News for hackers. Stuff that matters.

Ask HN: Favorite Thing Built to Last?

What is your favorite thing that was built to last? This is, perhaps, a cheesy country song that speaks to the idea https://youtu.be/E4i2fC1U38s . Is "built to last" an obsolete notion? As for me, I still have my father's old original Vise Grip https://livinghistoryfarm.org/farminginthe40s/machines_12.html .
( 109 comments | 61 points | on HN )
Re:Ask HN: Favorite Thing Built to Last? by hkhanna on Friday December 10, 2021 @11:05AM (#29511473)
This might not be what you had in mind, but the web framework Django. It's been around for ages and doesn't change in dramatic ways. It's not perfect by any means, but it just works and is reasonably easy to understand and extend if you spend the time to read through its code.

The documentation is good, but I find that it's a little overrated. There are lots of gaps, so spending the time reading through Django's code will pay dividends, especially when it comes to customizing it for your needs.

After years of churning through all sorts of Javascript frameworks, I know that I can build something in Django and only need to spend real maintenance time once every 2 years or so during an LTS release.

Re:Ask HN: Favorite Thing Built to Last? by xtracto on Friday December 10, 2021 @11:25AM (#29511734)
I'll then go with C . For a language designed more than 50 years ago, it has withstood the test of time pretty impressively.

It's a breath of fresh air to write software in C to do some low level device development for someone who spends his life in high level web frameworks.

Re:Ask HN: Favorite Thing Built to Last? by skydhash on Friday December 10, 2021 @12:44PM (#29512951)
I have a game I built for a homework in university. After 5 years of react, I picked it up and try to run it on my MacBook. I just had to edit a few files and got it working again. C has this expressiveness in it where everything is exposed to the reader. No complicated abstractions, just data structures and code.
Re:Ask HN: Favorite Thing Built to Last? by cipher_system on Friday December 10, 2021 @11:47AM (#29512007)
I'll then go with SQL. It's been around forever and evolves slowly and stably.

You (almost) never need any frameworks, imports, boilerplate or glue, everything that works just works.

And according to Star Trek Discovery, it will still be around in 250 years. Sadly though, SQL injections will still be a thing. https://www.youtube.com/watch?v=A7B_ZWQFsYI

Re:Ask HN: Favorite Thing Built to Last? by danesparza on Friday December 10, 2021 @11:40AM (#29511909)
I love that you named a coding framework. I was not in this mindset when answering the question.
Re:Ask HN: Favorite Thing Built to Last? by coldpie on Friday December 10, 2021 @10:57AM (#29511378)
I do hand-tool woodworking. My favorite tool is my Stanley No 8, which I bought locally. It was manufactured around 1900, making it (probably) older than any living human, and is still being put to work.

http://smokingonabike.com/images/woodworking/game_cabinet/bl...

More about old Stanley planes here: http://www.supertool.com/StanleyBG/stan1.htm

Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @11:13AM (#29511560)
Good planes and chisels are heirlooms if treated well.

Beautiful too. One woodworker I know has a 'slick', a 4" wide so clean you can use it as a stand-in mirror and so sharp that if you're not careful handling it you'll hurt yourself and not even realize it until you see a lot of claret on the shop floor.

He helped me with the windmill blades and trimmed down the back edges with that thing until you could read the newspaper through them (later reinforced with fiber so the wood really served just to determine the outline and any thickness would increase both noise and decrease efficiency).

Amazing tool (and amazing guy).

Re:Ask HN: Favorite Thing Built to Last? by prova_modena on Friday December 10, 2021 @11:04AM (#29511454)
I'm also a fan of hand planes. It's worth noting that Lie-Nielsen Toolworks currently makes very, very nice updates of these old designs with blades made of modern tool steel. Arguably they are the best bench planes ever made, even though old Stanley planes are superb. Here's Lie Nielsen's version of the No. 8.[0]

[0] https://www.lie-nielsen.com/products/no-8-jointer-plane?path...

Re:Ask HN: Favorite Thing Built to Last? by woolcap on Friday December 10, 2021 @01:13PM (#29513366)
I've rescued a few Stanley planes from the rust pile. Bringing them back to life and use is a joy. 100+ years old, and with cleanup and honing, can still take wispy-thin shavings, leaving a glassy-smooth surface on wood.
Re:Ask HN: Favorite Thing Built to Last? by jacobmartin on Friday December 10, 2021 @11:21AM (#29511691)
I have a Stanley 4 1/2 which I've dated to c. the 1890s and several wooden planes which are even older! I cherish them (and my other hand tools).

In a similar vein, no rasp or file will outlast its user just by its nature; nevertheless, Auriou rasps are some of the finest tools I've had the pleasure of owning and run circles around mass-manufactured ones.

Re:Ask HN: Favorite Thing Built to Last? by LeonidasXIV on Friday December 10, 2021 @11:13AM (#29511566)
It is hard to say what my favourite is, but the notion appeals to me immensely. There is a dedicated subreddit for that, /r/BuyItForLife.

I own a 1967 BelOMO-produced (Soviet union, now Belarus) Helios 44 lens. It is quite small compared to modern lenses but made entirely out of metal and glass and is the thing that I would guess will outlive me. These lenses have gotten popular in the recent years because of it's "character" (optically they're quite terrible).

