Re:Raspberry Pi Zero 2 W
by giantrobot on Thursday October 28, 2021 @09:45PM
(#29034279)
Power savings is complicated. A Pi board is going to have a minimum power usage with the CPU only being a portion. A lower clocked CPU on a Pi -1 might reduce peak power usage but might not get much savings at idle vs a comparably configured Zero. The Zero would also have the option of underclocking for peak power savings with the ability to spin back up to work faster to return to idle faster. Don't forget disabling board components can yield baseline power savings on Pis [0].
[0] https://mlagerberg.gitbooks.io/raspberry-pi/content/5.1-powe...
I've done some fairly fancy Python app development under Linux on a 300mhz embedded ARMv6 board with 64MB of ram, so for lots of things the Pi Zero is already overkill. But an actual OS (i.e. Linux) does make programming a lot easier than an MCU board with an RTOS. So how about a "Pi -1" (minus one) with 1/4 of the resources and power consumption of the Pi 0?