How about cleaning up after old people when they mess themselves? How about any of the DVD sorting facilities at Netflix, which is practically the exact job you described? How about the massive amount of call centers we have in the US? How about almost any low level job in agriculture? I don't think your imagination is deep enough to fathom how bad a job can really be, even in a first world nation.
There are plenty of people who are willing to work or already work a monotonous or difficult job for low pay here in the US.
More investment should go into automation, but given that the world labor market makes humans so cheap(mainly due to not having the care about the workers health or safety), human labor usually wins out.
Once all these jobs go to automation, what do you do with the workers? That is then societies problem really, we'll need to figure out if there should be a social net that guides people into higher education so we have people building/repairing robots instead of doing what the robots are actually doing. Given the vested interests in the status quo, this is probably not too likely to happen in the near future.
Also, the solution to the automation problem is not higher education, the solution is the return of the skilled laborer. You can't automate a robot to drive to a customer's house, cut open some drywall, fix a plumbing leak, restructure some electric piping to a new section of the wall, install a socket, make a report and get it signed by the customer, get payed, drive back to the company hub, and finally give you the money. Hell you can't automate a robot to make custom dragon blood forged steel swords, which we'll probably need for the zombie apocalypse. Bachelor and masters degrees are currently too easy to get to the point even a monkey could get a bachelors these days, specially if it's a wealthy monkey. The result is that GOOD plumbers, electricians, or dragon blood forged steel sword making blacksmiths are so hard to get this days because all the offspring of skilled laborers want to go to a fancy school to be doctors, lawyers, or architects, because it's all the rage to get a university degree this days.
For what it's worth, most people actually doing the "cleaning up after the elderly" job are certified nursing assistants, who often earn basically a notch or two above minimum wage.
The pay might be shit, but we'll make it up in overtime:)
1000 yen per hour is about £7.90; the UK minimum wage is £5.93 ((if you're over 21) but there are some tax breaks and benefits available to some low paid workers). There are plenty of jobs at that minimum wage, and many of those jobs will be as dull as checking gaskets.
How about cleaning up after old people when they mess themselves?
You know, some people actually appreciate what their parents have done and take pride (or at least sympathy) paying back that debt when the time comes.
I'm not sure that you grasp the working conditions in some parts of Asia (i live in Hong Kong). People would be willing to take the job, but they'd ask for benefits that wouldn't even compare. I don't think there are, as you say, plenty of people willing to take on these types of jobs in their present state. In fact, there are already sectors in the US that are having a hard time finding people because people have generally become too prideful. Just look at the skilled trade problem, which is way better work than what patio11 is talking about.
Any company in the US that pays significantly more than minimum wage and which claims "we can't find workers" is basically lying.
When they say "we can't find workers to do X" what they meaning is "we can't worker to do X [low-voice-over]between the ages of 23 and 27 who graduated in the top 15% of their class, with six+ year of experience in X and who have strong willingness to work 100 hours/week and able to start yesterday[/low-voice-over]"
We've been looking for technical employees (cable'ers, phone techs, etc, etc) for a while (in Florida) and usually come up with crap. We start at $20hr, with full benefits, and a strict 40 hour work week (we like to avoid overtime). That is a very high starting salary in Florida. And we've hired and fired 6 different people for the same position over the last 2 years.
And I can't even tell you how hard it is to find a decent programmer here. Sure there are tons of guys who (barely) write Java or VB. None are remotely qualified to write code for my sister let alone the company. Either I end up writing it or I outsource to NYC. And when you do find someone good, there's a bidding war. I lost a programmer I wanted to hire to one of my customers (a hospital). They offered us a fee if we'd send him over. I sent him him over. They're a good customer so we turned down the fee. :)
These are common complaints down here in Florida; the 4th biggest state in the country by the way. It's not helping that our school system down here is a fucking mess. And that many parents are more concerned about their kids learning evolution than math.
There is one ray of hope for us: the military. I just hired our 3rd vet (I'm a vet by the way too) from a job fair held at the Palm Beach VA.
Q: "We pay salaries competitive with the market average, why can't we find good experienced programmers or engineers?"
A: "So you want top talent for average wages? See the discrepancy here?"
I can hire PHP and Java programmers rather easily, but both groups would have a lot to unlearn.
