I'm just saying as far as service level and amount of data on plans, I personally was content with 3G levels. There's so much advertising pushing us into churning for technolust incrementalist spec-chasing, that I find completely uncompelling as what really defines my devices' capabilities is software freedom.
This is what I think may be the source of confusion, since you can’t say, build your own cellar device and tap into Verizon’s network without their authorization, like you can with AM or FM radio waves
Just because AM is easy to transmit or receive in any band, doesn’t mean you’re allowed to.
The matter reminds me a bit of copyright law about 40 years ago, back then the GP was hardly aware that copyright existed, nowadays it may not be much the wiser but it at least knows one can't just copy works without permission.
EMI and spectrum management is in a similar position to copyright of 40 years ago. It will be a long slow process to bring the GP up to speed. First we have to begin training electrical engineers in the subject as at present only a handful actually understand the subject at any depth.
AM is unique in its propagation. It can travel very far very easily and even bounce off the ionosphere in "shortwave" AM situations. It's hard to imagine any form of broadcast radio beating AM at its own game here.
Satellite radio could work, but satellites are a lot more expensive than a radio tower.
I wonder if the car manufacturers could get around this by offering free handheld AM radios? In bulk, they probably cost less than $10.
AM is 530 kHz – 1700 kHz, using 10 kHz spacing
FM is 87.9 MHz to 107.9 Mhz with 200kHz spacing.
IMHO, there are enough AM driver information stations that I would be upset when I eventually learned I couldn't receive them on a car with no AM radio. But it might take several years for that (especially if it's an EV; I'm not taking that into the mountains, probably)
Why not?
Why would you be out of gas in the mountains in the first place? Because you got snowbound and ran the car every couple hours to get some heat out of it.
Nobody in Bumfuck, Nowhere is going to have the tools or technicians to try to repair an EV. It will likely be a long and expensive tow to somewhere that does.
> Because you got snowbound and ran the car every couple hours to get some heat out of it.
Complete tangent, but how do EVs handle low-traction surfaces? Seems like they might do better on average from the weight, but that’s a wild guess on my part.
The real danger on highways is traction control. It can hide how slippery the road is and allows you to easily outrun your braking ability.
In the northern Midwest, you’ll see car after car in the ditch when it hasn’t snowed in a while.
As for people forgetting how to drive in the snow over the summer? That seems to be universal. Seen it in Ohio, Massachusetts, Vermont, and New Hampshire.
I can take gas cans to enhance range of an ICE, if conditions are marginal. There's no way to enhance the range of an EV.
exclusive of digital modes, the most distance effective signal is CW. unmodulated signal, on or off.
AM uses a significantly lower frequency and ground wave propagation is much more likely which gives AM the benefit of being able to reach "over the horizon" where FM simply cannot.
FM is a phase modulation scheme, so random noise is largely discarded, as instead you have a phase tracker tracking frequency modulation.
Basically AM will always have noise, but because of how simple it is unless the frequency is being totally trampled on you can get * something* from it.
FM by contrast will have almost perfect tracking with very low audible noise in the output… right up until the PLL loses tracking and you lose it all.
It is not about who has been around sooner, or who is more important, but what degrades in the presence of what.
Why? It not ought to be if you know what you are doing!
It seems a great shame that universities don't teach electromagnetic shielding and screening in digital electronics, or if they do they only gloss over it. Once it was a core subject and everyone understood its importance. Moreover, the failure to teach EMR shielding techniques in 101 electrical engineering has been an ongoing saga for decades, it's why digital people end up with little or no concept of the issues that confront engineering in the small-signal analog world.
This lack of training and the failure to emphasize the importance of proper spectrum management, which, in short, is the science of using RF frequencies efficiently without causing interference, is the principal reason why digital people don't seem to give a damn about the RF/EMR pollution and noise emitted from their switching circuits. Now opportunistic EV manufactures have the damned hide to try to sweep away the last vestiges of prudent spectrum management.
Fact: if you cannot listen to a normal broadcast AM radio transmission within its authorized service area on a car radio then the EV's electronics is polluting and radiating noise beyond normal acceptable limits. QED.
