It's off balance, and it shows now that the tech has to be removed since it wasn't actually at parity despite it being an argument for it unfortunately.
The worst part? This has been the case for 15 years. It's not like there wasn't enough time to fix it. That's plenty of time to hire and develop solutions, yet now look at the reasons for it being taken away.
I think a lot of the time people give an excuse, or perhaps even a justification to themselves, when they really just want the excitement of new phone. I often catch myself inventing reasons why I should replace my perfectly fine phone.
Literally many people do not care enough to understand it. It's just a modern necessity, a tool.
USB-c PD is such a dumpster fire of a standard. Even with supposedly high end cables like Anker you often can't charge a Macbook Pro faster than it can drain it's own battery under load. We can't expect normal people to understand why there are a dozen different cable types that all have the same tip but charge at vastly different rates...
Every conforming cable supports 3 amps and 20 volts.
If you think something's incorrect with that, be specific. But the spec is pretty clear.
The exact details of the faster cables are murky because there's old and new versions of that section of the spec, but very few devices use enough power to care about that.
The problem is all the non-conforming cables that people have, that look exactly the same as conforming cables.
Is the part of the GP comment I was responding to. The connectors form part of the standard. There’s no way to identify a standards-conforming cable from a non-standards-conforming cable by looking at it. They all look the same.
You plug in a USB-C cable, you might get a quick charge. You might not. Unless you have a USB-C power meter, you have no way to tell unless you know how quickly your device should charge in 5, 10 or 15 minutes, and hang around to wait and see if it does or not.
I think there’s a meaningful difference there!
Really, we're talking about physically broken cables here. As long as there's electrical connection, there's no other way for a cable to not work at 3A/60W with USB PD. Its cable requirements only start when you want to go higher than that - and 60W is plenty of power already.
If something breaks that, it doesn't make sense to blame USB. Whatever the manufacturer was doing, it was such a mess that it would fail with any other standard.
Supporting data and PD is just three tiny wires, it's not hard.
Higher power levels beyond 60W are optional. The newest PD spec goes up to 240W (5A @ 48V).
Anyway the GP post is referring to a USB A to C cable and an old-fashioned USB A wall charger, many of which barely output a single watt. My family members have had similar problems due to similar confusion.
If it doesn't have the wires inside, you've been scammed into buying a piece of junk that merely looks like a USB cable.
When using a USB-A charger, you're guaranteed* at least 2.5W, and the charging standard (BC 1.2) goes up to 7.5W (though usually you can go higher with proprietary protocols, such as QC, or even PD 1.0, although it's very rare for something to support PD 1.0 and pretty common to support QC or Apple signaling). Sure, you won't be able to charge a laptop from a USB-A port, but it's not a hard thing to grasp.
I don't think you know what you're talking about.
* You could probably find some chargers that do less than 500mA, but you'd have to search among 20 years old ones at this point and they wouldn't really work with anything modern anyway, PD or not. The hard requirement is that a port has to provide at least 100mA, but that's only relevant to data ports that can do USB enumeration - for charging-only ports, everything assumes at least 500mA, and it would be really hard to find something with less than 1A or even 1.5A (7.5W) these days. Of course, if you try hard you can find any kind of weird stuff out there - I've got a water fountain for cats with power adapter that has a USB-A port providing 9V, so connecting anything else to it may make it release its magic smoke - but that's hardly a problem with USB itself.
Having power wires isn't optional. The ohm limits aren't optional. And they can handle 20 volts by virtue of using normal insulation.
The 60 watt limit is for completely passive cables that don't implement anything PD-specific.
Buy stuff that's up to spec, and it'll be fine.
The only case where you may need a different (non-passive, "e-marked") cable is when going above 60W (3A).
For one thing, if Apple is complying with the EU’s alternative App Store and browser engine mandate, they’re even less useful than before. Why do I as a user want a PWA when I could have a native app?
On iOS you need to use the Share > Add to Home Screen which normies have no clue about. You’ll find out if the site supports PWA features AFTER you add it to your Home Screen. This of course is done entirely on purpose to make them harder to find and less appealing than the revenue generating App Store.
