News for hackers. Stuff that matters.
Re:YouTube removes criticism of dangerous fractal wood burni... by fendy3002 on Friday July 01, 2022 @08:54AM (#31945716)
Such as a gun is always loaded, my take is electricity is always dangerous.

Even professionals can get into accidents, moreover us uneducated plebs.

Re:YouTube removes criticism of dangerous fractal wood burni... by jimnotgym on Friday July 01, 2022 @09:53AM (#31946401)
Every electrician I have met, has had some kind of shock in their career. Mostly it is a small induced current issue, which can easily kill you if it knocks you off a ladder....
Re:YouTube removes criticism of dangerous fractal wood burni... by fendy3002 on Friday July 01, 2022 @10:08AM (#31946607)
No matter how many times I see someone changing computer parts while the power is still connected, if I'm doing it I always unplug the power then pressing the power button to ensure it's unpowered
Re:YouTube removes criticism of dangerous fractal wood burni... by aaronmdjones on Friday July 01, 2022 @10:19AM (#31946746)
You won't get hurt working on a live computer unless your power supply is dangerously engineered (stick to well known named brands) or wide open (don't open it up unless it's been unplugged and sitting on a shelf for months) for the same reasons pointed out elsewhere in these comments; the voltage simply isn't high enough. It won't even induce a perceptible amount of current (unless you do something stupid like stick your tongue on it), much less a harmful amount.

You'd be surprised at all the stuff you can get away with on a live computer. For example, did you know that AHCI (SATA) and PCIe (and thus NVMe) are both hot-pluggable and hot-swappable? ... and that you can hotswap RAM (with a cooperating motherboard and OS) and even CPUs (on multi-socket boards)?

Re:YouTube removes criticism of dangerous fractal wood burni... by fendy3002 on Friday July 01, 2022 @10:42AM (#31947046)
Hdd or ssd are hot swappable? thats cool, thanks for sharing.

as for ram I have tried it once and it freeze the pc, I forgot if I have another plugged in or not though.

Re:YouTube removes criticism of dangerous fractal wood burni... by SV_BubbleTime on Friday July 01, 2022 @11:04AM (#31947363)
Sata is hotswappable. IDE was not. And I believe m.2 would be if the connector was designed a little different, because that’s all u.2 is. Compact Flash Express is, but again, that’s NVMe and splitting hairs between u.2.

Typically on hot swappable devices it’s been common to make the ground pins a little longer than the rest, ensuring that those will make contact first. The issue with hot swappable devices aside from a sharp initial draw is “grounding” the circuit to an IO pin before real ground is made. Most default low potential IO pins won’t enjoy taking the full load of the device while the ground plane is missing connection.

Oddly to me, many new PC BIOS ship with SATA hot swapping disabled. IDK why. You can plug the drive in it’ll spin up, but no data transfer will happen until you reboot. Safe, just ineffective. I recently had to learn this the hard way.

Re:YouTube removes criticism of dangerous fractal wood burni... by Nextgrid on Friday July 01, 2022 @04:14PM (#31952166)
> no data transfer will happen until you reboot

I think this is something the OS can override. If I remember correctly I could discover a hotplugged SATA device in Windows by using "Scan for new hardware" in the Device Manager.

Re:YouTube removes criticism of dangerous fractal wood burni... by aaronmdjones on Saturday July 02, 2022 @01:56AM (#31956632)
More specifically, the system's firmware AHCI hotplugging configuration only applies to the system firmware.

That is to say, if hotplugging is disabled on your SATA controller, then the firmware won't see a new SATA drive if you plug it in while the machine is running. So, for example, you won't get a UEFI boot menu entry for it if you go to the boot override section that presents all of your storage devices.

Once the operating system takes over, that's all a moot point. Whether hot-plugging was disabled in your firmware settings or not, if the OS supports it, it will work. Both Microsoft's AHCI driver (msahci.sys) and the Linux "ahci" kernel module (or built-in) support hot-plugging.

On my Windows desktop with an Intel SATA chipset, hot-plugging a drive did cause Windows to briefly drop all other drives on that controller before re-enumerating all of them, which lead to a BSoD because one of those drives was the drive with Windows itself on it. However, this was solved by installing Intel's chipset-specific driver (Intel Rapid Storage Technology, iaStorV.sys) and tweaking the registry to have that one start at early boot instead of msahci.

Re:YouTube removes criticism of dangerous fractal wood burni... by rocqua on Friday July 01, 2022 @10:29AM (#31946881)
The idea is also that pressing the power button will also help discharge some capacitors as the power-supply tries to supply power. Not sure to which degree this works to make things safer, but trying it won't hurt.

(Note this will _not_ make a powersupply safe to open up)

Re:YouTube removes criticism of dangerous fractal wood burni... by SV_BubbleTime on Friday July 01, 2022 @11:08AM (#31947427)
Unlikely to have effect on a PC.

On a dumb device where the power button is part of the actual circuit, let’s say an old radio this will work.

On a PC, the power button isn’t hooked to anything but the chipset or some micro or an upstream circuit that tries to start a micro. Which means to have any effect, that processor needs to be executing code, or needs to have enough power to start the chipset itself. Both of these are unlikely to have any effect on CPU capacitors or caps in the power supply.

I’m fairly certain this is placebo at best on a modern PC.

Re:YouTube removes criticism of dangerous fractal wood burni... by hedora on Friday July 01, 2022 @11:33AM (#31947870)
It definitely kicks the power light on for a bit under a second on my 2010 era desktop. The (high end, low wattage) power supply is delivering enough voltage to keep the motherboard power controller up.