Peugeot Paris pepper grinder. I've seen them used in restaurants, I doubt I'll be able to make a dent in the durability of the burrs with my home use. It looks quite retro and doesn't really fit my aesthetic but it feels so damn nice to use that other pepper grinders feel like toys.

Re:Ask HN: Favorite Thing Built to Last? by don-code on Friday December 10, 2021 @11:02AM (#29511428)
Older Craftsman tools.

I naively bought some of my own Craftsman tools at Sears back in the 2000s - many of which are cheaply made with plastic bodies, or non-durable bits. Basically every Torx screwdriver I bought there is now stripped. The cases are plastic, and use friction to keep tools in place - not that they stay in place anymore.

Contrast that with the '60s or '70s tools with the lifetime warranties (that I inherited from my grandfather, by way of my father having his own set already), which show age only in the "vintage" look. They're just as functional as I assume they were on day one. Everything's made of either steel, lacquered wood, or in rare cases, heavy-feeling plastic.

Re:Ask HN: Favorite Thing Built to Last? by netizen-936824 on Friday December 10, 2021 @05:46PM (#29516407)
Snap-On has had similar high quality and great lifetime warranties

Can't speak to what they're currently doing though

Re:Ask HN: Favorite Thing Built to Last? by buro9 on Friday December 10, 2021 @11:53AM (#29512104)
A pair of Tannoy speakers: https://www.tannoy.com/product.html?modelCode=P0DEL

Originally produced in 1978, they still sound phenomenal. The link above is to the re-issue which is highly faithful to the original.

At a time when it feels like home audio is regressing (wireless streaming speakers coupling a specific protocol for streaming with the amp and speaker, which is building in obsolescence into the hardware), and aesthetics have meant we've moved from larger drivers to multiple smaller drivers (to recreate bass you need to push a lot of air, and a larger drive does this better but few people want large speakers in their room and modern floorstanding speakers will instead try to push the same volume of air using multiple smaller drivers).

The fact that today they still sound better than most modern speakers is testament to their design and build, and what happens when you just keep something single purposed and put the function at the top of the priorities.

I recently looked at replacing my stereo, but instead only replaced the amp to benefit from the streaming capabilities. The speakers remain timeless and will probably be the only pair of speakers I need for the rest of my life (my hearing will have gone before the speakers have any issues).

My feeling is that some things have been perfected: Speakers, the bicycle, telescopes, etc. And that fashion is the risk here, a perfected item only sells to a single buyer once... and so fashion is introduced to drive new sales, and we instead stray from perfection to dance around it as if it's unobtainable.

Re:Ask HN: Favorite Thing Built to Last? by cameron_b on Friday December 10, 2021 @12:37PM (#29512822)
I think a major part of "Built to last" is repair-ability.

If you can fix it, you've kept it from the trash. That's one thing I learned a lot about as an AV service tech -- some companies are happy to sell parts or service a 10 year old unit ( a third party market for OEM parts is almost better). Some won't pick up the phone and expect a thing to be thrown away.

Tannoy speaker cabinets can be rebuilt, rattling bits cleaned up and replaced as needed, and if some punk moshes through your speaker cone, you can make him buy a new cone and learn to fix what he broke.

https://reconingspeakers.com/brand/tannoy/

Re:Ask HN: Favorite Thing Built to Last? by buggeryorkshire on Friday December 10, 2021 @11:08AM (#29511510)
Weber grills, Global kitchen knives.

Doc Marten boots used to be the same and a pair lasted me through 8 Glastonbury Festival years. They then went cheap, moved offshore and were crap. Luckily Solovair took up the old tooling iirc and are just like old DMs. https://en.m.wikipedia.org/wiki/Solovair

Re:Ask HN: Favorite Thing Built to Last? by wrboyce on Friday December 10, 2021 @11:25AM (#29511736)
Thanks for the Solovair mention, the Mrs is currently going through the process of buying Docs (online, so stacks of boots in the hall) and I think I've convinced her to give them a go. I do enjoy a well-made boot.
Re:Ask HN: Favorite Thing Built to Last? by buggeryorkshire on Friday December 10, 2021 @01:39PM (#29513723)
No problem. The original DMs I had for Glastonbury were amazing, only ditched them when cleaning looked so horrific I gave up.

The replacements didn't even last a single festival.

You can occasionally find Solovair cheaper at TK Maxx or on Hotukdeals, if it helps.

Re:Ask HN: Favorite Thing Built to Last? by arendtio on Friday December 10, 2021 @11:40AM (#29511914)
I really wish there were consumer electronics that are built to last. I know, with such a rapid pace of development nobody cares, but if find it disgusting and unnecessary.

In June, my Samsung Galaxy S3 will have served me 10 years. I think that would be okay as a default age for smartphones. Instead, nearly every consumer electronic with a battery becomes useless after 24-36 months. Sure, after 10 years the smartphone doesn't run the latest mobile games anymore, but most apps like chat, browser, Spotify, etc. still work. In fact, the biggest issue are software updates (security).