One sees crappy almost non-existent shielding everywhere from domestic electronics through to huge Tesla coils that completely block out swathes of radio spectrum for many tens of kilometres. Under ITU and national spectrum management laws such behavior is supposed to unlawful but no one including the FCC does anything of consequence about it (once if you emitted radio noise you'd soon find radio inspectors clambering all over your equipment with RF noise detectors).
Over the past 40 or so years the electromagnetic spectrum, especially HF frequencies, has, in parts, become almost unworkable because of crappy noise from digital electronics and the principal polluters are those in the digital electronics world. Let's be clear what we are talking about here: they are polluters and it's pollution like any other green issue—think of oil spills, chemical residues, nuclear waste, now add to that list electromagnetic pollution.
About 20 years back NATO did a report that indicated the background noise floor on the HF spectrum had been raised by about 6 to 8dB because of unwanted electrical noise. Several years back at a SMPTE engineering exhibition I quoted this figure to the chief engineer of a manufacturer of HF transmitters and he looked at me with surprise and asked where had I been in recent years, he then informed me that the then current noise figure had risen to about 17dB!
That level of EMR pollution is outrageous, it's clear that parts of the RF electromagnetic spectrum are already unusable.
Imagine how bad the EMR pollination will be if these bastard EV manufactures get their way and when there are millions of EVs on the road without adequate EMR suppression. Not only will all long wave, AM and HF bands be unusable but so too will large sections of the VHF band.
For those who don't understand the problem let me put it into perspective. These EMR shielding problems were solved in the 1930s when aircraft used HF radio (≈3-30MHz). Aircraft HF radio receivers have to be about an order of magnitude more sensitive than normal domestic AM radios because the incoming signals are so much weaker. That didn't deter RF engineers of the day, now all aircraft electronics are properly shielded.
So what's wrong with the EV engineers? It seems to me it's a combination of cost-cutting and ignorance.
This law must succeed!
__
A few basic references for the untrained:
MIT Radiation Laboratory Series vol 23 - Microwave Receivers, Ed: S.N. Van Voorhis, 1948.
Noise Reduction Techniques in Electronic Systems, Ott, Henry. W, 1976, Wiley.
Thanks for the history, precedents and references.
Well, back then radio inspectors didn't have to fear getting shot.
Snark aside: it's only getting worse every day. Temu, Wish, Alibaba, Amazon dropshippers - almost none of the stuff they sell has passed any kind of compliance audits, and they aren't even required if the device in question isn't intended to participate in RF communication. That is the real culprit... all these billions upon billions of small devices with high frequency voltage regulators that all act as (very) tiny RF emitters.
And even if you'd begin to teach about shielding and EM suppression in electronics design courses, it would be pretty useless against the infamous magics of "gongkai". Just look at this $12 phone [1] - no RF shielding anywhere despite the thing literally being a cellphone. And yet if I were to order one of these, even an entire batch, chances are high no one would ever stop me.
[1] https://www.bunniestudios.com/blog/the-12-gongkai-phone/
True, but as I just posted to buescher we, as a society, will have to rethink the EMI problem and this will change the whole approach to electrical engineering per se. Protecting the electromagnetic spectrum will need to be considered of paramount importance (as our communications infrastructure depends on protecting it).
Like chemical engineers, considering the effects of EMI pollution levels will have to become the first step in any electrical/electronic project.
This also means tighter regulation and possibly new laws.
I wouldn't be that sure.
Yes, there is a lot of garbage and congestion on the spectrum, but thanks to new approaches to (forward) error correction, higher quality RF parts and especially the explosion of compute power, we can achieve ridiculous communication quality. And it's not new either - GPS is orders of magnitude below the noise floor, and yet, we got "smart collars" for cats and even birds capable of decoding that signal.
Pretty much the only ones who actually have a problem with all the garbage are hams, and to a lesser extent air traffic control (for them, it's mostly people with garbage handheld radios, and dumb pilots not switching from ATC to onboard communications).
Agreed, but that noise can be contained with an effective Faraday screening.
