News for hackers. Stuff that matters.
Re:InventWood is about to mass-produce wood that's stronger ... by gwbas1c on Monday May 19, 2025 @11:40AM (#44031013)
> Ultimately, InventWood is planning to use wood chips to create structural beams of any dimension that won’t need finishing. “Imagine your I-beams look like this,” Lau said, holding up a sample of Superwood. “They’re beautiful, like walnut, ipe. These are the natural colors. We haven’t stained any of this.”

Show the [beep]ing picture!

Re:InventWood is about to mass-produce wood that's stronger ... by rented_mule on Monday May 19, 2025 @12:06PM (#44031305)
The picture at the top of the article appears representative of the surface appearance: https://www.inventwood.com/superwood-beams
Re:InventWood is about to mass-produce wood that's stronger ... by bjt on Monday May 19, 2025 @12:12PM (#44031372)
I know it's practically cliche to say so these days, but that picture is giving strong AI vibes. Look at the joints between the big beams. If you needed beams that large to hold up a building, you wouldn't cut them in the middle like that. And you wouldn't have those gaps.

Plus, all the text on the page is future tense, talking about what the super wood beams will be able to do.

So I don't know how much that picture really represents what the wood will look like.

Re:InventWood is about to mass-produce wood that's stronger ... by MichaelDickens on Monday May 19, 2025 @12:14PM (#44031390)
I'm almost positive it's AI generated. Look at the chairs at the kitchen island in the background. No human would draw chairs that look like that.

The picture at https://www.inventwood.com/superwood-facade also looks AI-generated.

The fact that they're using AI images on their landing pages does not give me confidence in the quality of the product.

Re:InventWood is about to mass-produce wood that's stronger ... by SubiculumCode on Monday May 19, 2025 @12:44PM (#44031689)
What about this one? https://www.inventwood.com/superwood-beams

There are lots of posts from them on the internet image search...and it seems they've gone to a number of industry conferences with samples. I agree, that from a PR perspective, their pictures are too polished. They should show a piece in a less polished format.

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @12:54PM (#44031824)
At this point I'd say I have <5% confidence any image on their site is of an actual sample as opposed to a 3d render, or worse, AI slop.

Edit: Even the photos of wood on a truck is obviously AI garbage when you zoom in: https://images.squarespace-cdn.com/content/v1/67160715a896dc...

Re:InventWood is about to mass-produce wood that's stronger ... by SubiculumCode on Monday May 19, 2025 @01:09PM (#44032027)
wow that image is pretty bad; all sorts of weird inconsistencies in the wood stack that scream AI; I'm ignoring the license gibberish as that could be just removal of identifying info.

What about this: https://www.newhometrendsinstitute.com/consumer-insights/ind...

the image is low resolution, but appears to be from an actual trade show, and an image not from the company.

Re:InventWood is about to mass-produce wood that's stronger ... by whyenot on Monday May 19, 2025 @01:03PM (#44031943)
What is going on with the window reflections (for superwood-facade)? It doesn't look right.
Re:InventWood is about to mass-produce wood that's stronger ... by willidiots on Monday May 19, 2025 @06:13PM (#44035491)
Some of them literally have "visualelectric" in the filename.

(ex: https://images.squarespace-cdn.com/content/v1/67160715a896dc...)

Re:InventWood is about to mass-produce wood that's stronger ... by bee_rider on Monday May 19, 2025 @12:25PM (#44031513)
There’s also an image a bit down the page:

https://www.inventwood.com/technology

But I’m not sure if it a real photo or some sort of… analogy? Under “INTRODUCING SUPERWOOD: THE NEXT GENERATION OF BUILDING MATERIALS,” we can see one piece that looks like an actual piece of wood, and then some other ones that looks like an artificial wood-looking finish wrapped around some core which visually looks metallic (but which, I assume, is actually their engineered wood).

I dunno. I guess “being wood” is more about the ecological impact in this case. If it is replacing steel and it looks ugly, well, a lot of steel looks ugly and then gets covered up.

Re:InventWood is about to mass-produce wood that's stronger ... by csallen on Monday May 19, 2025 @12:39PM (#44031638)
Oh it's 100% AI generated. Look at the back brown leather chair to the right. It's supposed to have a blanket on it, but instead it's a garbled mess
Re:InventWood is about to mass-produce wood that's stronger ... by leptons on Monday May 19, 2025 @01:38PM (#44032446)
Yeah, inspecting the picture closely there are at least 20 to 30 things that immediately stand out as "AI did this". There are so many things wrong with those chairs on the right. The wood support beams are just not right, nobody would build like this.
Re:InventWood is about to mass-produce wood that's stronger ... by Saris on Monday May 19, 2025 @12:25PM (#44031503)
That really looks like it's AI generated. Not a good look for a company claiming to make something!
Re:InventWood is about to mass-produce wood that's stronger ... by bufferoverflow on Monday May 19, 2025 @01:37PM (#44032428)
That's an AI generated image

They didn't even bother to AI-upscale it to get rid of the artifacts

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @12:47PM (#44031735)
This is so spot on. The fact that there isn't a single image showing an ACTUAL comparison, even of small samples, is a massive red flag for a company that is advocating the "aesthetic" properties of it's product.