However, there are also hardware factors that have made it possible to use the phone for so long:

1. wireless charging (the micro USB port is flaky since 6 years or so)

2. sd card slot for extendable memory

3. easy to change battery

The only thing that will become a problem and that was hard to anticipate 10 years ago, will be the RAM. With just 1GB it inherently limits the parallel use of apps. However, after 10 years that is fine, but other things, like software updates, are unnecessary limiting factors IMHO.

Re:Ask HN: Favorite Thing Built to Last? by HeyLaughingBoy on Friday December 10, 2021 @11:59AM (#29512182)
I don't remember how long I had my S3 mini, but it's one of only three phones I've owned in the last 10 years. I had to give up the S3 because the micro USB jack broke as yours did and the traces were so small that my repair attempts didn't last long.

Since then I had a Microsoft phone for about 5 years. It still works fine, but AT&T warned me that it wouldn't be supported after the end of the year, so now I have an Samsung A12 that barring falls onto my tile floor, I'll probably have for another 5 years at least.

Re:Ask HN: Favorite Thing Built to Last? by david927 on Friday December 10, 2021 @11:08AM (#29511502)
An Italian friend gave me his very old Bialetti moka pot coffee maker. It has a patina from use but is otherwise in perfect shape. The thing won't make a bad cup of coffee and it won't die.
Re:Ask HN: Favorite Thing Built to Last? by davidw on Friday December 10, 2021 @11:12AM (#29511547)
Mr Bialetti actually had his ashes interred in one of his moka pots.

https://www.cnn.com/2016/02/18/europe/italy-bialetti-moka-ur...

Re:Ask HN: Favorite Thing Built to Last? by sandermvanvliet on Friday December 10, 2021 @11:23AM (#29511705)
These things are built to last indeed. It’s the no 1 item I pack when I go camping
Re:Ask HN: Favorite Thing Built to Last? by bjowen on Saturday December 11, 2021 @06:32AM (#29520137)
My parents have a cast aluminium one - it’s cracked and older than me but still makes an excellent cup. The only thing that will retire it will be induction cooking!
Re:Ask HN: Favorite Thing Built to Last? by mindcrime on Friday December 10, 2021 @10:28AM (#29510998)
The Snap-On F50CSA driver handle. It's a 3/8" drive driver handle with the socket cap in the head so it can be used as an extension. I bought one off the Snap-On truck back in like 1994 or so and it's been my favorite hand tool ever since. Sadly they don't make this model anymore, so if I ever lose mine then I'm stuffed. Well, maybe you could find a used one on Ebay or whatever, but it would probably cost out the yazoo.

https://thumbs.worthpoint.com/zoom/images1/1/0311/29/snap-f5...

Re:Ask HN: Favorite Thing Built to Last? by kingcharles on Friday December 10, 2021 @12:38PM (#29512836)
The problem with buying used is that Snap-On will no longer fix shit without the original receipt.

I had tens of thousands of dollars of Snap-On tools I bought used over the years, but Snap-On wouldn't touch any of it.

I love my Snap-On tools, and I would buy new when I needed to, but their policy on used equipment left a nasty taste in my mouth.

Re:Ask HN: Favorite Thing Built to Last? by speedcoder on Friday December 10, 2021 @10:46AM (#29511230)
Link didn't work for me. Showed "403 forbidden."
Re:Ask HN: Favorite Thing Built to Last? by dgfitz on Friday December 10, 2021 @11:04AM (#29511456)
Re:Ask HN: Favorite Thing Built to Last? by mindcrime on Friday December 10, 2021 @11:07AM (#29511490)
Aargh. Guess they don't allow deep linking to their images on that domain. It was the only pic I could find at first blush. I guess I had it cached in my browser from having visited the landing page earlier. Sorry. :-(
Re:Ask HN: Favorite Thing Built to Last? by sam_lowry_ on Friday December 10, 2021 @11:12AM (#29511555)
My 30+ years old Sony Walkman Sports still works and looks perfect. Is is amazing since there are resin pads and the the belt in it that I never cared to change.

Kids played with it for a while until they grew up. I think I will pass it to the next generation like a Rolex.

Re:Ask HN: Favorite Thing Built to Last? by EdwardCoffin on Friday December 10, 2021 @10:52AM (#29511303)
My HP-11c, one of the Hewlett-Packard calculators, which I have used regularly since 1986

[1] https://www.hpmuseum.org/hp11c.htm

Re:Ask HN: Favorite Thing Built to Last? by jrumbut on Friday December 10, 2021 @11:26AM (#29511749)
My mother had one of those, I also once borrowed my father's HP graphing calculator for a math test and quickly became unpopular because it beeped every time you hit the wrong key.
Re:Ask HN: Favorite Thing Built to Last? by TheRealSteel on Friday December 10, 2021 @11:01AM (#29511425)
My 2005 Prius had one major fault from when I got it in 2012 until this year. It goes to show that sometimes adding complexity can increase reliability. Amazing car.
Re:Ask HN: Favorite Thing Built to Last? by mitchbob on Friday December 10, 2021 @10:03PM (#29518015)
Agree. My 2003 Prius was my favorite car ever. Fantastic mileage, and it just worked. If only I'd had a cage around the (very expensive!) catalytic converter, I might still have it.
Re:Ask HN: Favorite Thing Built to Last? by derbOac on Friday December 10, 2021 @11:59AM (#29512191)
I felt the same about our 2007 Prius. It never really had any serious problems until we replaced it this year. We ran into one issue this year but it was a known thing that was fairly straightforward to replace, and although not cheap, not that expensive.

