Unless you are concerned with getting the closest shave possible, electric seems the obvious choice.
There are some really fantastic electric razors that are cheap and get close enough that it makes no visual difference, except they don't cut the hairs under the skin so I haven't had an ingrown hair in years and years.
Blades cost $0.25 each and I use about 10 a year.
Much better than $15/mo I was spending for cartridge razors. I’ll never go back.
But I've also had it several years and the technology I'm sure constantly improves.
The post doesn’t even mention straight razors [1].
Also, I’m not sure electric razors are the less wasteful solution. Any electric appliance is likely to be much more environmentally costly to manufacture than a simple gadget. It certainly can’t compare with safety razors (or double-edged razors, as called in the article).
I won’t comment on the convenience of electric razors. My very limited experience with them (and not only mine) is that they don’t work on all beards, or if you don’t shave every day.
I've been using a safety razor for years and figured I was getting a pretty good deal out of it. Then a few months ago I reached into my travel bag without looking and sliced my finger open badly; the resulting stitches and tetanus shot came out to about $200, probably wiping out whatever money I'd saved by using them.
I still think it's a good deal.. if you're careful.
I also switched away from a DE when I shave in the shower. I'm too afraid of dropping a heavier handle with a sharp blade attached.
I still much prefer DE/safety over cartridge.
I'm not sure how I'll pack my razor next time (the time I cut myself was the last time I traveled) but I'll have to change how I do things going forward. Maybe I'll put the whole thing into one of those plastic clamshell soap containers, although that would be a bit bulky.
One subtle problem I've noticed with shaving in the shower is whisker splinters. Twice (both times during the pandemic, after not shaving for two or three weeks) I've gotten a whisker embedded into the bottom of my foot and didn't figure out what the strange pain was until a few hours later when it worked itself in deep enough that I couldn't ignore it anymore. I think this only happens if I've let my hair grow too long, so now I avoid this.
https://getrockwell.com/products/rockwell-genuine-leather-sh...
Both Philips, only got rid of the first one as it got broken by being knocked off a high shelf.
The idea of shaving being expensive, just seems ... odd.
So the idea that "shaving is getting expensive" strikes me as silly; I'm sure you could spend thousands if you wanted to, but that's a choice.
[1] I tried a Braun "wet or dry" shaver, but one drop in the shower was the end of that "upscale purchase".
I switched to electric years ago and will never go back.
You don't actually need shaving cream to shave with a non-electric razor. You could just use soap -- which is hopefully available wherever you travel.
You also don't need electricity.
The only thing that works well are multi blade cartridges or two passes with a double edged razor (never tried a straight razor).
Technique will eliminate ingrown hairs/cuts etc,
The exfoliation provided by using a razor (disposable, safety, or straight) is something some people find desirable (see also microblading) YMMV
Time and effort is more interesting to me. For me the time spent shaving (and on other parts of self care) is part of the value of shaving in the first place. This isn't a process that I choose to speed up
As for travelling, I use a soap puck rather than shaving foam or cream, so TSA doesn't care about that, blades are more of a crap shoot.
[1] https://leafshave.com — I use one of these for armpits and back hair, and then a traditional style merker for face
> (expense, waste, time/effort, mess, cuts/removing skin, ingrown hairs).
Eh, shaving isn't that hard. I know we've gotten lazy but holy crap. A DE shave never results in any of that for me. Shower, lather, apply, shave. 5 minutes.
https://www.youtube.com/watch?v=AdyU9qItBMA
It could be done faster too, because he does a lot of stuff that is unnecessary.
I have a DE razor and am using it for the weekend or other special occasions only because the fast way is too fast for my skin and beard (beard is like steel...). I need it properly prepared and that takes more time than I want to spend in the morning on normal days. I use an electric one than.
And I mean, why not? I quite enjoy to take some time if I don't have to wake up early for it. I listen to my audiobook and do it properly.
You can also use it to give yourself a buzz cut, if you're so inclined, and save even more money.
But the marginal gain in closeness I get from a wet shave versus the method mentioned above, when paired with cost, razor burn / irritation / breakouts, and cuts, doesn't seem worth it to me.
I use a straight razor now. The initial cost was high and there's a learning curve, but comfort is great ongoing costs are minimal: shaving soap (much cheaper than anything that comes in a can, even for premium options) and cubic boron nitride paste for my strop (this is not conventional).
I shave my head as well as my face, and I’ve only gone through two razors in 15 years. I’m only a couple years into using the second one.
The first one I actually broke down, cleaned, and partially repaired several times. I replaced wiring that had corroded and had to replace small parts. I suppose I might be on my third by now if I couldn’t repair stuff.
They do the job quickly and make it so a regular razor is easier to use if you want that close of a shave. I rarely care that much because the electric gets almost indiscernibly close by my standards
Now I recently purchased a very expensive version (comparatively) and it does the same job.
I've tried using electric, even expensive ones few times in my life but had always ended up with skin irritation starting to develop. No soup for me ;(
This blog post is about industry shoving wasteful and overpriced new trends down our throats, not about the best way to shave.
Actually these came with a trimmer on each side of the foil which you need when taking down a full bush, but I remove these and just use the foil.
It takes a lot of passes but I have plenty of time while traveling.
Brush & blow it out completely every time.
I tried reversing the procedure and shaving before I left for work, but the cast-iron skillet proved about as useful as tits on a bull while commuting.
Fortunately, the lady who gave me the shaver and the skillet decided not to use them while commuting herself, so here I am the lucky one.
I get that they have some downsides, but if we’re talking about the expense/waste of straight razors, then it would make sense to consider electric razors.
I’ve seen so many ads about companies trying to “invent” the most effective, lowest cost straight razor and it still confuses me, given we already have electric razors that will last literally years before needing to be replaced.
I’ve been using my current electric razor for probably close to 10 years, and while the blades could probably use to be replaced (still on the original), they get the job done about 98%, which is completely fine given the expense, waste, and mess of straight razors.
Edit: the article itself doesn’t even mention electric razors (as a solution to the expense/waste of straight razors), almost as if they don’t even exist. And before I posted this (after 3 hours of comments), maybe only one or two other buried comments referenced electric razors. So genuinely curious why so many don’t even give them a second thought?