The LHC had a data rate of over 40TB/s and even after the low-level triggers of over 100GB/s back in 2016[2]. Again they're forced to throw away most of it due to lack of storage.
This means someone looking for a novel signal can't just scan through the archives. I'm sure science instrument groups like the ones mentioned would have loved to be able to store more data.
[1]: https://iopscience.iop.org/article/10.3847/1538-4357/aad188
[2]: https://www.annualreviews.org/doi/full/10.1146/annurev-nucl-...
These kind of storage are indexed, one can jump directly to relevant sections and access the data.
Large storage density usually helps in efficiency of mounting & dismounting of media.
You still need to live with the slow write times, though. What's the point of even building a single unit of tape storage if it will take you a minimum of 30 years to write your data to it? Why not just make 1 million smaller ones?
CeraTape is further into the future compared to CeraMemory, so it’s completely understandable that they wouldn’t be ready to talk about the read/write performance of CeraTape yet.
However, it is fun to imagine an audit logging server that is able to operate for 30 years continuously without having to swap the storage. Just write, write, write. The odds of an audit log ever needing to be read are usually quite low, but if it is ever called upon, you’d be able to quickly jump to the point in time of interest and recover the relevant audit logs from potentially decades of logs.
OK, so I should assume the max of "GB/s speeds"? 999GB/sec would still take 11-12 days!
---
Even if we do limit to 1GB/sec, that's a lot of data to be logging, even if it's raw video. It would be neat to have that as a sort of infinite throwaway chache, though, but I can't imagine really using more than a petabyte or two.
However, I will emphasize again that CeraTape is further in the future, so it makes sense that Cerabyte would not be ready to discuss performance figures for that. What you’re continuously quoting is certainly referring to CeraMemory, the stuff they’re planning to release sooner in smaller capacities.
10PB at 10GB/s would be about 12 days. Even if it were 5GB/s, it would still be less than a month. A major trade off, to be sure, but I can definitely imagine applications where that would be acceptable if the cost were low and the durability were high.
The real question is whether they can deliver what they’re promising at a reasonable price.
> Data reading can be done with equipment using high-resolution microscopic imaging techniques or electron beam microscopy
2nd being NAND quality varies a lot and are not battle tested as long term storage solution. Would I still need to have ZFS Storage for my SSD just in case? If so why not use HDD instead?
May be NAND will get there. But judging from the industry roadmap I have seen it wont happen for another 5 - 6 years.
If they are inexpensive, and durable to be considered archival quality, it will find its place.. somewhere between NVME drives and the magnetic tapes.
But what about the other 9 Exabytes? Yeah, it will still take another 114.5 days to even touch that; and that's assuming "GB/s class speeds" means 100GB/s, and not less.
You may as well just get 10 100PB disks. There is no point getting extra storage that you will never have time to write to.
The extraordinary claim here is that the technology can scale by 10x over 5 years, and then also be applied to tape, all while being much cheaper. And you know what they say about extraordinary claims…
https://www.tomshardware.com/news/pcie-70-to-reach-512-gbs-a...
> Cerabyte says its technology can read and write data at GB/s class speeds.
1EB = 1,000 PB = 1,000,000 TB = 1,000,000,000 GB
To read the 10PB cartridge at:
1GB/sec = 115.740.. days
10GB/sec = 277.7.. hours
100GB/sec = 27.7.. hours
To read the 1EB tape at:
1GB/sec = 31.7 years
10GB/sec = 3.17 years
100GB/sec = 115.7 days
1TB/sec = 11.57 days
10TB/sec = 1.2 days