The Pi Zero 2 W doesn't seem to do anything at all (no LED activity, no HDMI output) unless there's a microSD card inserted with a valid bootloader and DTB that supports it.
I just finished watching your YouTube video, so thanks for providing all of this insight. A new Pi Zero will certainly make small handheld emulators a lot more promising...
I've done some fairly fancy Python app development under Linux on a 300mhz embedded ARMv6 board with 64MB of ram, so for lots of things the Pi Zero is already overkill. But an actual OS (i.e. Linux) does make programming a lot easier than an MCU board with an RTOS. So how about a "Pi -1" (minus one) with 1/4 of the resources and power consumption of the Pi 0?
[0] https://mlagerberg.gitbooks.io/raspberry-pi/content/5.1-powe...
Also, I'm curious what use-case do you have that would need an RTOS?
If you need more memory just get the pi4 and a suitable power brick for it
Zero W goes up to 160 mA at load, while Zero W 2 gets up to 400-500 mA due to the three extra CPU cores.
[1] https://www.jeffgeerling.com/blog/2021/look-inside-raspberry...
Edit: That works! See: https://www.jeffgeerling.com/blog/2021/disabling-cores-reduc...
Another comment says /sys/devices/system/cpu/cpu[0-n]/online doesn't work, but I think you can get pretty far by changing the CPU affinity at the cgroup or process levels (for userspace) and on /proc/irq/default_smp_affinity (for interrupts). There are likely some kernel threads that would still run on the other cores, but this is reasonably close.
In particular, looks like setting CPUAffinity= /etc/systemd/system.conf will set a default for all of userspace that you can override for particular things as desired.
zstd could be slightly slower, although according to some benchmarks, it decompresses faster.
zram is the compress-in-memory like you have in Windows and ChromeOS and zswap is the compress-on-disk in case you want to replace SD cards.
zswap is a compressed (memory) cache that uses the frontswap API to evict least recently used pages to a swap device. Evicted pages are not compressed.
zram is more of a general purpose component; whereas zswap is a more specialized component.
https://www.kernel.org/doc/Documentation/blockdev/zram.txt https://www.kernel.org/doc/html/latest/vm/zswap.html
I have been using 3As because of the reduced size (and the full sized HDMI port, which comes in handy), so I hope those get updated to a 4-grade chipset —- I feel that there is a gap between the Compute Module and the A that needs filling.
It seems like there's still one product, but increasing divergent use cases for that product.
There have been a lot of commenters in this post basically complaining that there are too many Raspberry Pis. From a practical standpoint, I don't get the complaint (I mean, how does that personally harm them in any way?).
The Raspberry Pi foundation's mission is to increase technical literacy worldwide by making and selling very low-cost yet reasonably high-performance computers. They also do quite a lot of education and outreach themselves.
What people here seem to be forgetting is that these things take money and instead of spending time fundraising (a huge cost and time sink for most non-profits), they decided to tap into the maker and computer geek communities, as well as industry. When people like you and me buy these boards to play with or build into our projects, we are subsidizing all of the foundations design, education, outreach, activities. Also when companies build products and internal solutions around the Pis. The whole reason they still sell the (mostly) original Raspberry Pi board is because there are systems, processes, or fleets still using them. They'll continue to use them until a design change is required. As long as its relatively easy for the foundation to squeeze out a new batch every so often (all of the hard work of designing them is already done), what does it hurt?
Inside a case, it quickly heats up under load!
In all cases, the CPU frequency starts stepping down when the temp hits 80C, and on the default clock it will go to 800 MHz until the temp is 79C. If it reaches 85C, it will throttle severely, all the way down to 400 or 600 MHz, I believe, until the temps get back down to 84C.
This means it can run 64-bit Pi OS, but it is memory-limited and even some of the benchmarks I ran needed extra swap space to complete. But for anything that does run in the 512 MB of LPDDR2 RAM, it is at least twice as fast as the Zero/Zero W, and sometimes 3-8x faster, depending on how things handle threading (4 cores is better than 1!).
My biggest concern is overheating—even at the base 1 GHz clock, it will start to throttle after a few minutes in a case with no airflow or heat sink. You can overclock to 1.2, 1.4, or even in some cases 1.5 GHz, but it starts throttling a lot more quickly unless you have really good cooling.