing a bunch of reinforcement learning so that a model performs better at ssh'ing into my server and debugging my app is already realllly stretching the definition of "language pattern".

I think when we do get AI that can perform as well as a human at functionally all tasks, they will be multi-paradigm systems; some components will not resemble anything in any commercial system today, but one component will be recognizably LLM-like, and act as an essential communication layer.

Re:Claude Opus 4.7 costs 20–30% more per session by aray07 on Friday April 17, 2026 @12:49PM (#47807921)
yeah thats is my biggest issue - im okay with paying 20-30% more but what is the ROI? i dont see an equivalent improvement in performance. Anthropic hasnt published any data around what these improvements are - just some vague “better instruction following"
Re:Claude Opus 4.7 costs 20–30% more per session by margorczynski on Friday April 17, 2026 @01:58PM (#47808682)
The other thing is most people don't really care about price per token or whatever but how much it will cost to execute (successfully) a task they want.

It doesn't matter if a model is e.g. 30% cheaper to use than another (token-wise) but I need to burn 2x more tokens to get the same acceptable result.

Re:Claude Opus 4.7 costs 20–30% more per session by Bridged7756 on Friday April 17, 2026 @02:32PM (#47809065)
Its enshittificating real fast. They'll just keep releasing model after model, more expensive than the last, marginal gains, but touted as "the next thing". Evangelists will say that they're afraid, it's the future, in 6 months it's all over. Anthropic will keep astroturfing on Reddit. CEOs will make even more outlandish claims.

You raised a good point, what's a good metric for LLM performance? There's surely all the benchmarks out there, but aren't they one and done? Usually at release? What keeps checking the performance of those models. At this point it's just by feel. People say models have been dumbed down, and that's it.

I think the actual future is open source models. Problem is, they don't have the huge marketing budget Anthropic or OpenAI does.

Re:Claude Opus 4.7 costs 20–30% more per session by conductr on Friday April 17, 2026 @05:37PM (#47810863)
This is most likely trajectory I fear. It reminds me a lot of Oracle, where they rebrand and reskin products just to change pricing/marketing without adding anything.
Re:Claude Opus 4.7 costs 20–30% more per session by skydhash on Friday April 17, 2026 @06:14PM (#47811164)
Win 10, win 11, all the recent macOS,… could have been released as features and not new products
Re:Claude Opus 4.7 costs 20–30% more per session by conductr on Wednesday April 22, 2026 @11:40AM (#47865190)
My only problem lumping them in is a huge part of those products are the UI and UX. It’s what you interact with as a user. So, a reskin with no new features is a valid version in my opinion.

It’s not always for the best mind you, but I do think major changes to the GUI or UX do deserve a version indicator given they are relatively infrequent. Without some requirement of course.

Nobody buys Oracle because of the UI or upgrades because of a new UI. It’s the underlying tool that matters and if my ugly version is working there is no incentive to upgrade to a prettier version.

Re:Claude Opus 4.7 costs 20–30% more per session by _pdp_ on Friday April 17, 2026 @01:31PM (#47808405)
Re:Claude Opus 4.7 costs 20–30% more per session by mgraczyk on Friday April 17, 2026 @02:42PM (#47809172)
This will probably happen but I wouldn't plan on it happening soon
Re:Claude Opus 4.7 costs 20–30% more per session by nisegami on Friday April 17, 2026 @01:22PM (#47808318)
>IMHO there is a point where incremental model quality will hit diminishing returns.

It's not necessary a single discrete point I think. In my experience, it's tied to the quality/power of your harness and tooling. More powerful tooling has made revealed differences between models that were previously not easy to notice. This matches your display analogy, because I'm essentially saying that the point at which display resolution improvements are imperceptible matters on how far you sit.

Re:Claude Opus 4.7 costs 20–30% more per session by wellthisisgreat on Friday April 17, 2026 @02:18PM (#47808926)
Does anyone here use 8k display for work? Does it make sense over 4k?

I was always wondering where that breaking point for cost/peformance is for displays. I use 4K 27” and it’s noticeably much better for text than 1440p@27 but no idea if the next/ and final stop is 6k or 8k?

Re:Claude Opus 4.7 costs 20–30% more per session by zozbot234 on Friday April 17, 2026 @03:06PM (#47809402)
Even 4k turns out to be overkill if you're looking at the whole screen and a pixel-perfect display. By human visual acuity, 1440p ought to be enough, and even that's taking a safety margin over 1080p to account for the crispness of typical text.
Re:Claude Opus 4.7 costs 20–30% more per session by solenoid0937 on Friday April 17, 2026 @04:00PM (#47809926)
1440p is enough if you haven't experienced anything else. Even the jump from 4k to 5-6k is quite noticeable on a 27" monitor.

I switched to the Studio Display XDR and it is noticeably better than my 4k displays and my 1440p displays feel positively ancient and near unusable for text.

Re:Claude Opus 4.7 costs 20–30% more per session by zozbot234 on Friday April 17, 2026 @05:20PM (#47810697)
That's great for contrast, color fidelity and compatibility with the Apple Mac. But the resolution is quite overkill.
Re:Claude Opus 4.7 costs 20–30% more per session by iLoveOncall on Friday April 17, 2026 @02:00PM (#47808713)
> IMHO there is a point where incremental model quality will hit diminishing returns.

You mean a couple of years ago?

Re:Claude Opus 4.7 costs 20–30% more per session by zadkey on Friday April 17, 2026 @04:34PM (#47810288)
yeah there needs to be a corresponding increment improvement in model archetecture.
Re:Claude Opus 4.7 costs 20–30% more per session by Rapzid on Friday April 17, 2026 @05:49PM (#47810988)
At normal viewing distance(let's say cinema FOV) most people won't see a difference between 4k and 8k never mind 16k.

And it's not that they "don't notice" it's that they physically can't distinguish finer angular separation.

Re:Claude Opus 4.7 costs 20–30% more per session by jasonjmcghee on Friday April 17, 2026 @06:20PM (#47811217)
It's more like, if it gets it right 99% of the time, that sounds incredible.

Until it's making 100k decisions a day and many are dependent on previous results.

Re:Claude Opus 4.7 costs 20–30% more per session by AlfeG on Saturday April 18, 2026 @03:13AM (#47813825)
At this point, I still don't see a reason to use Opus. I'm happy with Sonnet's performance for a third of the price. Tried several times with not a big gain.
Re:Claude Opus 4.7 costs 20–30% more per session by naasking on Saturday April 18, 2026 @09:20AM (#47815701)
Diminishing returns are inevitable, agreed, but it's not clear we're near that point yet.