If noise escapes then the shielding isn't working properly.
It seems to me that electrical engineers—especially those working in high speed digital electronics—need to think like chemical engineers who spend much of their time in the containment business. Safely containing dangerous polluting liquids and gasses is a basic premise in chemistry. Most of the engineering infrastructure of large chemical plants is involved with containing chemicals and doing so in ways that are safe and do not pollute the environment.
On the other hand, electrical engineers have a dangerous waste product—EMI—that they'd rather forget about. Well, I suggest that in today's world that thinking is just not good enough.
Put another way, when building electrical/electronic systems start with the foundation which is to ask what pollution or damage will this project cause. The first question is to ask yourselves what are the shielding/EMR requirements for this project. Chemical and civil engineers start with such requirements as a matter of form and good practice. So should electrical engineers (you do this now re electrical safety, so you just have to extend that thinking to RFI).
It's now time electrical engineers started to work in the same way. RF shielding and protecting the electromagnetic spectrum should no longer be considered an inconvenience and afterthought but as a major component of the project.
BTW, by adopting good shielding practices you'll be preparing yourselves for the next Carrington Event. Remember RF shielding works both ways—in and out!
I don’t think car manufacturers are saying they don’t know how to shield, they’re saying it would come at a cost:
"Requiring the installation of analog AM radios in automobiles is an unnecessary action that would impact EV range, efficiency and affordability at a critical moment of accelerating adoption," -the fine article
I smell short-term thinking here and concern over their current problem of falling profits from EVs
Cellular, WiFi, and Bluetooth are vendor-agnostic. The issue is there's finite radio bandwidth and because the radios are vendor-agnostic they all need to built to a specification. Interop between cellular basebands made by a variety of players and base stations made by yet more players is already a minor technological miracle.
Old AMPS phones want to use the bands carriers moved to 4G/5G service. There's no affordance for backwards compatibility because the old technology was just shittier. The bandwidth of a single AMPS phone can now carry many dozens of 5G connections and provide them with full service.
If you want to goof with electronics in your garage the only person you're going to affect is yourself. When you start messing with radios, the emissions are invisible. You don't necessarily realize you just raised the noise floor for your whole neighborhood. It's pretty easy to build a device that barely functions as a radio but works really well as a jamming device.
The analogy to the Internet I'm making is this: yes, the protocols are open and you can theoretically participate with "the Internet" using even a potato, as long as it speaks TCP/IP. This is the decentralized, packet-switching, "routing around censorship" part. It's also not the part that matters - the actual Internet is the application layer, and it's in large part centralized in entities like Meta, Google (and on a different dimension, Cloudflare). Packet switching won't help your Facebook page to "route around censorship" when Meta itself is the censor.
To do anything on cellular bands requires a license. Consumer equipment is locked down to get type licenses. Carriers need their own separate licenses from the FCC or local equivalent. You can build your own basebands but you can't do anything without a license. No carrier, paying for licenses and operating the network, is going to freely connect you to their infrastructure. People have collectively decided cellular networks is more valuable/useful to modern society than being able to goof around with scratch built cellular radios. There's other bands open to experimentation (ISM).
Complaining about Google and Meta is likewise confusing. Meta and Google can censor whatever they like. They don't owe you a bullhorn. But they do not control the whole Internet. If you can get packets routing to you, you can still publish whatever content you want. You can build your own application layer completely ignoring Google and Meta. There's dozens of overlay networks built on top of base Internet routing that work just fine.
For now I'm enjoying the free satelite radio trial.
You could make the argument that "physical buttons are safer," but that doesn't mean the UI that accompanied these buttons was that great.
Most vehicles pre-touchscreen had vehicle control functions on shitty jog wheels or arrow buttons on the steering wheel (maybe with a 7 segment display, maybe an LCD.)
Right, it's really a damn nuisance. I want to change the radio and it's nigh on impossible.
I've got an AM/FM radio that's 20-30 years old and it still works. At some point it would be nice if we could get back to vendor-agnostic wireless protocols that aren't obsolete every 10 years. Until we have such a thing deprecating AM seems premature.