My wife wanted to replace it with a newer model because she wanted bluetooth. But I miss my old car -- it was amazingly reliable.

Re:Ask HN: Favorite Thing Built to Last? by yumraj on Friday December 10, 2021 @01:23PM (#29513507)
I had a 2004 and I fully agree. Unfortunately had to get rid of it at around 250K miles after some bastards stole the catalytic converter.
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @10:56AM (#29511360)
Gibson Les Paul. They even give you a lifetime warranty

if taken good care, the instrument will outlive you

the best old ones you can find still look like brandnew

edit: if you consider buying, i'd definitely recommend getting a used one

Re:Ask HN: Favorite Thing Built to Last? by emptybottle on Friday December 10, 2021 @11:34AM (#29511845)
They are beautiful guitars, but I'd argue that the set neck design along with the headstock shape that is prone to snapping off if the guitar tips over isn't great for longevity.
Re:Ask HN: Favorite Thing Built to Last? by appsecnewb on Friday December 10, 2021 @12:47PM (#29512998)
Absolutely love my Les Paul Standard 60's. Sure its not as ergonomic as a Strat and can be a little uncomfortable to play for long periods of time, but there's nothing that sounds like it. I question the people who complain about the headstock design. Yes, its prone to breaking. But this is a $2500+ guitar, what are you doing that makes it so easy to break? I handle my Les Paul as if it were a baby and it's life depended on me.
Re:Ask HN: Favorite Thing Built to Last? by mgamache on Friday December 10, 2021 @11:02AM (#29511434)
Mostly good, but Jesús that neck is just waiting to be broken. A Strat is much more robust design.
Re:Ask HN: Favorite Thing Built to Last? by emptybottle on Friday December 10, 2021 @11:25AM (#29511730)
I think this could be generalized to say that bolt-on necks are more robust than set necks in terms of maintenance over time.

I do tend to agree with that, because over time the tension from the strings will pull up on a neck and make the guitar sound and play poorly. To fix that you have to take the neck off and adjust the angle of it back to the optimal position, which is a big task if the neck is glued on. With a bolt-on unscrewing a few bolts and adding a shim is trivial, using a capo you don't even need to take of the strings.

It's a main reason why I like Taylor acoustic guitars too. The bolt-on shimmed neck makes neck resets a breeze and will keep the guitar playing well for a very long time.

Re:Ask HN: Favorite Thing Built to Last? by omarhaneef on Friday December 10, 2021 @11:05AM (#29511476)
This is our emacs vs vim
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:21AM (#29511678)
except with guitars you can have both!
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:06AM (#29511487)
you have to be more careful, it's an instrument

i have mine insured on lemonade.com

design-wise there's also PRS, which gives you a little of both

Re:Ask HN: Favorite Thing Built to Last? by mgamache on Friday December 10, 2021 @12:48PM (#29513013)
PRS is a modern version. The string angles and neck are not from the 1950s. Les Pauls are made for wound G strings, those haven't been in regular use in 50 years. Watch this from Get Back... This happens when you play in a band:

https://www.youtube.com/watch?v=4FMxlRNrEVo

Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @11:14AM (#29511582)
Wait until you discover violins or flutes...
Re:Ask HN: Favorite Thing Built to Last? by kgwxd on Friday December 10, 2021 @10:57AM (#29511375)
I've always loved the look of them but sitting with one is so uncomfortable for me.
Re:Ask HN: Favorite Thing Built to Last? by ninkendo on Friday December 10, 2021 @11:28AM (#29511772)
I'm not sure if it's the same in the reliability department, but in 2015 they released a Les Paul "Less+" variant, with a much thinner body than the traditional Les Paul, while otherwise looking identical. It feels very comfortable to play (at least for me), and IMO it makes it a better guitar than the standard Les Paul, although they only seem to have made them for one year. It also has automatic tuning pegs (Gibson G-Force), which is a big quality of life improvement IMO.

(The only issue was the stock nut they give you, it tends to have poor tuning stability... it would grip the wound strings while tuning in a way that makes it hard to arrive at the right pitch. But replacing it with a graphtech tusq synthetic bone nut fixed that issue completely.)

Re:Ask HN: Favorite Thing Built to Last? by kgwxd on Friday December 10, 2021 @02:34PM (#29514446)
I'm actually in the market for a decent guitar I'll have to try one out. The original hard edge was a little annoying but my main issue is more with how far to the right the guitar sits compared to a Strat, this looks like it might sit the same.
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:00AM (#29511413)
totally agree, not the best choice ergonomically (btw. check out Strandberg Guitars)

mine rarely sees the sunlight because i get tired quickly

but i won't be selling it, the value has skyrocketed ~10-20% since the pandemic

Re:Ask HN: Favorite Thing Built to Last? by omarhaneef on Friday December 10, 2021 @11:00AM (#29511414)
You have to wear it around your knees.
Re:Ask HN: Favorite Thing Built to Last? by kgwxd on Friday December 10, 2021 @11:13AM (#29511565)
Do they come with a Slash hat, or is that sold separately?
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:19AM (#29511653)
fun fact: if you a buy a Slash collection Les Paul, you'll get a nice illustration on the back of the headstock

https://guitar.com/wp-content/uploads/2020/01/Gibson-Slash-L...

