News for hackers. Stuff that matters.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by hooby on Friday December 01, 2023 @01:54AM (#38483953)
The thing I see not mentioned in the article/video, is how the wheels can tilt/turn/angle - without needing a CV joint again.

The designs seems to cover all the motion of the wheel in the suspension - but I don't see how this could accommodate steering.

Is this for back wheel drive only?

Curiously the animations shown in the video, show the uni wheel used in the front of a front wheel drive car - but without ever showing how the wheels steer.

How is that supposed to work?

Re:Hyundai Uni Wheel electric drive system could revolutioni... by husam212 on Friday December 01, 2023 @03:30AM (#38484497)
Maybe the motor is supposed to turn with the wheel, that doesn't sound like a good idea.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by justinclift on Friday December 01, 2023 @04:31AM (#38484884)
That'd make the motor the pivot point. No idea if that's good or bad though. :)
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @04:44AM (#38484969)
Why not?

You'd have an added complication of making the shock absorber the pivot point, and attaching the motor to the top point. Or having a separate pivot point where the motor or wheel can slide up and down.

This does raise the question of why not just attach the motor straight to the wheel.

The standard response to that is a hand wavey "unsprung mass". But has it actually been tried and shown to be an issue?

Re:Hyundai Uni Wheel electric drive system could revolutioni... by consp on Friday December 01, 2023 @08:13AM (#38486280)
> The standard response to that is a hand wavey "unsprung mass". But has it actually been tried and shown to be an issue?

Afaik with high performance motors, if you want optimal performance and space efficiency you take the unsprung mass for granted and move everything in wheel and try to reduce the mass as much as possible. As a bonus you do not need joints, just a planetary gear system.

Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:40AM (#38488754)
Why only high performance though.

A motor per wheel simplifies everything.

No diff, no CV joints, you don't need this, just a simple planetary gearbox.

You gain space, lower manufacturing costs (theoretically, assuming multiple motors doesn't offset the other cost reductions, although as you could base a 2wd and 4wd high performance version on the same motor, that's an even harder case to make).

Re:Hyundai Uni Wheel electric drive system could revolutioni... by lstodd on Friday December 01, 2023 @02:06PM (#38490807)
Everyone says "unsprung mass" but you also have to provide cooling without ingesting all the dirt and water off the road. It's not that simple.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @04:39PM (#38492833)
Brake lines are a solved problem. Water lines wouldn't be any more difficult. If air cooled it could be a sealed unit.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by tlb on Friday December 01, 2023 @08:06AM (#38486224)
Unsprung mass sucks. You don’t notice on smooth surfaces, but if you are cornering on a rough surface the wheel ends up losing contact with the ground after each bump. It’s extra-dangerous when its the rear wheels because the car can spin out.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by hwillis on Friday December 01, 2023 @12:06PM (#38489144)
It's not unsprung. The wheel and gear bit are the only unsprung parts; think of it like the motor attaching directly to the wheel bearing, and the wheel is able to move vertically on the bearing.

I think this only works with RWD, because the turning wheels can't be sprung without also having to rotate the springs.

It would be a better suspension (closer to racing suspensions) than standard, because wheels wouldnt toe in/out when they moved down/up. Looks expensive as hell though

Re:Hyundai Uni Wheel electric drive system could revolutioni... by schiffern on Friday December 01, 2023 @12:34PM (#38489501)
tlb was replying to this part:

"This does raise the question of why not just attach the motor straight to the wheel. The standard response is ...unsprung mass"

Re:Hyundai Uni Wheel electric drive system could revolutioni... by hooby on Friday December 01, 2023 @05:20AM (#38485193)
Well, if the motor is unsprung mass, you no longer need this contraption at all, and you can just directly connect the motor to the wheel...

So, that's probably not it.

Re:Hyundai Uni Wheel electric drive system could revolutioni... by dist-epoch on Friday December 01, 2023 @06:51AM (#38485757)
I'm no mechanical expert, but I wonder how you prevent damage to the motor if the wheel encounters an obstacle when it tries to rotate (against a curb for example) or if it's forced to rotate by an exterior force.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:35AM (#38488684)
Cars already have traction control, and there's probably a thermal cutout already in the motor.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by DennisP on Friday December 01, 2023 @09:30AM (#38487063)
The wheel can move up and down relative to the motor, so you can still attach a shock absorber to the wheel, without the motor being involved. The video shows this at 2:36.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:33AM (#38488656)
Yes my point is, why have the complication of this set up at all.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by DennisP on Friday December 01, 2023 @12:40PM (#38489568)
To me it doesn't seem any more complicated than a pair of CV joints.

Benefits according to the article: "reduced packaging size, improved ride quality, greater durability and, importantly, increased efficiency."

Re:Hyundai Uni Wheel electric drive system could revolutioni... by deeg on Friday December 01, 2023 @11:19AM (#38488439)
I've been under the impression that putting the motor on the wheels increases gyroscopic forces which can cause handling problems.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:32AM (#38488639)
It isn't rotational mass though, just unsprung.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by jillesvangurp on Friday December 01, 2023 @05:11AM (#38485136)
Probably a combination of having some way to rotate wheel + motor around some axis and the ability to simply vary the motor speeds on each wheel independently.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by hooby on Friday December 01, 2023 @05:25AM (#38485229)
But then you need empty space around the motor, so that it can rotate there.

