News for hackers. Stuff that matters.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by api on Monday March 29, 2021 @10:54AM (#26622613)
Rust is already very close to C and C++ performance, and getting to equivalence or possibly better will mean a long slog through these kinds of edge cases. This was already done in C and C++ compiler toolchains, which is why these languages are so fast, and it's a bit of a feedback loop because their popularity and centrality to systems development is what led to the work being done in the first place.

Rust + LLVM will already handily beat a naive bare bones C or C++ compiler that isn't loaded with sophisticated optimization tricks.

If the work is done I expect Rust to be faster than C and C++ for the same reason that C++ can sometimes be faster than C: a more advanced type system can allow better optimization in many cases.

In C++ for example you can do algorithms with templates, while in C you generally end up with function pointers all over the place. See qsort() vs. std::sort<> for one common case.

With Rust you can do all this generic stuff plus leverage better safety to do more strict aliasing optimizations, less unnecessary memory fencing, and so on.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by killercup on Monday March 29, 2021 @11:26AM (#26623168)
> If the work is done I expect Rust to be faster than C and C++ for the same reason that C++ can sometimes be faster than C: a more advanced type system can allow better optimization in many cases.

Every now and then I check in on whether LLVM can deal with rustc spamming "noalias" on all references. You can find the latest change in [1]. While in theory this unlocks _a ton_ of optimizations, noalias is used very rarely in C/C++ code so these compiler passes are not exercised a lot by existing LLVM tests and/or not realized in full.

[1] https://github.com/rust-lang/rust/pull/82834

Re:&& operator chains (and ||, possibly) generates unoptimiz... by amelius on Monday March 29, 2021 @11:44AM (#26623508)
A more advanced type system may also drive you into a corner where you make bad decisions wrt performance.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Blikkentrekker on Monday March 29, 2021 @05:26PM (#26628367)
Only so long as it be mandatory to obey.

Rust was specifically designed so that one can ignore all the restrictions if one be confined and tell the compiler “I know better, and I know it is safe.”.

Of course, if one be wrong in such confidence, u.b. lurks around the corner.

I suppose one big problem with Rust is that it's less specified than in C what is and isn't safe, so it's harder to be so confident.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by titzer on Monday March 29, 2021 @12:12PM (#26624003)
Can you give an example?
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @12:50PM (#26624630)
Not amelius, but one case that happened to me is that Rust requires wrapping a `T` in a `RefCell` if two closures use it as `&mut T`. This happens even if you the caller know that the closures are invoked from a single thread and do not invoke each other, and thus only one `&mut T` will be in effect at any time. This is because closures are effectively structs with the captures as fields, so both struct values (and thus both `&mut` borrows) exist at the same time even though their respective fields are not used at the same time.

Not only do you have to use `RefCell`, but you now also have panicking code when the `RefCell` borrow "fails", even though you know it can't. rustc is also not smart enough to notice the exclusivity at compile-time and elid away the RefCell borrow flag test and the panic branch.

    fn foo(mut cb1: impl FnMut(), mut cb2: impl FnMut()) {
        for _ in 0..10 {
            cb1();
            cb2();
        }
    }

    let mut x = String::new();
    foo(|| x.push_str("cb1,"), || x.push_str("cb2,"));
https://play.rust-lang.org/?version=stable&mode=debug&editio...

Fixed using `RefCell`: https://play.rust-lang.org/?version=stable&mode=release&edit... . Inspect the ASM and trace the use of the string constant "already borrowed"; you'll see it being used for the borrow flag test because it wasn't elided.

The equivalent non-Rust program could use String pointers for the two closures. I'm not sure whether they could be noalias or not, but at the very least they wouldn't need to generate any panicking code.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by comex on Monday March 29, 2021 @02:25PM (#26626131)
FWIW, another option is to use `std::cell::Cell`. That only allows replacing the value rather than borrowing it in place, so you would have to take the value out and put it back after you're done with it, which also results in unnecessary code generation. But there'd be no branch and no panic, so the impact should be less than RefCell. There's also no borrow flag to take up space (not that it really matters when this is a single value on the stack).
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @02:43PM (#26626384)
This is a good point. I always forget Cell can be used with non-Copy types too.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Diggsey on Monday March 29, 2021 @01:12PM (#26625013)
The "used from a single thread" aspect is a red herring: RefCell can only be used from a single thread anyway, and the compiler enforces this statically.

