News for hackers. Stuff that matters.
Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @12:47PM (#44031735)
This is so spot on. The fact that there isn't a single image showing an ACTUAL comparison, even of small samples, is a massive red flag for a company that is advocating the "aesthetic" properties of it's product.

Then, even worse, they RELY ENTIRELY ON UNLABELED AI GENERATED IMAGES.

I cannot imagine a better way to say "there's a high chance everything we've promised is fake news". Just make sure to squint before looking at our ad copy!

Re:InventWood is about to mass-produce wood that's stronger ... by Animats on Monday May 19, 2025 @03:09PM (#44033607)
This is a relaunch. Here's their launch video from May 2024.[1] The video has some CG of a piece of their wood, plus stock shots of trees, cities, wind turbines, people looking through microscopes, etc.

U. of Maryland announced this specific process back in 2018.[2] They got a paper into Nature.[3]

Densified wood is over a century old. [4] You can buy something called "Lignostone".[5] But that is a material where they took the lignin out and put some plastic in. (Remember "transparent wood" from a few years ago. Same concept, with a transparent plastic.) This new process takes the lignin out and compresses the cell structure.

If you could send in $20 and get a little cube of the stuff to look at and test, this would be more convincing.

[1] https://www.youtube.com/watch?v=JiHABi97rU8

[2] https://www.thechemicalengineer.com/news/new-densified-wood-...

[3] https://www.nature.com/articles/nature25476

[4] https://jwoodscience.springeropen.com/articles/10.1186/s1008...

[5] https://www.roechling.com/us/industrial/lignostone

Re:InventWood is about to mass-produce wood that's stronger ... by echelon on Monday May 19, 2025 @12:54PM (#44031835)
This video is what you're looking for:

https://youtu.be/96Dz-rQtGxI

Here's someone from the InventWood team talking about the product, uses, future, and more at a trade show.

They show a hands-on demo of the wood product and give an animation of the process.

The talk is pretty illuminating. They think this will even be used in the automotive sector in places where carbon fiber is currently utilized.

This is way better than the press coverage and actual website.

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:02PM (#44031940)
Thanks for the link! As pessimistic as I am toward this company it sounds like something that could be quite neat if it actually exists.

However, I lost all hope (of the little I had) after their sales rep said they "densify" their wood. My dude, if you need to spin so hard you pull out a thesaurus for "compress" it's not a great look.

Re:InventWood is about to mass-produce wood that's stronger ... by SR2Z on Monday May 19, 2025 @01:10PM (#44032055)
Because they don't just compress their wood! That's the step after putting it in a vacuum and baking it and heating it up so that the lignin depolymerizes. The video does a great job of explaining how this is different from just sticking wood into a press.
Re:InventWood is about to mass-produce wood that's stronger ... by rendall on Monday May 19, 2025 @02:33PM (#44033139)
Re:InventWood is about to mass-produce wood that's stronger ... by shkkmo on Monday May 19, 2025 @01:11PM (#44032060)
> However, I lost all hope (of the little I had) after their sales rep said they "densify" their wood.

You lost hope because they used an industry standard term?

Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:20PM (#44032194)
Sure did. You're right it seems to be in use widely (in the wood compression industry), not that it seems to have any distinction from compression... (I say from my uninformed perspective)

E.g. it feels along the lines of "we didn't just heat it, we THERMO-MODIFIED (tm) it." No matter they mean the same thing, doesn't the second one just sound cooler?!? /s

Same ilk as "deconstructed" food, "artisanal" crafts, "synergy", ...

Re:InventWood is about to mass-produce wood that's stronger ... by 8note on Monday May 19, 2025 @01:29PM (#44032306)
cooked and warm are of course, indistinguishable.

in a mechanical sense, a compressed object goes back to normal when the stress is removed, unless you break it. if the work piece did not go back to its original shape, you arent just conpressing anymore. eg. you are likely "cold working" it instead.

if youre applying heat, you might be "forging" or "casting" while applying that compressive force.

theyre all quite distinct

Re:InventWood is about to mass-produce wood that's stronger ... by mrtesthah on Monday May 19, 2025 @01:28PM (#44032296)
You’re sure eager to judge considering how much knowledge you lack on the subject.
Re:InventWood is about to mass-produce wood that's stronger ... by noitpmeder on Monday May 19, 2025 @01:40PM (#44032482)
I definitely am negatively biased toward anything I perceive using buzz words or jargon. I doubt I'm the only person with this knee jerk reaction (I say without any statistics or evidence I can link in).

Same with any product that is over or deceptively advertised.

If their stuff was good, provably so, then they'd prove it on their own merits. They wouldn't need to fill a website with 99% AI slop if they had anything else of any substance.

Or, it's definitely possible I'm in the % of people who is overly sensitive to bullshit, and I fall outside the target audience of their AI slop. Similarly to how spam emails include typos to filter out people who are actually paying attention.

Re:InventWood is about to mass-produce wood that's stronger ... by all2 on Monday May 19, 2025 @02:12PM (#44032880)
> I definitely am negatively biased toward anything I perceive using buzz words or jargon.

Unfortunately every profession with any depth of knowledge will have jargon. Even house staff at a restaurant will talk about 2-tops and 4-tops, etc. It's just jargon, or better yet, convenient abstraction to describe the problem space these people live and breath.

Re:InventWood is about to mass-produce wood that's stronger ... by jrowen on Monday May 19, 2025 @02:11PM (#44032861)
This is an extreme overreaction to usage of a regular word that literally describes what they are doing. "Compress" would have been less accurate.

Say what you will about the website but the video is a pretty reasonable sales demo.

Re:InventWood is about to mass-produce wood that's stronger ... by 542354234235 on Tuesday May 20, 2025 @10:14AM (#44041931)
The more layman’s wording you use, the less accurate you will be. The reason for industry specific “jargon” is just that those are words that happen to be the most accurate and descriptive words for whatever materials or processes used.

If you use too much jargon, people outside can’t understand what you are talking about. If you use too little jargon, then whatever you are talking about will be too vague.

Re:InventWood is about to mass-produce wood that's stronger ... by mmooss on Monday May 19, 2025 @07:57PM (#44036295)
People use more specific terms because they mean something more specific than the generic term. Often within domains of expertise, people know the topic extremely well so they naturally use specific terms, and they also need to speak very specifically.
Re:InventWood is about to mass-produce wood that's stronger ... by kmacdough on Monday May 19, 2025 @05:37PM (#44035157)
The more exciting something would be, the more likely it's BS. It's what survives.

Projects just make it a lot further that way. The consumer wants to believe. The doer has to believe. The invester will take a hit on the cheek for the moon.

Re:InventWood is about to mass-produce wood that's stronger ... by cutemonster on Monday May 19, 2025 @05:30PM (#44035101)
Didn't intend to watch all of it but I did! Thanks for the link
Re:InventWood is about to mass-produce wood that's stronger ... by theragra on Tuesday May 20, 2025 @02:24PM (#44044409)
Looks awesome, I want it already ;)
Re:InventWood is about to mass-produce wood that's stronger ... by RIMR on Monday May 19, 2025 @05:03PM (#44034831)
Where are you seeing AI generated images? https://www.inventwood.com/ seems to have several real pictures of the product.