Re:Ask HN: Favorite Thing Built to Last? by omarhaneef on Friday December 10, 2021 @11:25AM (#29511732)
It is not just Slash. Even Jimmy Page wore it almost by his ankles. Pretty sure it improves feedback.
Re:Ask HN: Favorite Thing Built to Last? by gaws on Friday December 10, 2021 @08:32PM (#29517556)
> edit: if you consider buying, i'd definitely recommend getting a used one

Where's a good place to look for one?

Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @10:19PM (#29518096)
check out reverb.com
Re:Ask HN: Favorite Thing Built to Last? by velcrovan on Friday December 10, 2021 @10:55AM (#29511354)
The source code for the HN website. That and my 2001 Toyota Corolla.
Re:Ask HN: Favorite Thing Built to Last? by JoelMcCracken on Friday December 10, 2021 @12:34PM (#29512773)
Sometimes when I think about what i'd do if I had plenty of wealth to invest as I want to, I imagine starting a business that just makes standard things that are built to last.
Re:Ask HN: Favorite Thing Built to Last? by jacknews on Sunday December 12, 2021 @01:46AM (#29527668)
I'd be a customer for sure.

Iamgine how much effort could be saved if instead of every manufacturer designing their own fridge, and parts, there were some standard designs, and standard interfaces, so that you could mix and match (and replace, or upgrade), motors, compressors, shelves, doors, etc. Perhaps an open-source community trying out new designs too.

Re:Ask HN: Favorite Thing Built to Last? by CaptArmchair on Friday December 10, 2021 @11:20AM (#29511669)
My cast iron dutch oven. Keeping tabs on the castiron subreddit, there's quite a lot of cast iron heirlooms being handed down generations which are just as usable today as when they were newly bought. I use mine for baking bread.
Re:Ask HN: Favorite Thing Built to Last? by SwiftyBug on Friday December 10, 2021 @02:10PM (#29514119)
I'm surprised no one mentioned the Kindle yet. Mine is 10+ years old and works just as well as it did the first day. I can even browse and purchase books from the Kindle Store directly from it (as opposed to my 4 years old smart TV that can no longer open some of the apps). Not to mention the battery, which is still impressively lasting.
Re:Ask HN: Favorite Thing Built to Last? by distantaidenn on Friday December 10, 2021 @11:21AM (#29511684)
Good pair of handmade American boots. Bought a pair of Chippewa for about $500 several years ago. Aside from the occasional resole, the leather only looks better with age -- and all you need is a good polish and brush to get them ready. You can also dress them up or down, depending on the occasion.

In my opinion, shoes are some of the few things you should splurge on -- but do look at build quality, and not just a brand name. For example, some of the higher end Timberlands will run you about $250-$350. Despite the high-price they are cheaply mass-produced in China, and the build quality reflects that.

Re:Ask HN: Favorite Thing Built to Last? by speedcoder on Friday December 10, 2021 @01:32PM (#29513632)
I love my Mephisto shoes. Originally bought them in 92 and one resole later am still wearing them most every day.
Re:Ask HN: Favorite Thing Built to Last? by xtiansimon on Friday December 10, 2021 @01:20PM (#29513466)
Have sort of hi-low tastes. One of my favorites is military surplus—- boots, pants, jacket—-for daily work around the house type clothes.

And another just came to mind, I have a smallish bag I bought on eBay “Field Pack M1945”, and another is the “Swiss Army Rucksack” c1970.

It’s rare to find much “built to last”, so instead I look for good warranties.

Re:Ask HN: Favorite Thing Built to Last? by arprocter on Friday December 10, 2021 @05:01PM (#29515988)
I have a West German parka that I got over a decade out of before it finally started to go

£35 with the liner...they seem to go for about twice that these days

Re:Ask HN: Favorite Thing Built to Last? by 0_____0 on Friday December 10, 2021 @11:03AM (#29511439)
Outlier Slim Dungarees. Probably has 10x the lifetime of a pair of jeans.

Not built to last in the sense that you'll hand these trousers down to your grandchildren, but built to last in that they're made with a Nylon-Poly blend that is insanely durable. I probably have 600 wears on a single pair, and while some of the stitching at the pockets has come loose, the textile itself shows no signs of blowing out in the knees.

Re:Ask HN: Favorite Thing Built to Last? by more_corn on Friday December 10, 2021 @04:09PM (#29515481)
Everyone should have at least one really nice knife in the kitchen. It makes cooking a joy. I have a wusthof, Shun is amazing. Start with a chef’s knife and move onto paring knife. Those are the two most common knives used. An 8” utility knife is next.

I still cook in the cast iron I inherited from my mom. I think it was a lodge, but the branding marks are illegible. Way better than Teflon.

I have a long handled flex head 3/8ths drive Snap On driver that is the most comfortable tool I’ve ever wielded. I would be honored to pass it on to a grandchild. You don’t have to go tops end, just smooth and reliable. I encountered a very nice Milwaukee set at a client location recently.