The "state" value in a RefCell is overhead, although it's fairly minor given that it doesn't need any synchronization to access. The extra panic branches are probably the largest overhead.

That said, these overheads stem from Rust's safety guarantees rather than its strong type system: you can have a language with a strong type system that does not do these checks.

Furthermore, there are of course ways to avoid this overhead within safe Rust: if you can use the type system to prove that the cell cannot be borrowed at the same time, then you don't need to do the checks, and in that sense a strong type system can actually help avoid overheads that were introduced by being a safe language.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @01:18PM (#26625111)
>That said, these overheads stem from Rust's safety guarantees rather than its strong type system: you can have a language with a strong type system that does not do these checks.

The difference in semantics between a `&mut T` and a `*mut T` is a type system one. `&mut T` requires that two do not exist at the same time, regardless of whether they are used at the same time or not; this is the contract of the type.

>Furthermore, there are of course ways to avoid this overhead within safe Rust: if you can use the type system to prove that the cell cannot be borrowed at the same time, then you don't need to do the checks, and in that sense a strong type system can actually help avoid overheads that were introduced by being a safe language.

Correct, which is why I made the effort of pointing out that rustc is not smart enough to do it, not that it's impossible to do it.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by codeflo on Monday March 29, 2021 @05:43PM (#26628560)
This may be splitting hairs a bit, because we all agree that this is a good example where using Rust in this straightforward manner leads to suboptimal performance. But I agree with the grand parent that this is mainly an issue with safety, not with the type system itself.

To show why, consider two alternative languages.

“Weak Rust”: an equally safe Rust with a weaker type system. It might not distinguish & and &mut, but it would still need those checks, because you might use those shared references to break a data structure invariant. It would have to detect such unsafe usage at runtime and raise the equivalent of Java’s ConcurrentModificationException.

“Unsafe Rust”: a less safe Rust with an equally strong type system. It wouldn’t need to do those checks. In fact, that’s basically C++.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by adwn on Monday March 29, 2021 @02:03PM (#26625799)
Just use `UnsafeCell` instead of `RefCell` [1]: It has zero overhead, but you have to be sure that there's really no simultaneous write/write or read/write access – just like using raw pointers in C or C++.

[1] https://doc.rust-lang.org/beta/std/cell/struct.UnsafeCell.ht...

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @02:12PM (#26625927)
Yes, I'm not averse to using `unsafe`, but one has to justify it on a case-by-case basis. Eg if you're doing this in a library, then keep in mind that some users are very adamant about using unsafe-free crates, so you may prefer to take the hit.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by colejohnson66 on Monday March 29, 2021 @03:56PM (#26627363)
> then keep in mind that some users are very adamant about using unsafe-free crates

Couldn’t you just put the use of unsafe as a default and add a feature flag to force the safe (but slower) behavior. Then you get the best of both worlds: those who don’t care get performance for “free”, while those who care can force it when they want.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by est31 on Monday March 29, 2021 @04:50PM (#26627985)
If anything you'd have to go the opposite way: use safe by default and add the option to turn off runtime checks like bounds checks on slice access. Because when you write safe code, you tell the compiler about the invariants of your code, while with unsafe code, you keep them in your mind yourself. They might not even translate to any safe Rust constructs at all. E.g. if you pass a pointer in C, what is the recipient of the pointer supposed to do with it? Is the memory content initialized? Who is responsible for deallocation? On the other hand, if the compiler is told invariants in terms of safe code, it's easy to avoid any runtime checks for them.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @04:56PM (#26628055)
The users I was thinking of were more along the lines of people that run cargo-geiger etc, which just looks for "unsafe" in the source rather than anything dynamic based on selected features.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by gpm on Monday March 29, 2021 @01:27PM (#26625236)
Apart from rust not being smart enough to see what you're doing in this sort of situation, the access pattern you're trying to use would actually result in undefined behavior with &mut pointers (or I assume C restrict pointers) because of the aliasing guarantees. For example one optimization you could imagine the compiler actually doing would result in the following