Then, even worse, they RELY ENTIRELY ON UNLABELED AI GENERATED IMAGES.

I cannot imagine a better way to say "there's a high chance everything we've promised is fake news". Just make sure to squint before looking at our ad copy!

Re:InventWood is about to mass-produce wood that's stronger ... by Animats on Monday May 19, 2025 @03:09PM (#44033607)
This is a relaunch. Here's their launch video from May 2024.[1] The video has some CG of a piece of their wood, plus stock shots of trees, cities, wind turbines, people looking through microscopes, etc.

U. of Maryland announced this specific process back in 2018.[2] They got a paper into Nature.[3]

Densified wood is over a century old. [4] You can buy something called "Lignostone".[5] But that is a material where they took the lignin out and put some plastic in. (Remember "transparent wood" from a few years ago. Same concept, with a transparent plastic.) This new process takes the lignin out and compresses the cell structure.

If you could send in $20 and get a little cube of the stuff to look at and test, this would be more convincing.

[1] https://www.youtube.com/watch?v=JiHABi97rU8

[2] https://www.thechemicalengineer.com/news/new-densified-wood-...

[3] https://www.nature.com/articles/nature25476

[4] https://jwoodscience.springeropen.com/articles/10.1186/s1008...

[5] https://www.roechling.com/us/industrial/lignostone

Re:InventWood is about to mass-produce wood that's stronger ... by echelon on Monday May 19, 2025 @12:54PM (#44031835)
This video is what you're looking for:

https://youtu.be/96Dz-rQtGxI

Here's someone from the InventWood team talking about the product, uses, future, and more at a trade show.

They show a hands-on demo of the wood product and give an animation of the process.

The talk is pretty illuminating. They think this will even be used in the automotive sector in places where carbon fiber is currently utilized.

This is way better than the press coverage and actual website.

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:02PM (#44031940)
Thanks for the link! As pessimistic as I am toward this company it sounds like something that could be quite neat if it actually exists.

However, I lost all hope (of the little I had) after their sales rep said they "densify" their wood. My dude, if you need to spin so hard you pull out a thesaurus for "compress" it's not a great look.

Re:InventWood is about to mass-produce wood that's stronger ... by SR2Z on Monday May 19, 2025 @01:10PM (#44032055)
Because they don't just compress their wood! That's the step after putting it in a vacuum and baking it and heating it up so that the lignin depolymerizes. The video does a great job of explaining how this is different from just sticking wood into a press.
Re:InventWood is about to mass-produce wood that's stronger ... by rendall on Monday May 19, 2025 @02:33PM (#44033139)
Re:InventWood is about to mass-produce wood that's stronger ... by shkkmo on Monday May 19, 2025 @01:11PM (#44032060)
> However, I lost all hope (of the little I had) after their sales rep said they "densify" their wood.

You lost hope because they used an industry standard term?

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:20PM (#44032194)
Sure did. You're right it seems to be in use widely (in the wood compression industry), not that it seems to have any distinction from compression... (I say from my uninformed perspective)

E.g. it feels along the lines of "we didn't just heat it, we THERMO-MODIFIED (tm) it." No matter they mean the same thing, doesn't the second one just sound cooler?!? /s

Same ilk as "deconstructed" food, "artisanal" crafts, "synergy", ...

Re:InventWood is about to mass-produce wood that's stronger ... by 8note on Monday May 19, 2025 @01:29PM (#44032306)
cooked and warm are of course, indistinguishable.

in a mechanical sense, a compressed object goes back to normal when the stress is removed, unless you break it. if the work piece did not go back to its original shape, you arent just conpressing anymore. eg. you are likely "cold working" it instead.

if youre applying heat, you might be "forging" or "casting" while applying that compressive force.

theyre all quite distinct

Re:InventWood is about to mass-produce wood that's stronger ... by mrtesthah on Monday May 19, 2025 @01:28PM (#44032296)
You’re sure eager to judge considering how much knowledge you lack on the subject.
Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:40PM (#44032482)
I definitely am negatively biased toward anything I perceive using buzz words or jargon. I doubt I'm the only person with this knee jerk reaction (I say without any statistics or evidence I can link in).

Same with any product that is over or deceptively advertised.

If their stuff was good, provably so, then they'd prove it on their own merits. They wouldn't need to fill a website with 99% AI slop if they had anything else of any substance.