For me, I use iPhone entirely because pixel doesn’t support cardav and caldav out of the box…if I can’t use PWA’s on my phone then I’m going back to android cause I can solve the email problem easier than I can solve the productivity tools not being available via PWA’s.
That to me is a bit of an indicator that Apple just doesn’t believe in the merits of the technology. I think they might be asking the same question in asking: what problem is this solving?
Every platform with a web browser has a better way to run applications, which is to just run an application. A web site that is masquerading as an installed application is basically just a less capable application.
As a side note, I’m also not really sure how an app store can be considered scammier than the entire web. The web is a Wild West with far fewer “rules” than the Play Store.
We run 3 SaaS apps. One is strictly native, and the other two are strictly web. Writing for 4 platforms on the native app is an extremely expensive exercise and then we are also subject to the insanity that is the App Store. Long story here, everything from App Store review times on mission critical software to the fact that their billing mechanism simply doesn’t work for B2B SaaS…and by the way, we get zero traffic from the App Store as that’s simply not where our customers are looking for the solution we provide. Fortunately, bulk of our customers start on desktop where we self distribute (code signing on windows and notarization on mac) with ev ssl on marketing sites. Why is the App Store scammy over the open web…search for any number of popular apps and look at how many have been cloned. Sure, you can do this on the web with paid ads and enough SEO effort but it’s much harder.
To this day, Apple continue to allow keyword stuffing, advertising on trademarked names, and blatant copyright infringement in app descriptions and even I (fairly tech savvy) accidentally purchased a clone of poly bridge for my kid cause they’ll list the clone above the real one on an exact term search. What was apples response when I said I purchased the wrong app? Tough cookies!
This is the same reason I hate shopping on Amazon. I simply prefer to have a direct relationship with the companies I buy things from, and from what I can tell, our customers prefer have a direct relationship with us.
But back to why PWA’s are awesome…simply put, iteration time. We can publish dozens of improvements every day and roll back instantly when an issue arises. We simply can’t do that with native as long as the Apple / Google act as a gate keepers. When we allow proper sideloading without the scare tactics and dirty tricks, we’ll take the time to build native again.
You've described some advantages to you as a developer. For the average user, apps that change all the time and effectively make them a tester aren't such a no brainer!
Re benefit for who. We will invest our time where it makes the most sense. If you’re familiar with platform risk, you’ll understand that we’re not exactly eager for our existence to be subject to the whims of Apple and Google.
Google in theory has a financial motivation to make their competitor Apple look like the bad actor.
For one, the actual PWA packaging process gets shunted off to a Google server; I think you can make a "thin client" APK from a manifest using a tool they wrote some time ago[0] (Twitter Lite is one of these), but I've not really looked into it. It's not quite the extension to Chrome you'd really want it to be; if you use a non-Chrome browser on Android, it means you can't really ditch the Chrome dependency if you want to use a PWA. (Further not really helped by the fact that Google is basically the only PWA implementer on Android, since Firefox does not consider PWAs a priority whatsoever.) Similarly, Google's servers need to be able to read out the manifest declaration, which makes them unfeasible for intranet software unless you want to punch a temporary hole and expose it to the internet for a bit.
The other kinda annoying thing Google does is really aggressive degradation between PWA and homescreen shortcut. If the manifest isn't entirely up to snuff in terms of what's listed, there's no attempt at trying to resolve the issue, it just instantly degrades to a homescreen shortcut. A basic example of this is the requirement to use a service worker (even if the service workers entire job is to do nothing); it's not really stated in the manifest spec that it's required, but if you don't have one, the PWA straight up refuses to install as a PWA.
Google's strength with the play store really mostly comes from their bundling advantage; Play Services and the attached Store and Google Apps are required for OEMs to add to their devices (might change with the DMA?). That's the kinda odd reality that makes Apples desire for control seem so extreme - we know what an open platform looks like on Android. It works pretty well for the most part and the incumbents advantage for a store is large enough that almost every app developer submits to the Play Store regardless.
