News for hackers. Stuff that matters.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by VincentEvans on Thursday November 24, 2022 @12:59PM (#33734271)
What are those for? My laptop has internet, but I don’t need to plug it anywhere for it to work. Is this for computers like they had in the really old movies like Back to the Future?
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by newaccount74 on Thursday November 24, 2022 @01:19PM (#33734557)
Ethernet has more bandwidth and lower ping than Wifi. And is mostly immune to interference. If you have a lot of devices on Wifi, it helps to put your main devices on Ethernet.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by pletnes on Thursday November 24, 2022 @01:30PM (#33734677)
Often true, but since many a corporation now prioritizes wifi or stops deploying ethernet to avoid the cost, AND wifi keeps getting better, the lines have crossed for me. Oh and I need a USB-C to ethernet dongle. Oh, and a cable. TL;DR for me, wifi now beats ethernet at work.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by brian-armstrong on Thursday November 24, 2022 @01:39PM (#33734784)
Your company comes to your home to deploy internet for you? Fancy!
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by celtain on Thursday November 24, 2022 @03:14PM (#33735717)
Thanks to USB-C I just keep my Ethernet cable plugged into my monitor (via a USB dongle), and now when I plug in my external display I not only get power but also wired networking.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by krolden on Thursday November 24, 2022 @07:54PM (#33737870)
I was going to do the same but the USB ports on my monitor go down to usb 2 when youre also doing video. I was disappointed when I found that out.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by AdamTReineke on Thursday November 24, 2022 @01:07PM (#33734411)
I'm convinced that a wired connection is better for video calls. Just like headphones. I'm my opinion, those two things are table stakes for a good remote work experience for your coworkers.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by Mogzol on Thursday November 24, 2022 @01:46PM (#33734879)
I was convinced of that until I was forced to stop using a wired connection (moved to a room that didn't have ethernet). I'm on wifi now and notice literally no difference compared to when I was on ethernet. As long as you've got a decent router/AP modern wifi is really not bad. I get a consistent 400-500 Mb/s up and down with no hiccups. On my wifi 6 devices I get closer to a Gb/s.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by ornornor on Thursday November 24, 2022 @03:39PM (#33735970)
It’s not only throughput. Wifi is more susceptible to jitter as well. But yeah in some cases wifi works well, whereas wired always works well. And if wired doesn’t work then your internet connection is bad and wifi won’t help either.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by bombcar on Thursday November 24, 2022 @01:49PM (#33734921)
Yep my wired is 10Gb and it is better than wireless.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by funhatch on Thursday November 24, 2022 @01:20PM (#33734563)
What’s a laptop, grandad? I can code on my tablet /s
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by dmd on Thursday November 24, 2022 @01:30PM (#33734679)
I learned recently that most high school students around here (fairly affluent Boston suburb) write papers - even long 10+ page ones - on their phones.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by lostlogin on Friday November 25, 2022 @12:54AM (#33739674)
This is terrible.

Using the phone keyboard?

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by dmd on Friday November 25, 2022 @07:58AM (#33741961)
yep
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by munk-a on Thursday November 24, 2022 @01:33PM (#33734713)
What's a tablet grandpa? I code in Roblox /s
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by Firmwarrior on Thursday November 24, 2022 @02:03PM (#33735056)
Cables are so that you don't lag in the middle of an important boss encounter at work or play when someone turns on the microwave
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by bornfreddy on Thursday November 24, 2022 @02:47PM (#33735456)
Off topic, but if your microwave does that, it is time to either fix or retire it.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by ornornor on Thursday November 24, 2022 @03:41PM (#33735993)
Why? Do you mean because it leaks microwaves? I believe that’s an urban legend as you’d notice very quickly.

Microwaves always kill wifi for me if they’re in the path between device and AP.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by bagels on Thursday November 24, 2022 @04:37PM (#33736511)
What's an urban legend? That your kitchen microwave doesn't leak? I'd be surprised if any of them somehow didn't. It takes a tremendous effort to stop all rf leaks in a device.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by lostlogin on Friday November 25, 2022 @12:54AM (#33739670)
Having been around a few MR scanners with RF artifact issues, I agree.

Light bulbs with tiny bits of filament in the bulb, holes drilled in the cage by fire safety morons, faulty doors etc.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by myself248 on Thursday November 24, 2022 @04:43PM (#33736567)
This happened to a coworker of mine. He was having sporadic wifi trouble, always in the evening but not every evening. Plugging in wired would always solve it, so it was definitely a wireless problem.

