News for hackers. Stuff that matters.
Re:Introducing Flow from Mixpanel by JangoSteve on Thursday March 22, 2012 @01:42PM (#3740969)
I like the simplicity of the UI overall, but I'm always surprised when people go through the trouble to make certain interactions really fancy when the less fancy version would be both better for the user and easier to implement.

In this case, the little popover when I hover over a circle. As I move my mouse around the circle, the popover follows along on the perimeter of the circle, and I must hover over the (hopefully) tiny red piece to get the dropoff stats.

Given the small amount of data being shown in the popover, why not show me the stats for "continued" + "dropoff" in the same popover and just place it to the right of the circle? No fanciness needed, and it'd be more usable.

Re:Introducing Flow from Mixpanel by moe on Thursday March 22, 2012 @03:15PM (#3741427)
As I move my mouse around the circle, the popover follows along on the perimeter of the circle

Seconded, this is a terrible design. Scrap the popovers and just display those 4 figures right inside the circle. Save the eye-candy for where it doesn't get in the way.

Re:Introducing Flow from Mixpanel by SpiderX on Thursday March 22, 2012 @06:52PM (#3742475)
Exactly. I shouldn't have to hover my mouse over everything to see all the data. Also those tick marks on the outer edge of the circle signify nothing. I thought perhaps the '6' visitors would be signified by 6 ticks... nope. And why does the dropoffs have to fade out? That just is confusing. It would be nice if the dots on the flowchart arrows were proportionally sized to the traffic flow.

It's like "mystery meat navigation" of statistics. If I care about statistics, I'm probably comfortable looking at a page full of numbers. Give them to me, don't make me hover everything.

Re:Introducing Flow from Mixpanel by degenerate on Thursday March 22, 2012 @01:57PM (#3741066)
I very much agree. Also, please add IP blocking, for testing purposes.
Re:Introducing Flow from Mixpanel by michaelkscott on Friday March 23, 2012 @12:34AM (#3743714)
This is exactly what I was thinking when I was looking at it. I'd prefer even a plain/text version of the data, so I can interpret it the way I like.
Re:Introducing Flow from Mixpanel by krelian on Thursday March 22, 2012 @02:55PM (#3741347)
I think that lately there has been too much emphasis on "beautiful". Don't get me wrong, I love beautiful, I'm just tired of reading variations on sentences with the word beautiful in them as a marketing shtick.
Re:Introducing Flow from Mixpanel by masukomi on Thursday March 22, 2012 @03:03PM (#3741383)
Why is this free?

Is this a loss-leader to get people to sign up for the full Mixpanel service?

These days I just don't trust free services. I don't think there's anything nefarious about them, I just don't trust that they're going to be around in a year (why keep running a service that has costs but no revenue), or that they won't get bought for their talent and promptly shut down.

If it uses resources to any significant degree (a JS on every page load can definitely do that when used at scale) there should either be a fee or a damn good reason why I should put my faith in it, especially if you're asking me to base business decisions / process on it.

Re:Introducing Flow from Mixpanel by martian on Thursday March 22, 2012 @03:12PM (#3741416)
This is free because to install it, you must put a link on your page back to MixPanel. MixPanel likes links because Google likes links: it increases the domain authority and PageRank for MixPanel. You'll notice that alt text in the link back to www.pixpanel.com is "Real Time Web Analytics", surely a set of keywords that MixPanel is aiming to own in search.

This is a very clever and subtle SEO move that provides real benefit to users at the same time.

Re:Introducing Flow from Mixpanel by notknifescience on Thursday March 22, 2012 @03:19PM (#3741444)
Adding the badge to your site is not at all required to use Flow. We would like it if you did, so we will give you 4x the page views if you do, but it's not necessary at all.
Re:Introducing Flow from Mixpanel by avree on Thursday March 22, 2012 @04:38PM (#3741869)
I don't think you need to be worried about it being free. It's not actually free for everyone, I'd assume.

The fact that they let you put a badge on your page to get "4x more views" makes me believe they're going to price it similarly to how Mixpanel is priced—it's free up to a certain number of interactions, and then has tiered pricing from that point on.

Re:Introducing Flow from Mixpanel by physcab on Thursday March 22, 2012 @02:26PM (#3741205)
This is neat looking, but I'm not sure how actionable it is. Of course there is going to be a drop-off of users as they drill down. That happens in almost every funnel situation. Also, this doesn't seem to account for other factors that may be to blame. What happens if you stop your marketing? What if you pushed a new version the night before?