Have you considered trying to hire from abroad? You may need a high salary by USA standards to hire USA workers to work in São Paulo, but tis doable. You have now found the market rate for programmers in São Paulo
I was writing from the Bay Area. I suppose I should realize how different the rest of the country is.
Can you elaborate on that?
But otherwise if a worker makes the more money, why not go for it?
I was speaking more about people who work in assisted living facilities or nursing homes who do not know the people they clean up after personally. Often these people are probably lucky to be making $13/hr an a hour. Just like there are those who don't mind such a job, I am sure there are those who don't mind sorting gaskets either.
"I'm not sure that you grasp the working conditions in some parts of Asia (i live in Hong Kong)."
Are you suggesting they're good or bad? There are some decent places to work in Asia if you're on top. Job conditions are slowly improving, but often you'll still hear about workers living in boarding houses provided by the company so they can work 12 - 16 hours days 6 days a week. Additionally patio11 was talking about first world countries...
"I don't think there are, as you say, plenty of people willing to take on these types of jobs in their present state. In fact, there are already sectors in the US that are having a hard time finding people because people have generally become too prideful."
You probably aren't looking too hard then. In the current economy you have people with masters & PhDs applying at McDonalds or other low wage/low skill jobs. Often these employers do not hire these people because of "over-qualifications". I also don't think that a lack of skilled tradesmen is due to pride, but perhaps due to a refocusing towards service sector jobs & the deterioration of our education system. The US does not have a standardized vocational education path & often many "vocational colleges" here are scammy for profit colleges that offer little benefit & a lot of debt to their students.
My hands are keyboard-smooth these days, but I'm always suprised when people are suprised that people make things with their hands, when they spend all day surrounded with things made with someone's hands.
About automation: That robot clock has been running since Henry Ford. Most manufacturing jobs (if not all) are a human loading a machine with material, monitoring the machine so it doesn't jam, tear itself apart on, or shred the material, then pulling the finished product which is being ejected as quickly as a humn can keep up, wrapping it, and getting it to the next machine. Every hour the machine breaks down, and the operator figures out how to bring it back up quickly, or a mechanic has to come and do a medium to full scale repair depending on the damage.
I'm not sure how magic robot arms can change that, until they can figure out how to load themselves with rubber from the truck, and how to fix themselves really quickly.
http://science.discovery.com/tv/how-its-made/ and https://secure.wikimedia.org/wikipedia/en/wiki/How_It%27s_Ma...
Most of the production is heavily automated, but there are always a few humans in the loop somewhere. In a lot of cases, it is exclusively loading the machine with some odd-shaped component, again and again as fast as they can.
Sometimes there's a bit of excitement (poorly designed safety guards or practices), just waiting to trip someone up after they zone out midway through their 12-hour shift.
I don't know what the failure figures would be like, but it's quite possible you do need that engineer on call, with his lateral-thinking brain and dexterous monkey-fingers, but otherwise, robots can do the lot, it's just a question of cost.
See https://secure.wikimedia.org/wikipedia/en/wiki/Lights_out_%2... for examples.
Lightbulbs are probably similar to Pato11's original story; robots which can handle the glass and construct the filament supports require extremely delicate and precise control, so it's cheaper to use people. For now.
P.S. Looking for a picture of the Cheshire brought back memories: http://i.ebayimg.com/00/$%28KGrHqF,!g0E1fPtSCr7BNeqtoSh0w~~_...
I've had worse, and I've had it pretty good.
I'd say my first job was shit, but it's a thousand times better than being a drone in a Japanese gasket factory. I'm not trying to be antagonistic, I'm just curious... What jobs have you had that where so bad?
The wood was so rough that I went through a pair of leather gloves in less than a day. (I eventually figured out to wrap them in duct tape while still new, and keep wrapping them whenever I got a chance.)
At least the weather was reasonable. There are comparable jobs in much hotter and much colder weather.
And then there are jobs where it's easy to lose limbs or lives.
That's not counting the gross jobs, like picking up road kill, or the emotionally draining jobs, like putting abandoned pets to sleep.
The robots will be paid the same thing whether they run in Japan, Vietnam, Toledo, or downtown Manhattan.
Call me crazy, but why are we arguing about "manufacturing jobs" instead of building robots?