I have no idea if it discharges all the different voltage rails. I don't like having the fans try to spin up while I'm mucking about, and it stops that from happening.

Of course, from an equipment damage perspective, grounding yourself to the case ground is much more important than discharing the PSU capacitors.

I usually physically unplug the computer, push the power button, then open / touch the case (I'm in a humid climate).

I've never had an issue (ignorging fires, but those happened when the computers were intentionally energized).

Re:YouTube removes criticism of dangerous fractal wood burni... by Dylan16807 on Friday July 01, 2022 @10:28AM (#31946868)
While that's a good idea because of potential part damage, I don't think that 5/12 volt supply counts as dangerous in any meaningful way.
Re:YouTube removes criticism of dangerous fractal wood burni... by itsyaboi on Friday July 01, 2022 @10:30AM (#31946889)
You need about 24 volts to overcome the skins resistance. Most PCs use some combination of 3, 5, and 12 volt rails so you should be fine, as long as you avoid licking anything.

Edit: Some PSUs have -12 +12 rails, I suppose if you were really unlucky and grabbed both at once the 24v differential could give you a zap.

Re:YouTube removes criticism of dangerous fractal wood burni... by AlexandrB on Friday July 01, 2022 @11:22AM (#31947678)
The -12v rails are typically low current though. The real danger is a poorly built supply or an electrolytic capacitor exploding in your face (had this happen once).

Incidentally, does anyone know what the -12v rails are used for? Some kind of reference?

Re:YouTube removes criticism of dangerous fractal wood burni... by Gibbon1 on Saturday July 02, 2022 @01:36AM (#31956555)
RS-232 drivers like the old MC1488 were run off plus and minus 12 volt supplies. DRAMS like the MK4116 also required a low current -5V bias supply. And there were other chips that possibly needed a -5V supply. Since the -5V was low current you could generate it off the -12V with a simple linear regulator.
Re:YouTube removes criticism of dangerous fractal wood burni... by aaronmdjones on Saturday July 02, 2022 @12:59AM (#31956400)
If memory serves, the -12V rail is useful for onboard audio op-amps.
Re:YouTube removes criticism of dangerous fractal wood burni... by SV_BubbleTime on Friday July 01, 2022 @11:11AM (#31947493)
Typical recommendation for DRY skin is ~50V.

You can wet your fingers and get way lower, but I’ve never had anything much at 24V even when trying. At that low a voltage it may come down to frequency of the source.

Obviously your tongue gets way lower, as is 9V lickers know already.

Re:YouTube removes criticism of dangerous fractal wood burni... by itsyaboi on Sunday July 10, 2022 @11:30AM (#32045641)
Licking 9V batteries should be a rite of passage for EE majors. That and playing capacitor hot potato.
Re:YouTube removes criticism of dangerous fractal wood burni... by ChrisMarshallNY on Friday July 01, 2022 @09:51AM (#31946352)
I remember watching some electricians rewiring some stuff at my old workplace. We were moving into a new office, and had to have some light switches changed for the new zone.

The electrician popped open the switch plates, yanked out the old switches, clipped the wires, stripped the wires, wired up the new switches, and screwed everything back together.

It was all live (like 300 volt live), as the lights turned on (queue spark), as he wired the new switches. He was not wearing gloves. It was all barehanded.

It was quick, though. Took, like, a minute.

Re:YouTube removes criticism of dangerous fractal wood burni... by mikestew on Friday July 01, 2022 @10:17AM (#31946716)
It obviously can be done, and I've heard folks more experienced than I say "all ya gotta do...", and I'll admit that I might have even wired a switch/outlet myself without flipping the breaker. And a pro could probably get away with it for a long time.

But it just sounds like something that is one distraction away from a bad day.

Re:YouTube removes criticism of dangerous fractal wood burni... by aaronmdjones on Friday July 01, 2022 @10:30AM (#31946896)
In the UK, as far as the Health & Safety Executive goes, who are the people who will be hauling you up in court if your screwups cause injury or death, they go to great lengths to discourage working live if at all possible.

That said, it is sometimes necessary. I've replaced a circuit protective device in a live electrical panel in a commercial setting before. As you point out, avoiding distraction is a very important factor. That means no chit-chat, no-one overlooking and critiquing what you're doing, noise to a minimum, all of the tools you'll need prepared up-front, etc.

Re:YouTube removes criticism of dangerous fractal wood burni... by foobarian on Friday July 01, 2022 @10:22AM (#31946792)
Meh, for 120V or 220V worst can happen is you get a little shock or trip the breakers. I don't bother shutting off power to household circuits either.

I heard from HV vets that one acquires a habit of keeping one hand in the back pocket when working on substations, industrial installations, and such. :-)

Not sure where there would be 300V for light switches/fixtures though. Some bespoke factory setup?

Re:YouTube removes criticism of dangerous fractal wood burni... by ChrisMarshallNY on Friday July 01, 2022 @10:26AM (#31946839)
The lights were using some higher voltage. The Operations Manager mentioned it to me, while the work was being done. Apparently, it's standard. Something like 320 volts (don't remember the exact number). I had not heard of it, beforehand.
Re:YouTube removes criticism of dangerous fractal wood burni... by aaronmdjones on Friday July 01, 2022 @10:50AM (#31947170)
230V AC is the RMS (root mean square) voltage; if you rectify it to DC, it comes out to 325V. Put another way, the /highest/ absolute potential difference between line and neutral in a 230VAC system is 325V.