I handed him one of my old Ubiquiti M-series APs, the ones with the spectrum analyzer function built in. Showed him how to use it on his laptop, how to turn in a circle and estimate the azimuth of the source, etc. He went home that evening and as soon as his connection dropped, he fired up the analyzer. Very quickly localized the source to the driveway side of the house.... to the neighbor's kitchen.

At that point he called me for advice, and I said to knock on the neighbor's door, because this is really unsafe. He put me on speakerphone and I was able to tell them what we found, and they cut me off, saying they knew the door seal was damaged -- it got torn a few weeks prior when someone caught something in the door -- they just had no idea it was a big deal. (It's normal to feel a warm draft near the corner of the unit since the fan exhaust blows out down there, so the warm-sunshine feeling wasn't distinct enough to alarm anyone.)

They replaced the microwave the next day and the problem went away.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by dekhn on Thursday November 24, 2022 @06:04PM (#33737218)
No, it means you should move out of 2.4GHz for wifi.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by EvanAnderson on Thursday November 24, 2022 @07:33PM (#33737744)
Years ago I had a Customer who complained that the Wi-Fi in their conference room “always” failed during a midday meeting. The conference room was right across from a break room w/ a microwave. Sure enough, employees heating food correlated with the outages.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by lm28469 on Thursday November 24, 2022 @02:36PM (#33735356)
Not all networks are wireless enabled
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by russdill on Thursday November 24, 2022 @03:14PM (#33735712)
There's a large number of reasons, reliability, bandwidth, latency, security, but really with the rise of thunderbolt and USB c docks there's no longer a need to plug a laptop directly into Ethernet.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by comboy on Thursday November 24, 2022 @03:23PM (#33735801)
Guys, VincentEvans has almost 10 years old account, I doubt he needs these explanations. I've never seen such joke being misinterpreted on HN. Heartwarming patience for youngsters though.
Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by TacticalCoder on Thursday November 24, 2022 @04:32PM (#33736484)
> but really with the rise of thunderbolt and USB c docks there's no longer a need to plug a laptop directly into Ethernet.

Especially when the laptop does not have an Ethernet port. For me it's USB-C to Ethernet adapter when my laptop is in my office room, and pathetic WiFi elsewhere.

I take it I should try one of these USB-C to USB-C magnetic things (a la Magsafe): don't know if they're any good.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by mig39 on Thursday November 24, 2022 @03:38PM (#33735960)
This is the best troll comment ever :-) Look at the replies taking you seriously :-) Including me.

When you have a lot of wireless devices, for every one you take off wireless, you have less radio traffic, less interference, and everyone else has a better connection :-)

In my network, unless something has to be wireless, I run a cable :-)

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by Smoosh on Thursday November 24, 2022 @05:20PM (#33736884)
Same with me re wired whenever possible.

Especially for things like streaming boxes which want a good connection and use high bandwidth.

I save the wifi for things that really need it, and they should be faster as a result.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by consumer451 on Friday November 25, 2022 @01:18AM (#33739800)
> In my network, unless something has to be wireless, I run a cable :-)

Also, if possible, run it inside conduit. Some more cost now, but conduit makes it a much more maintainable system. Solid digital infrastructure, for the home or small office.

I once did this for a small office space which I had the freedom and budget to do as I wished. After that, everything was rock solid for years. Floods, critters, insane humidity... survived it all. If somehow a cable went bad, it could be used to pull through its replacement. In 10-20 years if fiber became the new LAN cable, then just pull it through yourself without an electrician. If you need to hire an electrician, their billable hours will be much lower.

Rigid conduit every room, maybe even two walls per room since you are under there already.

If it's a retrofit then maybe it's too late, but a renovation or new build... I would always spend that extra money if at all possible.

Re:A 3D-printed ethernet RJ45 clip to secure/repair/fix brok... by rkagerer on Thursday November 24, 2022 @10:33PM (#33738891)
Yeah, think of the wire like a safety line to keep your packets from wandering off and getting lost on their way to the cloud. It can help reduce the "401 not found" pages you sometimes encounter.

Is this for computers like they had in the really old movies like Back to the Future?

Yep, exactly that. They used the 1.21 Gigawatts standard, which was only half as groovy as today's 2.4 Ghz WiFi.