What is most illuminating for a chart like this is seeing these numbers as a total % of activations/daily users/daily visitors over time. That way, you can see if a particular change you made (such as doing some landing page optimization) actually increased conversions which is ultimately what you're trying to look at in something like this.

Re:Introducing Flow from Mixpanel by JangoSteve on Thursday March 22, 2012 @02:43PM (#3741294)
The Google Analytics version of this feature does let you do this. In case my other comment mentioning it gets buried, it's called Visitor Flow: http://support.google.com/analytics/bin/answer.py?hl=en&....

In the Google Analytics version, you can view and interact with the flow graph based on different segments, including "Visits with conversions", "Visits with transactions", and a bunch of other metrics.

Re:Introducing Flow from Mixpanel by shimon on Thursday March 22, 2012 @03:16PM (#3741431)
I'm a paying customer of Mixpanel. I like Flow. My biggest request is the same as the biggest request for the rest of Mixpanel: remove the wall between page views and other events. A flow of pages is nice but a flow of events might really teach me something new about my users.
Re:Introducing Flow from Mixpanel by immad on Thursday March 22, 2012 @01:45PM (#3740984)
This is the coolest thing I have seen in Analytics for a long time. This really gets to the heart of most of the information you need on user flows and its fast and clear.

Can't wait till they add events to this.

Re:Introducing Flow from Mixpanel by JangoSteve on Thursday March 22, 2012 @02:19PM (#3741166)
Not sure how many are unaware, but Google Analytics has had this same feature for at least a few months (I think) with a different, slightly more fancy, UI. From the new Analytics dashboard, if you go to Standard Reporting => Audience => Visitors Flow, you'll see it.

http://support.google.com/analytics/bin/answer.py?hl=en&...

Re:Introducing Flow from Mixpanel by creamyhorror on Friday March 23, 2012 @12:29AM (#3743701)
I've been using GA's visitor flow for a few months and I still think its presentation is really neat. It only shows the first 3 pages viewed, at least on my free account.

I suspect many people still don't know about it, since it wasn't featured upfront like Mixpanel is featuring Flow here. One of those low-profile upgrades that is really quite useful but left unmarketed.

edit: Another thing is that GA's flow presents the actual size of flows visually, whereas Mixpanel's doesn't - the sizes of the circles are based on step number, and you have to mouseover the small points to see the traffic flow percentages. I have to say Google's is superior, at this point.

Re:Introducing Flow from Mixpanel by breck on Thursday March 22, 2012 @02:30PM (#3741229)
neat, thanks!
Re:Introducing Flow from Mixpanel by breck on Thursday March 22, 2012 @01:56PM (#3741060)
Agreed. This looks extremely well made. I'm looking forward to this afternoon when I actually have some data in there.
Re:Introducing Flow from Mixpanel by marknutter on Thursday March 22, 2012 @02:57PM (#3741359)
Does this work for single-page javascript applications using html5 pushStates or hash-bang URLs?
Re:Introducing Flow from Mixpanel by ladon86 on Thursday March 22, 2012 @04:14PM (#3741699)
It does. Using the new Mixpanel JS library you would call:

mixpanel.track_pageview(window.location.href);

Re:Introducing Flow from Mixpanel by kijin on Thursday March 22, 2012 @01:53PM (#3741048)
> Follow your users every step of the way

Cyberstalking at its finest!

As analytics tools get more and more sophisticated, one question keeps bugging me. Are companies lying when they say in their privacy policy that they will not share user data with anyone except when compelled to do so by law, and then paste a couple of lines of third-party analytics code in their footers?

It's not uncommon for Ghostery to alert me about 5-10 third-party tracking tools on a single page. Some companies mention analytics explicitly in their privacy policy. But many websites don't. Privacy paranoia aside, I'm curious about the legal aspect of using analytics tools, and whether Mixpanel makes any effort to help its customers comply with relevant regulations (if necessary).

Re:Introducing Flow from Mixpanel by ROFISH on Thursday March 22, 2012 @04:18PM (#3741731)
Flow looks nice but it doesn't show what I want out of analytics, which is link sources and conversions. What I would like to see is flows like:

CPC ad click -> Product Page (secondary goal: email signup) -> Cart -> (time passes) -> Googled "product" -> Product Page -> (time passes) -> email click -> Product Page -> Cart Page -> Payment (primary goal)

I want to see is where people come from, where they went, and why it works. In the example above, the thing that worked was email reminder. It gets even worse when referers are involved, and blog posts don't remove the utm_campaign=email link.

Basically, I'd like a backwards flow from individual conversions.