Kitchen Aid mixers. I bake more because we have a good mixer.

A 1984 MercedesBenz 300 turbo diesel. They’ll go for a million miles, simplicity, efficiency, durability.

I broke a fastener in a plumbing part last night. I fixed it and got us going again preventing downtime and a costly plumber visit. My gear wrench tap and die set will probably continue to provide value for the next 50 years.

Re:Ask HN: Favorite Thing Built to Last? by avh02 on Friday December 10, 2021 @11:20AM (#29511675)
Hi-Fi speakers - mine aren't particularly wow, but I've had them (and my brother has had his) since the mid-late 2000's, getting daily usage when possible and moving through multiple countries, in and out of storage. They've been run on different amps/receivers, but we've both kept our speakers consistent.
Re:Ask HN: Favorite Thing Built to Last? by jalgos_eminator on Friday December 10, 2021 @11:39AM (#29511905)
Since most people here are just saying "old stuff", I'll throw in a product you can buy right now for reasonable money: Japanese made hand tools, specifically JIS screwdrivers. These are required if you work on Japanese motorcycles, and from what I've heard old Japanese cameras too. They fit phillips fasteners better than a regular phillips driver because the flutes are straighter so they are less likely to cam out. I've bought a few Japanese tools, for more money than the Chinese or USA made equivalents, and they have justified their price to me every time.

Another vote is for Mitutoyo vernier calipers with both inch and metric reading. No batteries, and still made in Japan. If the Japanese wanted to make something cheap, then they wouldn't make it in Japan. I view made in Japan as a mark of quality these days.

Re:Ask HN: Favorite Thing Built to Last? by scottlilly on Friday December 10, 2021 @12:22PM (#29512581)
I have a mechanical IWC watch from 1947 that still works well, and some other, newer mechanical watches I expect to last for decades (with proper maintenance).

During the lockdown, I've replaced most of my kitchen items with things I expect to last a long time - like high-quality knives and sturdy stainless steel pots and pans that can be used on any cooktop (including induction).

My shoes and boots can all be resoled, and I own enough pairs to rotate through them, which should help them last longer.

I'm at the point in life where I have most things I really need. If I do buy something, it's usually to replace a low-quality item with something built to last.

Re:Ask HN: Favorite Thing Built to Last? by danesparza on Friday December 10, 2021 @11:31AM (#29511803)
So many.

My Dachstein Woolwear sweater: https://www.sweaterchalet.com/dachstein-woolwear-boiled-wool...

Rancourt & Company shoes (I wear their sneakers): https://www.rancourtandcompany.com/

Redwing work boots: https://www.redwingshoes.com/work/mens/boots/

Savotta LJK modular pack: https://www.savotta.fi/collections/products

Gransfors Bruk (hand forged) Swedish axes: https://www.gransforsbruk.com/en/

Bark River CPM 3v knives (specifically the Bravo 1): https://barkriverknives.com/

Benchmade pocket knives: https://www.lamnia.com/en/p/6716/backpacks-bags-versipacks/s...

PB Swiss screwdrivers: https://www.pbswisstools.com/en/

Mac Kitchen Knives: https://www.macknife.com/

Kitchenaid mixers: https://www.kitchenaid.com/countertop-appliances/stand-mixer...

Le Creuset enamel coated cast iron (specifically the Dutch ovens): https://www.lecreuset.com/

Cambro containers (to organize a pantry): https://www.cambro.com/

Hancock and Moore chairs and couches (specifically their leather stuff): http://hancockandmoore.com/

Re:Ask HN: Favorite Thing Built to Last? by itronitron on Saturday December 11, 2021 @04:27AM (#29519666)
>> Hancock and Moore chairs and couches

I think the folks here on HN would be particularly interested in their selection of game chairs.

http://hancockandmoore.com/Products/Search?TypeID=CAT27

Re:Ask HN: Favorite Thing Built to Last? by danesparza on Monday December 13, 2021 @10:37AM (#29540523)
lol
Re:Ask HN: Favorite Thing Built to Last? by sircastor on Friday December 10, 2021 @11:03AM (#29511441)
I love the old South Bend and Atlas Lathes and Mills. I'm amazed that a machine made 100 Years ago can remain functional and as useful as it was on it's first day. It reminds me of the importance of maintenance.
Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @11:18AM (#29511650)
I donated an old South Bend that I restored when I left Canada to a United States friend living in the Rockies. Put it on blocks in the back of the pickup and drove it all the way there under a tarp. That was quite the trip. But I was really happy to find a community of people that were sure to put it to good use.

I really loved that little lathe, as long as you went easy on the feeds it would work just fine. No play at all in spite of being ancient.