Or, it's definitely possible I'm in the % of people who is overly sensitive to bullshit, and I fall outside the target audience of their AI slop. Similarly to how spam emails include typos to filter out people who are actually paying attention.

Re:InventWood is about to mass-produce wood that's stronger ... by all2 on Monday May 19, 2025 @02:12PM (#44032880)
> I definitely am negatively biased toward anything I perceive using buzz words or jargon.

Unfortunately every profession with any depth of knowledge will have jargon. Even house staff at a restaurant will talk about 2-tops and 4-tops, etc. It's just jargon, or better yet, convenient abstraction to describe the problem space these people live and breath.

Re:InventWood is about to mass-produce wood that's stronger ... by jrowen on Monday May 19, 2025 @02:11PM (#44032861)
This is an extreme overreaction to usage of a regular word that literally describes what they are doing. "Compress" would have been less accurate.

Say what you will about the website but the video is a pretty reasonable sales demo.

Re:InventWood is about to mass-produce wood that's stronger ... by 542354234235 on Tuesday May 20, 2025 @10:14AM (#44041931)
The more layman’s wording you use, the less accurate you will be. The reason for industry specific “jargon” is just that those are words that happen to be the most accurate and descriptive words for whatever materials or processes used.

If you use too much jargon, people outside can’t understand what you are talking about. If you use too little jargon, then whatever you are talking about will be too vague.

Re:InventWood is about to mass-produce wood that's stronger ... by mmooss on Monday May 19, 2025 @07:57PM (#44036295)
People use more specific terms because they mean something more specific than the generic term. Often within domains of expertise, people know the topic extremely well so they naturally use specific terms, and they also need to speak very specifically.
Re:InventWood is about to mass-produce wood that's stronger ... by kmacdough on Monday May 19, 2025 @05:37PM (#44035157)
The more exciting something would be, the more likely it's BS. It's what survives.

Projects just make it a lot further that way. The consumer wants to believe. The doer has to believe. The invester will take a hit on the cheek for the moon.

Re:InventWood is about to mass-produce wood that's stronger ... by cutemonster on Monday May 19, 2025 @05:30PM (#44035101)
Didn't intend to watch all of it but I did! Thanks for the link
Re:InventWood is about to mass-produce wood that's stronger ... by theragra on Tuesday May 20, 2025 @02:24PM (#44044409)
Looks awesome, I want it already ;)
Re:InventWood is about to mass-produce wood that's stronger ... by RIMR on Monday May 19, 2025 @05:03PM (#44034831)
Where are you seeing AI generated images? https://www.inventwood.com/ seems to have several real pictures of the product.
Re:InventWood is about to mass-produce wood that's stronger ... by gsaussy on Monday May 19, 2025 @12:47PM (#44031736)
Yes the final product will preserve the wood grain in some form. The paper has a few images of the final product. They basically boil out all the non-cellulose and compress what remains into a smaller form. I assume the strength is that a super board of the same size would be made of several boards' worth of wood fibers. I haven't read enough yet, but I wonder if this substantially lowers weight / strength. Right now, steel is required for tall buildings because there is an upper limit to how high you can go before wood buckles. There are no 300 m trees after all.

fwiw, I first thought this was going to be some innovation in glue, which allows manufacturers to turn wood chips and sawdust into MDF, OSB, and particle board. These are typically weaker than sawyered beams of the same size because the glue is not as strong as the cellulose fibers that run the length of a beam. (However, they are getting applied more and more in the construction in the US because it is crazy expensive to find a tree that can produce thick enough 40 ft beams, but you can easily get enough sawdust to make an even thicker, precut MDF board.) But I thought no shot, because if you can make glue that is stronger than cellulose, then why bother with the wood?

Re:InventWood is about to mass-produce wood that's stronger ... by some_random on Monday May 19, 2025 @12:47PM (#44031747)
Someone posted what's probably the study it's based on below, it looks to be Figure 2d and 10e. As suggested, it's just darkened in a nice looking way (without stain) which frankly doesn't seem like it's necessarily a good thing.

https://www.fpl.fs.usda.gov/documnts/pdf2018/fpl_2018_song00...

Re:InventWood is about to mass-produce wood that's stronger ... by m463 on Monday May 19, 2025 @03:41PM (#44033970)
Re:InventWood is about to mass-produce wood that's stronger ... by gwbas1c on Monday May 19, 2025 @08:01PM (#44036312)
Normally when you quote someone, and they are making reference to a picture, the picture is logically close close to the words referencing the content in the picture.
Re:InventWood is about to mass-produce wood that's stronger ... by m463 on Monday May 19, 2025 @08:03PM (#44036323)
I meant wasn't that a non-ai-generated picture of the actual product?
Re:InventWood is about to mass-produce wood that's stronger ... by downboots on Monday May 19, 2025 @05:47PM (#44035249)
"The company treats it with 'food industry' chemicals"