Re:Introducing Flow from Mixpanel by faborio on Sunday April 01, 2012 @09:00AM (#3783549)
You should try foretaster, it's very close to what you've just described - http://www.foretaster.com
Re:Introducing Flow from Mixpanel by ryanglasgow on Thursday March 22, 2012 @02:19PM (#3741170)
Overall the visual design is nice but this doesn't seem very practical.

Issues:

1) Requires too much effort (rolling over hover states) to dig out information.

2) Pairing circles and rectangles as a node make it hard to parse when your eyes are scanning the page. These shapes don't naturally go together.

3) URL's are truncated too short. On the bottom left of the live demo, you see "/account/listi..." twice, and they're actually different URL's. For some websites I can see this becoming a major issue.

4) The rounded circular graphs with the blue and red look nice, but doesn't convey the information very well. Any type of circular chart (pie chart, tachometer graphs, etc.) is not recommended.

Suggestions: I would consolidate the information for each node and show all of the visible and rollover data into a single box. Use varying font sizes, colors, and weights for necessary emphasis. Instead of the circular graphs, use a horizontal bullet graph[1] along the top of each node. Use the bullet graph to display the historical high and low as the bar, and the daily range as the background (or vice versa). This way, the user can scan the page looking at the bullet graphs along the top, and then if something strikes there eye as unusual look below and examine the data.

http://en.wikipedia.org/wiki/Bullet_graph

Re:Introducing Flow from Mixpanel by evlapix on Thursday March 22, 2012 @02:31PM (#3741235)
Awesome. I've been wanting to see this in analytics for a long time. Not because I would use it, but because I thought it made the most sense. I came across this article on HN a while back that seems to hint at the same thing: http://www.contrast.ie/blog/the-future-of-analytics-products...

I believed it was such a necessity that I worked on building a MVP for about a year, but then gave it up a few months ago. The project was way outside my technical ability even after all that I learned and I had absolutely no experience with analytics in general. It was a bad decision to work on it for any period of time, let alone a year. Especially since I had other ideas that I was better suited to build and believed more in.

Now all that's left of the project is a demo video I put together for a job application. This isn't really what I had in mind then, but what the hell...

Show HN: Real-time, visual, click-path, analytics (pathtrends.com) http://vimeo.com/27327367

Re:Introducing Flow from Mixpanel by jazzychad on Thursday March 22, 2012 @02:23PM (#3741190)
Feature request: Please let me have multiple simultaneous URL Groups (or if this is already possible, I can't figure out how to do it). It also wasn't very clear that the URL Groups aren't stored, so I have to re-enter them each time depending on what data I'm viewing? Or am I mixed up there, too?
Re:Introducing Flow from Mixpanel by tsunamifury on Thursday March 22, 2012 @01:50PM (#3741023)
Well this sure looks really cool, but it strikes me as really over designed. Getting at information requires a large number of clicks and hovers over very specific areas.

It is also hard to get a sense of any 'big picture' data. Datapoints are trapped in hover interactions and you have a limited view of your site due to the canvas.

While line graphs are bar charts aren't very cool looking, they provide an enormous amount of visual economy. I care more about the speed of which I can consume big picture and detailed information than my ability to visualize my site map.

Re:Introducing Flow from Mixpanel by hedgehog on Thursday March 22, 2012 @03:01PM (#3741379)
This is beautiful. It would be nice to be able to collapse pages together or somehow view cycles. On sites where users tend to have long sessions the graph of site traversal has cycles which may themselves be as interesting as how users exit a given page. For example if you have a group of desirable actions (say you have a site with shopping and user-user messaging) and you want to roll up the exits (collapse the above pages together and find out how much in users are falling out of those pages into help).
Re:Introducing Flow from Mixpanel by raylu on Thursday March 22, 2012 @03:23PM (#3741459)
Allowing cycles in your graph is confusing. If a user visits pages A -> B -> C -> A, what is the dropoff between A and B?
Re:Introducing Flow from Mixpanel by rubynerd on Thursday March 22, 2012 @05:33PM (#3742129)
It looks pretty, the example looks pretty slick, but, it's not all that easy to use in a hurry, and I'm not even sure history exists

It shows a very good 'State of the Machine' at the current moment in time, but it does feel slightly like candy

One major, major thing I would add to convert this into something I would use for my 'strtup' is time, and the ability to see what happened at a time, or event

I am basing this on the 'live demo', but it seems like a report on what's happening now, which isn't really that useful in the grand scheme of things. For instance, if I drop a new feature or blog post on HN, I want to see what effect that will have on my application, and what users do and where they go after first opening that email or clicking on that link

This may seem insane, but I promise I am going somewhere. In my GCSE Physics exam, we were given energy diagrams, and told to do things with them like fill in the blanks. On the left, there was a kind of 'origin', which represented the energy given out by an object. So say a lightbulb gives out 80% light, and 20% heat energy, that would be represented by a 10cm wide arrow on the left hand side, which then breaks into a 8cm wide arrow pointing right, and a 2cm wide arrow breaking off from the main chunk and pointing downwards, to represent waste energy.