Re:Ask HN: Favorite Thing Built to Last? by UncleOxidant on Friday December 10, 2021 @11:39AM (#29511898)
My '98 Honda Civic. Since WFH I rarely drive it anymore, but it starts right up when I go out to start it. Easy to repair and parts are relatively cheap. 80's & 90's Honda products were built to last.
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:11AM (#29511532)
I should also add Herman Miller Aeron Chair

12 Years of Warranty, but expect it to last well beyond that

Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @11:20AM (#29511668)
They definitely last longer than most servers. And than the start-ups that bought them when they were new...
Re:Ask HN: Favorite Thing Built to Last? by ushakov on Friday December 10, 2021 @11:23AM (#29511707)
yeah, that's actually the reason i've got one

as a constant reminder that startups fail

Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @12:16PM (#29512495)
I bought mine for $.10 on the dollar...
Re:Ask HN: Favorite Thing Built to Last? by alpha_squared on Friday December 10, 2021 @11:13AM (#29511557)
Street lights. They have surprisingly high availability with a failure mode that results in some reduced efficiency for traffic management.
Re:Ask HN: Favorite Thing Built to Last? by iamwpj on Friday December 10, 2021 @11:29AM (#29511790)
There's little things that are built to last scattered all over my home and office. A chunk are inherited from previous generations others are unsuspecting items I bought that just keep chugging (I'm looking at you $9 toaster from Walmart). I have a few things that I've bought that I really hope they are built to last -- part of my motivation to purchase was this quality.

Of course building things to last isn't obsolete. Most things we buy are for a purpose. Typically that purpose results in them being "used up". Socks get holes, mechanisms wear -- all of that is normal and expected. Periodically through either some extra care or happenstance the item doesn't get used up in an expected period of time. It seems it was BUILT TO LAST, over time our kids and dependents will marvel at the way things used to be built. Some day in 40 years someone will look at your Aeropress and bemoan, is "built to last" obsolete?

Re:Ask HN: Favorite Thing Built to Last? by dogman1050 on Friday December 10, 2021 @06:14PM (#29516628)
A circa 1950 15-inch floor model Atlas drill press. Passed down to me by the son of the original owner. Simple and robust.

My 1987 Porsche 911. The design and build quality is visible and tactile. Air-cooled, simple, albeit not effortless to maintain. I'll never part with it.

Re:Ask HN: Favorite Thing Built to Last? by mitchbob on Friday December 10, 2021 @10:09PM (#29518047)
Our Dualit Classic two-slice toaster. An earlier one did break, a couple of decades ago, but Dualit sent a new one that's been in daily use ever since. Not cheap, but for cost-for-slice it's probably unbeatable.
Re:Ask HN: Favorite Thing Built to Last? by tarboreus on Friday December 10, 2021 @11:43AM (#29511941)
Emacs. I plan on still using it in 30 years.
Re:Ask HN: Favorite Thing Built to Last? by marto1 on Friday December 10, 2021 @02:12PM (#29514148)
And I'm sure Emacs plans to outlive you ;)
Re:Ask HN: Favorite Thing Built to Last? by tarboreus on Wednesday December 15, 2021 @10:45AM (#29567517)
I hope it does. :)
Re:Ask HN: Favorite Thing Built to Last? by zbuf on Friday December 10, 2021 @11:41AM (#29511927)
The Technics SL-1200mk2 (or 1210, in dark grey) turntable for vinyl records.

In case you aren't aware just how influential this design is: specifically the mk2 as it was manufactured to (almost) the same design all the way from 1979 to 2010; despite newer 'mk' revisions being also available.

Weighing 11kg, mine is 30 years old and I expect it to last for as long as there is the right voltage from the mains supply and records to play on it.

https://en.wikipedia.org/wiki/Technics_SL-1200

Re:Ask HN: Favorite Thing Built to Last? by prova_modena on Friday December 10, 2021 @11:26AM (#29511750)
Fadal VMC40 CNC mill. Mine is a 1984, making it one of the first ones made.

This was one of the first wave of CNC machines made and priced for a smaller job shop environment. It's not large (axis travels are 20" X, 16" Y) and it's not fast by modern standards (slow travel, max 10k rpm spindle speed). However, it's easy to use, not over-complicated, rigid with box ways, and DIY repairable. There are several places to get affordable parts and support. I have yet to encounter a component that is "no longer available," a common occurrence on other machinery. I've had a specialist out to inspect it when I got the machine, but other than that I've been able to fix and maintain it easily. Besides, very little has gone wrong with it, and I started running it hard straight out of a 20 year hibernation.

The control electronics are built with a backplane design that makes it extremely simple to swap and upgrade components. The control boards themselves are made with all through-hole components, making board-level repairs easier. I upgraded the main control board from a '84 version to a '95 version in about 30 minutes (gaining speed and a lot of UI improvements). If I wanted, I could retrofit a fully modern control system in a couple hours. If you're not in the industry this may not sound significant, but if you're familiar with CNC machines this is huge for prolonging the life of a machine. For comparison, older Haas control boards are known to fail and the only current recourse is to pay Haas about $20k for a full retrofit by a factory tech.

The interface is text based and runs on a CRT but it's incredibly simple, ergonomic and easy to learn. Discoverability is excellent, with built-in documentation and useful error messages. If Siemens and Fanuc CNC controllers are emacs and vim, Fadal is nano. If the battery backup goes bad, I can restore the control parameters using a human-readable menu with meaningful variable names in about 5 minutes from memory. On my Mazak lathe, this takes hours of entering hex codes into numbered fields. In comparison to other machines I've used, the Fadal feels like it's made to be used by machinists, not gatekept by factory service techs and expensive training courses.

