News for hackers. Stuff that matters.
Re:Am radio law opposed by tech and auto industries is close... by hilbert42 on Sunday May 05, 2024 @01:58AM (#40262613)
"AM reception in EVs is a feat of engineering."

Why? It not ought to be if you know what you are doing!

It seems a great shame that universities don't teach electromagnetic shielding and screening in digital electronics, or if they do they only gloss over it. Once it was a core subject and everyone understood its importance. Moreover, the failure to teach EMR shielding techniques in 101 electrical engineering has been an ongoing saga for decades, it's why digital people end up with little or no concept of the issues that confront engineering in the small-signal analog world.

This lack of training and the failure to emphasize the importance of proper spectrum management, which, in short, is the science of using RF frequencies efficiently without causing interference, is the principal reason why digital people don't seem to give a damn about the RF/EMR pollution and noise emitted from their switching circuits. Now opportunistic EV manufactures have the damned hide to try to sweep away the last vestiges of prudent spectrum management.

Fact: if you cannot listen to a normal broadcast AM radio transmission within its authorized service area on a car radio then the EV's electronics is polluting and radiating noise beyond normal acceptable limits. QED.

One sees crappy almost non-existent shielding everywhere from domestic electronics through to huge Tesla coils that completely block out swathes of radio spectrum for many tens of kilometres. Under ITU and national spectrum management laws such behavior is supposed to unlawful but no one including the FCC does anything of consequence about it (once if you emitted radio noise you'd soon find radio inspectors clambering all over your equipment with RF noise detectors).

Over the past 40 or so years the electromagnetic spectrum, especially HF frequencies, has, in parts, become almost unworkable because of crappy noise from digital electronics and the principal polluters are those in the digital electronics world. Let's be clear what we are talking about here: they are polluters and it's pollution like any other green issue—think of oil spills, chemical residues, nuclear waste, now add to that list electromagnetic pollution.

About 20 years back NATO did a report that indicated the background noise floor on the HF spectrum had been raised by about 6 to 8dB because of unwanted electrical noise. Several years back at a SMPTE engineering exhibition I quoted this figure to the chief engineer of a manufacturer of HF transmitters and he looked at me with surprise and asked where had I been in recent years, he then informed me that the then current noise figure had risen to about 17dB!

That level of EMR pollution is outrageous, it's clear that parts of the RF electromagnetic spectrum are already unusable.

Imagine how bad the EMR pollination will be if these bastard EV manufactures get their way and when there are millions of EVs on the road without adequate EMR suppression. Not only will all long wave, AM and HF bands be unusable but so too will large sections of the VHF band.

For those who don't understand the problem let me put it into perspective. These EMR shielding problems were solved in the 1930s when aircraft used HF radio (≈3-30MHz). Aircraft HF radio receivers have to be about an order of magnitude more sensitive than normal domestic AM radios because the incoming signals are so much weaker. That didn't deter RF engineers of the day, now all aircraft electronics are properly shielded.

So what's wrong with the EV engineers? It seems to me it's a combination of cost-cutting and ignorance.

This law must succeed!

__

A few basic references for the untrained:

MIT Radiation Laboratory Series vol 23 - Microwave Receivers, Ed: S.N. Van Voorhis, 1948.

Noise Reduction Techniques in Electronic Systems, Ott, Henry. W, 1976, Wiley.

Re:Am radio law opposed by tech and auto industries is close... by walterbell on Sunday May 05, 2024 @02:03AM (#40262636)
> For those who don't understand the problem let me put it into perspective. These EMR shielding problems were solved in the 1930s when aircraft used HF radio (≈3-30MHz). Aircraft HF radio receivers have to be about an order of magnitude more sensitive than normal domestic AM radios because the incoming signals were so much weaker. That didn't deter RF engineers of the day, now all aircraft electronics are properly shielded.

Thanks for the history, precedents and references.

Re:Am radio law opposed by tech and auto industries is close... by mschuster91 on Sunday May 05, 2024 @06:19AM (#40263664)
> Under ITU and national spectrum management laws such behavior is supposed to unlawful but no one including the FCC does anything of consequence about it (once if you emitted radio noise you'd soon find radio inspectors clambering all over your equipment with RF noise detectors).

Well, back then radio inspectors didn't have to fear getting shot.

Snark aside: it's only getting worse every day. Temu, Wish, Alibaba, Amazon dropshippers - almost none of the stuff they sell has passed any kind of compliance audits, and they aren't even required if the device in question isn't intended to participate in RF communication. That is the real culprit... all these billions upon billions of small devices with high frequency voltage regulators that all act as (very) tiny RF emitters.

And even if you'd begin to teach about shielding and EM suppression in electronics design courses, it would be pretty useless against the infamous magics of "gongkai". Just look at this $12 phone [1] - no RF shielding anywhere despite the thing literally being a cellphone. And yet if I were to order one of these, even an entire batch, chances are high no one would ever stop me.

