News for hackers. Stuff that matters.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @04:44AM (#38484969)
Why not?

You'd have an added complication of making the shock absorber the pivot point, and attaching the motor to the top point. Or having a separate pivot point where the motor or wheel can slide up and down.

This does raise the question of why not just attach the motor straight to the wheel.

The standard response to that is a hand wavey "unsprung mass". But has it actually been tried and shown to be an issue?

Re:Hyundai Uni Wheel electric drive system could revolutioni... by consp on Friday December 01, 2023 @08:13AM (#38486280)
> The standard response to that is a hand wavey "unsprung mass". But has it actually been tried and shown to be an issue?

Afaik with high performance motors, if you want optimal performance and space efficiency you take the unsprung mass for granted and move everything in wheel and try to reduce the mass as much as possible. As a bonus you do not need joints, just a planetary gear system.

Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:40AM (#38488754)
Why only high performance though.

A motor per wheel simplifies everything.

No diff, no CV joints, you don't need this, just a simple planetary gearbox.

You gain space, lower manufacturing costs (theoretically, assuming multiple motors doesn't offset the other cost reductions, although as you could base a 2wd and 4wd high performance version on the same motor, that's an even harder case to make).

Re:Hyundai Uni Wheel electric drive system could revolutioni... by lstodd on Friday December 01, 2023 @02:06PM (#38490807)
Everyone says "unsprung mass" but you also have to provide cooling without ingesting all the dirt and water off the road. It's not that simple.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @04:39PM (#38492833)
Brake lines are a solved problem. Water lines wouldn't be any more difficult. If air cooled it could be a sealed unit.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by tlb on Friday December 01, 2023 @08:06AM (#38486224)
Unsprung mass sucks. You don’t notice on smooth surfaces, but if you are cornering on a rough surface the wheel ends up losing contact with the ground after each bump. It’s extra-dangerous when its the rear wheels because the car can spin out.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by hwillis on Friday December 01, 2023 @12:06PM (#38489144)
It's not unsprung. The wheel and gear bit are the only unsprung parts; think of it like the motor attaching directly to the wheel bearing, and the wheel is able to move vertically on the bearing.

I think this only works with RWD, because the turning wheels can't be sprung without also having to rotate the springs.

It would be a better suspension (closer to racing suspensions) than standard, because wheels wouldnt toe in/out when they moved down/up. Looks expensive as hell though

Re:Hyundai Uni Wheel electric drive system could revolutioni... by schiffern on Friday December 01, 2023 @12:34PM (#38489501)
tlb was replying to this part:

"This does raise the question of why not just attach the motor straight to the wheel. The standard response is ...unsprung mass"

Re:Hyundai Uni Wheel electric drive system could revolutioni... by hooby on Friday December 01, 2023 @05:20AM (#38485193)
Well, if the motor is unsprung mass, you no longer need this contraption at all, and you can just directly connect the motor to the wheel...

So, that's probably not it.

Re:Hyundai Uni Wheel electric drive system could revolutioni... by dist-epoch on Friday December 01, 2023 @06:51AM (#38485757)
I'm no mechanical expert, but I wonder how you prevent damage to the motor if the wheel encounters an obstacle when it tries to rotate (against a curb for example) or if it's forced to rotate by an exterior force.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:35AM (#38488684)
Cars already have traction control, and there's probably a thermal cutout already in the motor.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by DennisP on Friday December 01, 2023 @09:30AM (#38487063)
The wheel can move up and down relative to the motor, so you can still attach a shock absorber to the wheel, without the motor being involved. The video shows this at 2:36.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:33AM (#38488656)
Yes my point is, why have the complication of this set up at all.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by DennisP on Friday December 01, 2023 @12:40PM (#38489568)
To me it doesn't seem any more complicated than a pair of CV joints.

Benefits according to the article: "reduced packaging size, improved ride quality, greater durability and, importantly, increased efficiency."

Re:Hyundai Uni Wheel electric drive system could revolutioni... by deeg on Friday December 01, 2023 @11:19AM (#38488439)
I've been under the impression that putting the motor on the wheels increases gyroscopic forces which can cause handling problems.
Re:Hyundai Uni Wheel electric drive system could revolutioni... by benj111 on Friday December 01, 2023 @11:32AM (#38488639)
It isn't rotational mass though, just unsprung.