That somehow seems a weird choice for a device that's all about improving space efficiency.

Re:Hyundai Uni Wheel electric drive system could revolutioni... by audunw on Friday December 01, 2023 @04:18PM (#38492576)
You can see the motors turning in some empty space in the video yes. But it’s mostly in the space that would be taken up by the CV joint.

Just look closer at the animations in the video if you want to see how the space is being used

Re:Hyundai Uni Wheel electric drive system could revolutioni... by chakintosh on Friday December 01, 2023 @05:55AM (#38485397)
In the video there was a brief animation at 5:06 showing the entire motor rotating with the wheel. So the CV joint (if you can call it that) wasn't really removed, just moved to the part between the motor and the chassis.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by 20after4 on Friday December 01, 2023 @08:35AM (#38486460)
The next logical step would be integrate the motor directly into the wheel. With 4 wheel drive motors it wouldn't require huge motors, they could each be small enough to be packed right up against the inside of the wheel.

I'm actually surprised they would even need the gearbox. Why not just put four Outrunner[1] motors, one on each wheel, and let the wiring be the only thing that has to flex when the wheel is steered.

1. https://en.wikipedia.org/wiki/Outrunner

Re:Hyundai Uni Wheel electric drive system could revolutioni... by pxndxx on Friday December 01, 2023 @10:24AM (#38487780)
Hub motors make wheels quite heavy, which means that there's more unsprung mass [1] in the vehicle, making it less responsive under acceleration/braking and more noisy and sensitive to vibrations.

They're common in electric scooters, bikes and bicycles though.

[1] https://en.wikipedia.org/wiki/Unsprung_mass

Re:Hyundai Uni Wheel electric drive system could revolutioni... by reactordev on Friday December 01, 2023 @12:18PM (#38489299)
newer designs are silent, weigh about 2lbs or a little under a kilo, can produce upwards of 100nm torque at 1000w.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by pornel on Friday December 01, 2023 @06:40PM (#38494136)
1kW isn't going to suffice. Car motors are >100kW.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by reactordev on Friday December 01, 2023 @06:57PM (#38494269)
Well, that’s overkill for Hyundais, 20-50kW max is all you need per wheel. You can produce >100kW with some high end racing hub motors [1]. You can also scale it up to generate more torque. Gear it down, etc.

[1] https://www.koenigsegg.com/quark-emotor

Re:Hyundai Uni Wheel electric drive system could revolutioni... by reactordev on Friday December 01, 2023 @12:14PM (#38489250)
I thought the same thing and was disappointed to see a planetary gear setup to turn an outer ring gear. Shame, we have come so far in EV motor design and yet Hyundai seems stuck on drivetrain power design.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by metabagel on Friday December 01, 2023 @12:18PM (#38489297)
My experience with a planetary gear in a bicycle is that it produces additional noise. I wonder if this would be noticeable for an automobile.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by reactordev on Friday December 01, 2023 @12:46PM (#38489670)
I'm sure it would. Any mechanical gears will produce noise at higher velocities so curious what this sounds like myself. Electric hub motors produce a wine from the EMF that is audible but that's a different sound (the hum of a tesla going by) or a Surron that uses a radial flux motor with chain link gears (this is my favorite hobby design, chain gears are super useful).
Re:Hyundai Uni Wheel electric drive system could revolutioni... by tempmac on Thursday December 07, 2023 @02:28PM (#38560694)
> Electric hub motors produce a wine from the EMF

the sound is not coming from EMF, but rather from speakers due to safety regulations for pedestrians

Re:Hyundai Uni Wheel electric drive system could revolutioni... by emilecantin on Friday December 01, 2023 @08:54AM (#38486653)
It's been invented in Québec in the 90s[1] by our national utility company, they had demo cars and everything. Then it was all swept under the rug after some secret deals with car manufacturers...

1. https://fr.wikipedia.org/wiki/Moteur-roue_d'Hydro-Qu%C3%A9be... (in French only, sorry!)

Re:Hyundai Uni Wheel electric drive system could revolutioni... by geoduck14 on Friday December 01, 2023 @08:48AM (#38486602)
I agree, hub motors [0] have been around for over a decade and are used to power EVs in races. I don't really know why these aren't being considered here.

[0]https://www.explainthatstuff.com/hubmotors.html

Re:Hyundai Uni Wheel electric drive system could revolutioni... by pbronez on Friday December 01, 2023 @12:17PM (#38489284)
Aptera is using in-wheel motors for their upcoming autocycle https://www.electrive.com/2022/06/23/aptera-orders-in-wheel-...
Re:Hyundai Uni Wheel electric drive system could revolutioni... by idiotsecant on Friday December 01, 2023 @08:46AM (#38486580)
Hub motors have existed for a long time. The issues you'll have to overcome are the same.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by atomicUpdate on Friday December 01, 2023 @02:30PM (#38491091)
> The designs seems to cover all the motion of the wheel in the suspension - but I don't see how this could accommodate steering.

It actually doesn't. A wheel's camber changes as it moves up and down, which is why race cars typically have negative camber when going straight, so the tire's entire contact patch is used when going around a turn, which compresses the suspension of the outside wheel.

This design doesn't appear to handle this case at all. I'm not sure how a traditional suspension setup could be modified only move a wheel up and down, without any change in the camber, considering the fixed attach points of the various control arms.