[0]: It's called Bubblewrap - https://github.com/GoogleChromeLabs/bubblewrap
Would be interesting to see how the play store changes in the event of Android honoring code signing for side loading like windows. Eg..no scare screen on side loaded apk’s as long as they’re code signed.
I suspect the App Store would live on as a consumer focused App Store and the enterprise apps would direct distribute which makes sense anyhow cause IAP does t understand account based pricing.
The only thing actually needed for feature parity with the Play Store is mostly just that F-Droid can't auto-update; the Play Store can skip the update/install prompt screen, F-Droid can't. They added install origins to APK files last year iirc, so there's a likely chance they're allowing it though.
Does it live up to that? YMMV. It's probably fine for very simple apps, probably comes apart at the seams for anything trying to look modern or have fancier functionality.
The only two things I've ever missed from native functionality are:
- background geolocation
- push notifications on ios
The second one was fixed recently.
In contrast, from what I've seen 90+ percent of apps I see in the app stores would be better as a web page / PWA.
I’d take a decent wager that most of your users are most familiar with apps and would prefer installing full apps.
Doesn’t matter that most apps would be better suited to being a web page or PWA if that’s not where the users are. That’s kind of like saying that PCs are better at gaming than consoles. Yes, that’s true, but that’s not where the majority of users are.
To use the gaming console example, it's not unlike using an emulator to launch your game on PC (if you could somehow monetize an emulated rom). It's not the ideal experience, but it requires very little extra work.
Well, they "live" on their phone. I would just put a button on my website to install the app, users would find that easily.
One of the small conveniences is indeed that you didn't need to develop the same thing twice, which made the barrier to entry much lower. The functionality that you were exposing to users did not need to pass a review at one of two US tech giant companies, which could reject publishing it for any or no sensible reason at all. You were not forced to pay 30% of your revenue to the gatekeepers of the platform. You were not banned to invite users to buy your product in any way that works for them, even if it meant sending you checks over carrier pigeons. There was no _chokepoints_ that a single company could squeeze to further its own interests (after the collapse of IE).
Google Chrome would like a word...
In some regards yes. In practical regards they're a threat to app store margins (on all app stores, not just Apple), so there's no incentive to truly support them other than developers being loud about it.
>I don’t even know where to find one.
Because Apple has crippled the ability for you to use them, so developers can't really spend time working on them. Chicken and egg problem.
>if Apple is complying
They're not really, they're twisting and turning as much as possible to look like complying but make the desired outcomes even more difficult to achieve.
If a regulator enforces a ban on dihydrogen monoxide in a misguided attempt to reduce global warming, should companies comply with the regulation or the presumed intent?
The EU is demonstrating the folly of legislation tech product design at this level of detail.
Heh! Also known as hydroxyl acid. It’s the major component of acid rain.
;)
I agree that's not as good as a native install prompt but I don't think it's a strange incantation/utterly unintuitive. I know that icon originally meant 'share' but these days it means a wider range of things - basically "take this thing somewhere else".
It’s also a very inconsistent experience: some sites have set themselves up as fully featured PWAs, others have made no efforts at all. Both get the same button.
OH (frequently):
- hey I need to to up, do you have a phone charger?
- yup, which kind?
- not "an Apple"
- oh, so USB?
- yeah the "standard" one, not the "new usb"
That said, I'm surprised many do know about the literal "usb-c" term. Micro USB A though flies over their head, it's "small usb" or "standard usb" every time.
Of note: EU here, and while they by and large don't know about the EU standardising stuff they did notice the effect. I've seen a few refer to USB-C as "universal one" (largely coz it works the same for both phones and laptops)
The more important context is the legal one, not what laypeople think.
Apple is presenting PWAs as viable alternatives to the app store in a legal context: https://www.accc.gov.au/system/files/Apple%20Pty%20Limited%2...
In a similar vein, a startup will be very happy to talk about how valuable it is, except when it comes to talking to tax authorities, whereupon suddenly their shares are borderline worthless.
In context 99% of the users I meet don't even know what USB-C is.