   let mut x = String::new();
   
   let str1 = x; (store x in a local pointer, no one else is touching it because we have aliasing guarantees)
   let str2 = x; (store x in a local pointer, no one else is touching it because we have aliasing guarantees)
   
   for _ in 0.. 10 {
       str1.push_str("cb1,");
       str2.push_str("cb2,");
   }

   x = str1; (restore x to the original variable before our aliasing guarantee goes away)
   x = str2; (restore x to the original variable before our aliasing guarantee goes away)
And you just:

- Leaked str1

- Created an x that just says cb2 repeatedly instead of alternating between cb1 and cb2.

Obviously it's possible to fix this problem by having different guarantees on pointers (C's pointers, rust raw pointers), but it's not clear that the occasional overhead of some metadata tracking (refcell) isn't actually going to be more performant than the constant overhead of not having aliasing guarantees everywhere else. The most performant would be obviously having both, but as we've seen with C asking programmers to go around marking pointers as restrict is too much work for too little benefit.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @01:47PM (#26625551)
>the access pattern you're trying to use would actually result in undefined behavior with &mut pointers (or I assume C restrict pointers) [...] Obviously it's possible to fix this problem by having different guarantees on pointers (C's pointers, rust raw pointers)

Yes, I said as much in the last paragraph.

>but it's not clear that the occasional overhead of some metadata tracking (refcell) isn't actually going to be more performant than the constant overhead of not having aliasing guarantees everywhere else.

Generating panicking code where it's not needed is bad in general. It adds unwinding (unless disabled), collects backtraces (unavoidable), and often pulls in the std::fmt machinery.

Yes, in general it's almost certainly true that non-aliasing pointers produce more benefits regardless. My comment was in the context of the very specific example it gave.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by nicoburns on Monday March 29, 2021 @01:46PM (#26625526)
You could rewrite this as an iterator, which would avoid this problem and make the code much nicer.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Arnavion on Monday March 29, 2021 @01:48PM (#26625566)
The hypothetical `foo` is a third-party library function.

(The real code which I reduced to this example is https://github.com/Arnavion/k8s-openapi/blob/1fcfe4b34a1f4f1... , and the callee does happen to be another crate in my control. While this can't be reduced to something like an Iterator, it can be resolved by making the calle take a trait with two `&mut self` methods instead of taking two closures. That still requires changing the callee, of course.)

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Too on Monday March 29, 2021 @02:54PM (#26626563)
In c/c++, Marking every argument as const throughout a deep call chain to later find some edge case where you need to mutate one member far down the call stack, and where this would not have broken the top level contract of the function. Forcing you to do expensive copies instead.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by api on Monday March 29, 2021 @11:32AM (#26623278)
This is why I think Rust could eventually be faster than C and C++ for a lot of things. The work has to be done though. You're right that noalias enabled optimizations are neglected because you can rarely use them in C code.

On the Rust side I think the language needs some way to annotate if's as likely/unlikely. This doesn't matter in most cases but can occasionally matter a lot in tight high performance code. It can allow the compiler to emit code that is structured so as to cause the branch predictor to usually be right, which can have a large impact.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by steveklabnik on Monday March 29, 2021 @11:33AM (#26623293)
Re:&& operator chains (and ||, possibly) generates unoptimiz... by drran on Monday March 29, 2021 @01:08PM (#26624938)
Why not just use PGO (Profile Guided Optimizations)?

Sadly, PGO does not work with cross-language LTO, because of conflict of LLVM module name ('Profile').

Re:&& operator chains (and ||, possibly) generates unoptimiz... by gnulinux on Monday March 29, 2021 @11:34AM (#26623313)
I write compilers for fun (hobby) and I just transpile my IR data structure to C++ (I'm also experimenting with other targets like Haskell (similar to agda compiler) and Rust (work in progress)). My friends usually treat this approach "too amateur" and a "real language" should compile all the way to assembly. The reason I don't do that is if you transpile to a well-known language and then manage that compiler to go all the way to machine code, you get insane amount of optimizations for free. Like C++ compilers are so good, you rarely need think about low-level optimizations, as long as your program is asymptotically sound (i.e. you don't keep random inserting into an array) it gives pretty good performance regardless.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by ericbarrett on Monday March 29, 2021 @02:29PM (#26626183)
> My friends usually treat this approach "too amateur" and a "real language" should compile all the way to assembly.