If I recall my stats correctly, the US is #2 in robots, which isn't exactly bad. (Lagging Japan, as a result of 30 years of policy decisions. Japanese government/industry put their chips down on "robots win the future" many years ago and this was not a disastrously stupid decision.)
While I agree that the level of technology and packaging in Japanese robots in generally higher than U.S. counterparts, to take a rather cheap shot, it was U.S. drones and robots that were first on the scene.
Due to the pedigree of mobile robotics, the U.S. needed systems that worked now and not the future...resulting in a variety of heavy duty operable robots capable of working in difficult environments.
Here's arguably the most advanced robot in the world handling perfectly normal stairs
http://www.youtube.com/watch?v=ASoCJTYgYB0
http://www.youtube.com/watch?v=ASoCJTYgYB0
Conclusion? Make the robot more like a crappy old American robot. http://www.autoguide.com/auto-news/2011/08/hondas-asimo-to-a...
It's critically important PR for the Japanese robotics industry to respond to Fukushima with something of utility. Otherwise these decades of work and millions of Yen in R&D haven't amounted to much more than an interesting series of public demonstrations.
Interesting you mentioned exoskeletons. The US is 5 to 10 years away of getting them on a battlefield. They're commercially available in Japan for medical use. (I'm not making a value judgement on that, except to the extent that "You could actually buy this" is superior to not being able to buy it.)
Actually that's a very good point, and a fascinating demonstration of the differences in commercial funding for a technology vs military funding and the similar but completely different kind of tech that comes out of that.
They had to turn to either a US or French robot to enter the reactor.
If Japan builds robots for the factory and the US builds robots for the battle field, it seem logical that US robots would be more useful in nuclear disaster. An power plant leaking hard radiation after a hydrogen explosion does resemble a battle field more than a factory floor, after all.
That aside, it's a fair point— lots of people are working on robots. But we should be building more robots. We shouldn't be talking about "how can we create American jobs," we should be talking about "how can we replace every American job with a robot."
It would be a good conversation. I don't hear it starting. In fact, there was discussion of these issues in the 1960's and 1970's. By now, with the various crises on our heals, no one wants to consider the problems in this fashion.
Real happiness seems to come from something like the Buddhist ideas of mindfulness and acceptance, and that's true whether you're a poverty-sworn monk, a janitor, a CEO, or a pot-smoking layabout.
The idea of "rewarding work" vs. "empty hedonism" is an arbitrary Western construct with little basis in reality.
http://www.ncbi.nlm.nih.gov/pubmed/690806 http://en.wikipedia.org/wiki/Hedonic_treadmill
That's not to say that working, alone, producing happiness is a correct idea, but it might make sense that accomplishment does. And these levels of accomplishment - cleaning the floor well for a janitor, for instance - can differ. Most people desire to "make a difference," another way of saying the same thing. If you're talking about deathbed wishes when looking back on a life, the more positive impact your life visited on others, the better.
Well, this is only one scenario of the things that can happen.
That's a big assumption there. More likely, companies will experience higher profit margins rather than pass along the entirety of the cost savings.
What exactly is that a measure of?
Let's say that, as a middle-class American, I consume enough to employ ten manual laborers full-time. If we have ten robots for every person, then everyone can live like me and no one has to do the physical labor.
Every day, a couple hundred workers report to the factory. The most labor-intensive step in the process is taking a sheet of approximately 1,000 gaskets, manually removing them with a tweezer, inspecting them under a jeweler's loupe, and depositing the passes into the waiting outgoing package. When you fill it, it gets wheeled away for shipping. Your quota is 1,000 passed gaskets per hour, for which you are paid approximately 1,000 yen (at least, that was the pre-crash wage), or about $13 at today's prices.
When you say "We want our manufacturing jobs back", this is the kind of job you really want. It is easily the worst legal job I've heard of in a first-world nation. There's also practically a clock on the wall saying Time Until Robotic Arms Are Sensitive Enough To Do This Without Damaging An Unacceptable Portion Of Gaskets.
One reason that (pre-crash, anyhow) this neighborhood had a lot of immigrants is that the typical worker at this sort of factory 30~50 years ago was a Japanese woman in her twenties and that these days the job is a job Japanese women mostly won't do.