Like, wouldn't e.g. IPv6 theoretically make "ISP's charging per device in your home" easier, if only a little bit? I know they COULD just do MAC addresses, but still.
Again, my point isn't about what is possible, but what is likely. -- which is MUCH MORE IMPORTANT for the real world.
If we'd started out in an IPv6 world, the defaults would have been "easy to discover unique addresses" and it's reasonable to think that would have made "pay per device" or other negatives that much easier.
> MUCH MORE IMPORTANT
I haven't done the exhaustive research but props in advance for being the only person shouting in caps on HN. Definitely one way to proclaim one's not AI-ness without forced spelling errors.
I'm not an IPv4 apologist though. Clearly the NAT/DHCP assignments from the ISP are essentially the same risk, with just one shallow layer of pseudo-obscurity. I'd rather have IPv6 and remind myself that my traffic is tagged with my customer ID, one way or another.
Unfortunately, I see no real hope that this will ever be mitigated. Incentives are not aligned for any ISP to actually help mask customer traffic. It seems that onion routing (i.e. Tor) is the best anyone has come up with, and I suspect that in today's world, this has become a net liability for a mundane, privacy-conscious user.
So the same as the public IPv4 on a traditional home NAT setup?
They are only supposed to hang on to them for a limited time according to the law where I live (six months AFAIK). Courts are also unwilling to accept IPv4 addresses as proof of identity.
> Tracking visitors doesn’t need to use ip addresses simply because it’s trivial to do so with cookies or browser fingerprinting
Cookies can be deleted. Browser fingerprinting can be made unreliable.
Its not zero privacy either way. Privacy is not a binary. Giving out more information reduces your privacy.
I'd be curious to know the statistics on this: I would hazard to guess that for most ISPs, if your router/modem does not reboot, your IPv4 address (and IPv6 prefix) will not change.
Reboot your router. Asus (with the vendor firmware) allows you do this in a scheduled manner. You'll get a new IPv4 WAN IP (for your NAT stuff) and (with most ISPs) a new IPV6 prefix.
As it stands, if you think NAT hides an individual device, you may have a false sense of security (PDF):
* https://oasis.library.unlv.edu/cgi/viewcontent.cgi?article=1...
I don’t want a static address either (although static addresses should be freely available to those who want them). Having a rotating IP provides a small privacy benefit. People who have upset other people during an online gaming session will understand; revenge DDoS is not unheard of in the gaming world.
This feels like a strawman. If you are making the sort of change that accidentally disables your IPv6 firewall completely, you could accidentally make a change that exposed IPv4 devices as well (accidentally enabling DMZ, or setting up port forwarding incorrectly for example).
It's probably less than three clicks on most home router web UIs.
edit: typo
Are there any (consumer?) firewalls that do not do this? I know Asus do this (and have for years).
AIUI most 'enterprise' firewalls have a default deny shipped from the factory and you have to actively allow stuff.
Do you ever connect your laptop to any network other than your home network? For example, public wifi hotspots, hotel wifi, tech conferences, etc? If so, you need to be running a firewall _on your laptop_ anyway because your router is no longer there to save you from the other people on that network.
It's also a good idea even inside your home network, because one compromised device on your network could then lead to all your other firewall-less devices being exploited.
So here's the thing. My ISP does _not_ rotate my IPv4 address, but _does_ rotate IPv6. Why? I'll never know.
Anyhow. I'm not confused about NAT vs. firewalling. No one who dislikes IPv6 is confused by this.
"No one"; LOL. I've participated in entire sub-threads on HN with people insisting that NAT = security. I've cited well-regarded network educators/commentators and vendors:
* https://blog.ipspace.net/2011/12/is-nat-security-feature/
* https://www.f5.com/resources/white-papers/the-myth-of-networ...
It also explicitly acknowledges that NAT has side effects that resemble security mechanisms.
In typical deployments, those side effects mean internal hosts are not directly addressable from the public internet unless a mapping already exists. That reduces externally reachable attack surface.