The worst part of the machine is that it has a total loss mist lubrication system for the spindle, which requires added ventilation otherwise it will fill the shop up with oil mist. I would also like a full enclosure, which mine doesn't have but later ones do. But other than that it's incredibly resilient, high quality and simple machine, the likes of which simply aren't being made anymore.

Re:Ask HN: Favorite Thing Built to Last? by muzani on Saturday December 11, 2021 @09:05AM (#29520929)
Those Little Tikes toys. I still have one from when I was a baby. My 1 year old is a lot more aggressive than I am. He will smash most cheap toys within a day. He tossed a heavy Little Tikes toy this morning and a piece fell out, one of the hinges that held it together. I thought it was finally broken, but the piece easily popped back into place.
Re:Ask HN: Favorite Thing Built to Last? by davidw on Friday December 10, 2021 @11:14AM (#29511590)
Too early to tell, but these boots I got last year feel very solid, even if they're not beautiful https://www.redwingshoes.com/work/mens/soft-toe/SuperSole-01...
Re:Ask HN: Favorite Thing Built to Last? by sheepybloke on Friday December 10, 2021 @03:45PM (#29515242)
Chrome backpacks. I bought one used from someone at college around 6 years ago and it has been a champ. I've used it daily since and it still looks like the day I bought it. The water protection was great during a Michigan winter, and is incredibly comfortable, even on long walks. Cannot recommend it highly enough!
Re:Ask HN: Favorite Thing Built to Last? by gaws on Friday December 10, 2021 @08:34PM (#29517563)
Which model?
Re:Ask HN: Favorite Thing Built to Last? by sheepybloke on Tuesday December 14, 2021 @12:15PM (#29554216)
I got their Citizen Messenger Bag. I love their aesthetic, especially with the belt buckle across the chest: https://www.chromeindustries.com/product/citizen-messenger-b...
Re:Ask HN: Favorite Thing Built to Last? by justsomeuser on Friday December 10, 2021 @12:52PM (#29513075)
Stainless Steel electric steamer, Magimix:

https://www.amazon.co.uk/Magimix-11581-Multi-Functional-Brus...

I had around 3 plastic ones before this, which last about a year or two.

I have had this around 10 years.

Re:Ask HN: Favorite Thing Built to Last? by thrower123 on Friday December 10, 2021 @11:20AM (#29511670)
I have one of the first model of Husqvarna 372 chainsaws that came out in '99 or 2000. My dad used it for six or seven years professionally as a logger before he handed it down to me, and I've put, at a conservative estimate, 1000 more hours on it since then. Still runs like a top.
Re:Ask HN: Favorite Thing Built to Last? by hiyer on Friday December 10, 2021 @01:15PM (#29513393)
Bullworker isometric workout equipment[1]. My dad bought it in the 70s way before I was born, and I still use it regularly.

1. https://www.bullworker.com/product/bow-classic/

Re:Ask HN: Favorite Thing Built to Last? by the_only_law on Friday December 10, 2021 @10:58AM (#29511386)
I have a lot of vintage furniture, picked up from various thrift shops and such. A lot of solid wood stuff. Significantly better than the typical cheaper pressboard/think metal stuff and insanely cheaper than any modern furniture build with solid materials.
Re:Ask HN: Favorite Thing Built to Last? by p0d on Saturday December 11, 2021 @04:08AM (#29519579)
I have had the same CAT work boots for 30 years. They have been up mountains and in swamps.
Re:Ask HN: Favorite Thing Built to Last? by carapace on Friday December 10, 2021 @11:57AM (#29512150)
Miele vacuum cleaner.

Cast iron pan.

Re:Ask HN: Favorite Thing Built to Last? by kingcharles on Friday December 10, 2021 @12:40PM (#29512879)
Miele makes shit to last. Never cutting edge, fancy features, but made to last.
Re:Ask HN: Favorite Thing Built to Last? by usrbinbash on Friday December 10, 2021 @12:38PM (#29512839)
The C Programming Language.
Re:Ask HN: Favorite Thing Built to Last? by marto1 on Friday December 10, 2021 @02:12PM (#29514138)
It's like DNA of the programming world at this point.
Re:Ask HN: Favorite Thing Built to Last? by aeharding on Friday December 10, 2021 @11:17AM (#29511633)
Omafiets
Re:Ask HN: Favorite Thing Built to Last? by speedcoder on Friday December 10, 2021 @01:56PM (#29513940)
Re:Ask HN: Favorite Thing Built to Last? by jacquesm on Friday December 10, 2021 @11:19AM (#29511659)
Hehe, those are indestructible. They are fished out of the canals in Amsterdam and restored to be put back into service again. They weigh a ton as well.
Re:Ask HN: Favorite Thing Built to Last? by derbOac on Friday December 10, 2021 @11:58AM (#29512164)
Sori Yanagi water kettle.

Gillette Slim Adjustable DE safety razor.

Our steel bedframe from Room and Board.

Re:Ask HN: Favorite Thing Built to Last? by moltar on Sunday December 12, 2021 @02:44AM (#29527845)
Lada
Re:Ask HN: Favorite Thing Built to Last? by hulitu on Friday December 10, 2021 @12:45PM (#29512957)
The American empire.