This loops back into analysis, say when Flow was first posted onto HN. You could break that down into signups, showing where people dropped off, what pages they viewed and where they went from there, and then render that in a pretty diagram, hopefully showing you where the friction points are

I do also have two minor issues I picked up on from Flow, and I suppose Mixpanel

Given it's a free product, which may or may not have the aim of pushing users into Mixpanl, I could not find any obvious links to https://mixpanel.com on the main page. Which was kind of sad, I wanted to read more about Mixpanel and what the bread-making product does, and how it sustains this free app

Secondly, I emailed Mixpanel back in January asking about details for an internship. Since then, I have received a grand total of nothing from them. Which is sad, metrics and user statistics are two things I thoroughly enjoy, and I would love to work with Mixpanel to build things like this

Re:Introducing Flow from Mixpanel by creamyhorror on Friday March 23, 2012 @12:33AM (#3743711)
Your idea is pretty much exactly what Google Analytics' Visitor Flow does, complete with 'waste' flow dropping off downwards:

http://support.google.com/analytics/bin/answer.py?hl=en&...

Good that you had the idea, though :) Maybe you can apply it profitably in some other domain.

Re:Introducing Flow from Mixpanel by hopeless on Thursday March 22, 2012 @01:54PM (#3741050)
I found the UI very pretty (I had to check it wasn't Flash) but a bit confusing and limited:

- Only shows 3 flow destinations at a time (and I nearly missed the scroll buttons)

- Had to mouseover to get percentages. I don't know why why percentages seem more useful to me than actual numbers

- It didn't feel very "actionable". I can't put my finger on why, but I wasn't sure what I'd do with this diagram.

Re:Introducing Flow from Mixpanel by trefn on Thursday March 22, 2012 @01:59PM (#3741075)
You can click through on any node to drill down - that might not be as clear as it could be.
Re:Introducing Flow from Mixpanel by guiseppecalzone on Thursday March 22, 2012 @02:21PM (#3741176)
It's really difficult to get a good sense of how a user moves throughout your site. So, I think this could be amazing.

As a next step, they should allow you to click on one of the nodes and turn that page into a cohort. Then, we could analyze the impact of our improvements. That'd be sick.

Re:Introducing Flow from Mixpanel by mistircek on Thursday March 22, 2012 @01:24PM (#3740848)
Is this a part of complete Mixpanel service or is it something separate?
Re:Introducing Flow from Mixpanel by suhail on Thursday March 22, 2012 @01:24PM (#3740849)
It's separate and free, however the JavaScript you paste is the same for regular Mixpanel and Flow. So if you already are using Mixpanel then you can just login.
Re:Introducing Flow from Mixpanel by kstenerud on Thursday March 22, 2012 @08:25PM (#3742830)
Very difficult to use on iPad. You end up drilling down when you try to touch the circle for the pop-up. It's also hard to hit the red part of the circle.
Re:Introducing Flow from Mixpanel by Tim-Boss on Thursday March 22, 2012 @01:48PM (#3741009)
How long is this going to be free for? Hate to convert a some websites to it, only to have to move on again in a few months!
Re:Introducing Flow from Mixpanel by trefn on Thursday March 22, 2012 @01:49PM (#3741018)
It will be free forever, and integration is almost zero effort - just paste a snippet of code.
Re:Introducing Flow from Mixpanel by ryanbales on Thursday March 22, 2012 @02:28PM (#3741215)
Awesome UI - Nicely done. Fancy UX always has its limitations but also serve as exploration into future trends, etc.
Re:Introducing Flow from Mixpanel by edwinyzh on Thursday March 22, 2012 @02:19PM (#3741168)
This is very intuitive! Graphical representations are always better than data in such use cases, IMHO.
Re:Introducing Flow from Mixpanel by reustle on Thursday March 22, 2012 @03:22PM (#3741455)
Interesting, they just mask listia.com's data for their example.
Re:Introducing Flow from Mixpanel by coderholic on Thursday March 22, 2012 @02:06PM (#3741109)
It'd be great to be able to segment logged in/out users.