So, the disagreement here is mostly semantic. NAT is not a security control in the design sense, but it does have security-relevant effects in practice.
I personally do consider NAT as part of a security strategy. It's sometimes nice to have.
The biggest security-relevant effects of NAT are negative. It makes people think they're protected when they aren't, and when used with port forwarding rules it reduces the search space needed to find accessible servers.
I agree it can be a useful tool in your toolbox sometimes, but a security tool it is not.
What would be the advantage in it?
What would be the disadvantage?
I don't want VPNs between private ranges.
I don't want publically-routable IP addresses on anything.
> What would be the advantage in it?
Not having to deal with ICE/TURN/STUN. Being able to develop P2P applications without having to build out that infrastructure (anyone remember Skype's "supernodes"?).
Big companies would abuse that beyond belief. Back around the late 90s ISPs wanted to have everyone pay per device on their local networks. NAT was part of what saved us from that.
IMO, IPv6 should have given more consideration to the notation. Sure, hex is "better in every way" except when people need to use it. If we could just send the IPv6 designers back in time, they could have made everyone use integer addresses.
# IPv4 - you can ping this
ping 16843009
# IPv6 - if they hadn't broke it :-(
ping 50129923160737025685877875977879068433
# IPv7 - what could have been :-(
ping 19310386531895462985913581418294584302690104794478241438464910045744047689
It's simple, unambiguous, and scales infinitely.This is a joke right? How does it "scale infinitely"? It is clearly ambiguous in your ipv7 example.
But with IPv6 a single device may have multiple addresses, some of which it just changes randomly. So this idea that they'll then know how many devices you have and be able to pay per device isn't really feasible in IPv6.
A single /64 being assigned to your home gives you over 18 quintillion addresses to choose from.
If the ISP really wanted to limit devices they'd rely on only allowing their routers and looking at MAC addresses, but even then one can just put whatever to route through that and boom it's a single device on the ISP's lan.
Suddenly, your smart lightbulb is accessible by everyone. Not a great idea.
> With IPv6, if you want a peer-to-peer connection between firewalled peers, you do a quick UDP hole punch and you're done - since everything has a unique IP, you don't even need to worry about remapping port numbers.
There is no guarantee with IPv6 that hole punching works. It _usually_ does like with IPv4.
The answer here is kinda that Wi-Fi isn't an appropriate networking protocol for lightbulbs (or most other devices that aren't high-bandwidth) in the first place.
Smart devices that aren't high bandwidth (i.e. basically anything other than cameras) and that don't need to be internet accessible outside of a smart home controller should be using one of Z-Wave/Zigbee/Thread/LoRaWAN depending on requirements, but basically never Wi-Fi.
A firewall solves that issue, IPv4 or IPv6.
I finally have IPv6 at home but I am being very cautious about enabling it because I don't really know what the implications are, and I do not trust the defaults.
> Suddenly, your smart lightbulb is accessible by everyone. Not a great idea.
Why would it be "accessible by everyone"? My last ISP had IPv6 and my Asus (with the vendor firmware) didn't allow it. My printer automatically picked up an IPV6 address via SLACC and it was not "accessible by everyone" (I tried connecting to it externally).
NAT may work fine for your setup, but it can be a huge headache for some users, especially users on CGNAT. How many years of human effort have gone towards unnecessary NAT workarounds? With IPv6, if you want a peer-to-peer connection between firewalled peers, you do a quick UDP hole punch and you're done - since everything has a unique IP, you don't even need to worry about remapping port numbers.
Your ISP shouldn't be rotating your /64, although unfortunately many do since they are still IPv4-brained when it comes to prefix assignment. Best practice is to assign a static /56 per customer, although admittedly this isn't always followed.
And if you don't need a /48... don't use it? 99.99% of home customers will just automatically use the first /64 in the block, and that's totally fine. There's a ton of address space available, there's no drawback to giving every customer a /56 or even a /48.