[1] https://www.bunniestudios.com/blog/the-12-gongkai-phone/

Re:Am radio law opposed by tech and auto industries is close... by geerlingguy on Sunday May 05, 2024 @10:10AM (#40265017)
Half the cheap little AC adapters and chargers spit out tons of noise interfering with multiple frequency ranges these days. It's quite annoying.
Re:Am radio law opposed by tech and auto industries is close... by hilbert42 on Sunday May 05, 2024 @11:27AM (#40265570)
Somewhere along the way EMI requirements stopped being enforced. From my observations this mostly happened in the 1980s when deregulation of the telecommunications industry happened around the world. Governments started outsourcing their Spectrum Management departments to private enterprise. These industry bodies were much less concerned with matters such as interference.
Re:Am radio law opposed by tech and auto industries is close... by hilbert42 on Sunday May 05, 2024 @11:14AM (#40265474)
"...it would be pretty useless against the infamous magics of "gongkai"

True, but as I just posted to buescher we, as a society, will have to rethink the EMI problem and this will change the whole approach to electrical engineering per se. Protecting the electromagnetic spectrum will need to be considered of paramount importance (as our communications infrastructure depends on protecting it).

Like chemical engineers, considering the effects of EMI pollution levels will have to become the first step in any electrical/electronic project.

This also means tighter regulation and possibly new laws.

Re:Am radio law opposed by tech and auto industries is close... by mschuster91 on Sunday May 05, 2024 @03:54PM (#40267668)
> Protecting the electromagnetic spectrum will need to be considered of paramount importance (as our communications infrastructure depends on protecting it).

I wouldn't be that sure.

Yes, there is a lot of garbage and congestion on the spectrum, but thanks to new approaches to (forward) error correction, higher quality RF parts and especially the explosion of compute power, we can achieve ridiculous communication quality. And it's not new either - GPS is orders of magnitude below the noise floor, and yet, we got "smart collars" for cats and even birds capable of decoding that signal.

Pretty much the only ones who actually have a problem with all the garbage are hams, and to a lesser extent air traffic control (for them, it's mostly people with garbage handheld radios, and dumb pilots not switching from ATC to onboard communications).

Re:Am radio law opposed by tech and auto industries is close... by buescher on Sunday May 05, 2024 @08:50AM (#40264482)
Well, yes, but electric motors and drive circuitry are particularly nasty emi sources. One poor-man's susceptibility test is to run a handheld drill motor as close to your circuit board as possible. In an EV, you're driving around inside one.
Re:Am radio law opposed by tech and auto industries is close... by hilbert42 on Sunday May 05, 2024 @10:40AM (#40265226)
"Well, yes, but electric motors and drive circuitry are particularly nasty emi sources."

Agreed, but that noise can be contained with an effective Faraday screening.

If noise escapes then the shielding isn't working properly.

It seems to me that electrical engineers—especially those working in high speed digital electronics—need to think like chemical engineers who spend much of their time in the containment business. Safely containing dangerous polluting liquids and gasses is a basic premise in chemistry. Most of the engineering infrastructure of large chemical plants is involved with containing chemicals and doing so in ways that are safe and do not pollute the environment.

On the other hand, electrical engineers have a dangerous waste product—EMI—that they'd rather forget about. Well, I suggest that in today's world that thinking is just not good enough.

Put another way, when building electrical/electronic systems start with the foundation which is to ask what pollution or damage will this project cause. The first question is to ask yourselves what are the shielding/EMR requirements for this project. Chemical and civil engineers start with such requirements as a matter of form and good practice. So should electrical engineers (you do this now re electrical safety, so you just have to extend that thinking to RFI).

It's now time electrical engineers started to work in the same way. RF shielding and protecting the electromagnetic spectrum should no longer be considered an inconvenience and afterthought but as a major component of the project.

BTW, by adopting good shielding practices you'll be preparing yourselves for the next Carrington Event. Remember RF shielding works both ways—in and out!

Re:Am radio law opposed by tech and auto industries is close... by chockablock on Sunday May 05, 2024 @12:26PM (#40266046)
> Agreed, but that noise can be contained with an effective Faraday screening.

I don’t think car manufacturers are saying they don’t know how to shield, they’re saying it would come at a cost:

"Requiring the installation of analog AM radios in automobiles is an unnecessary action that would impact EV range, efficiency and affordability at a critical moment of accelerating adoption," -the fine article

Re:Am radio law opposed by tech and auto industries is close... by hilbert42 on Sunday May 05, 2024 @01:28PM (#40266561)
Well, what are those costs? Perhaps they're not wanting to resign components that were badly design in the first instance. If so, then that's unacceptable. Moreover, a redesign would benefit over the long term.

I smell short-term thinking here and concern over their current problem of falling profits from EVs

Re:Am radio law opposed by tech and auto industries is close... by analog31 on Sunday May 05, 2024 @09:39AM (#40264818)
Indeed, industrial electric motors have an exemption in the FCC regulations because of this. I wouldn't be surprised that EV's are similarly exempt.
Re:Am radio law opposed by tech and auto industries is close... by chockablock on Sunday May 05, 2024 @12:19PM (#40266003)
Got a pointer (or search terms) for this? I’d like to learn more
Re:Am radio law opposed by tech and auto industries is close... by analog31 on Sunday May 05, 2024 @01:42PM (#40266653)
Sadly it's been a long time since I picked up that factoid.