Get new friends—no, seriously. I used to think like them, and hung out with similar minds. It is gatekeeping[0] in a way that, if internalized, will blind you to opportunity.

A few things I missed because I scoffed at them for not being "pure enough":

1) The entire Javascript ecosystem

2) Bitcoin, circa 2009

3) Countless SV startup opportunities from 2001-2015

4) ML and data science (e.g. the terrible tooling)

The success I have found always came with an open mind to people's approaches, even if they were not the ones I settled on. It took me way too long to learn this, but I hope I can change a few younger people's paths.

[0] https://www.urbandictionary.com/define.php?term=Gatekeeping

Re:&& operator chains (and ||, possibly) generates unoptimiz... by zokier on Monday March 29, 2021 @01:04PM (#26624881)
Nim compiler also generates C, so I'd say you are in pretty good company there.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Blikkentrekker on Monday March 29, 2021 @10:30PM (#26630727)
The Idris 2 compiler compiles to Chez Scheme; the Idris 1 compiler compiled to C, and the former actually produces significantly faster executables than the latter.

I sometimes see programmers have very strange, irrational purity misgivings a particular case was someone who did not wish to fork off `grep` for some task, but actually wrote his own implementation which broke input into lines and used and manually searched for substrings; — he was initially convinced that this would be faster, or was at least “cleaner” than simply forking off `grep`, and piping to it.

The reality is that modern `grep` implementations are so optimized that writing something that was as efficient would probably exceed the complexity of his entire project.

I have never understood why many programmers seem to have an irrational dislike against forking off POSIX utilities when they target such platforms, and piping through them, which are often far more optimized than anything they've ever written.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by dragonwriter on Wednesday March 31, 2021 @01:00PM (#26649795)
> I have never understood why many programmers seem to have an irrational dislike against forking off POSIX utilities when they target such platforms, and piping through them

Many programmers have trust issues with code, and find it easier to write and comprehend a minimally-functional, narrow-scope implementation of their own than to get to know a general purpose utility enough to trust it. Also, lots of programmers would rather spend time on the experiencia of hacking out their own version than hacking out an interface to someone else’s code.

(And, yes, there's a whole lot of illogic and inconsistency in how this tends to manifests. But I think that there are very understandable reasons why a tendency in this direction is not only associated with predisposition to become a programmer, but also, among programmers, with tendency to develop deeper and broader skill as a programmer.)

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Blikkentrekker on Thursday April 01, 2021 @05:25AM (#26658284)
If your explanation would be the genesis, then the same distrust would manifest when calling library functions, which does not seem to be the case.

The distrust seems to manifest from forking off a separate process invoked by it's name, not relying on externally written software. — it seems to be a distrust of forks and pipes.

I think what in many cases also plays is a fundamental misunderstanding of performance bottlenecks, with many programmers believing that forking off a program and piping to it is measurably slow, while in reality if the target program be well optimized it will be faster than a single heap allocation.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by caspar on Wednesday March 31, 2021 @08:27AM (#26646336)
One reason is that disparate impls of POSIX utils don't behave as similarly as one would hope. It's easy to cross the line from using flags that are guaranteed to be available to using flags and behaviors only available on your machine.

An example of a mistake I've made like this is relying on `find` on linux to default to searching the pwd if it doesn't have a positional arg. Another is `sed -i` requires a file extension on MacOS, but doesn't on Linux. You can catch these with tests to some extent, but how many people bother running their CI on MacOS just to avoid breaking other devs?

That said, I did work on a production system which happily shelled out to `dig` for DNS lookups for several years; everybody who saw it had a visceral negative reaction, but it also worked well enough that there was no good reason to spend time replacing it.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by Blikkentrekker on Wednesday March 31, 2021 @12:53PM (#26649670)
> One reason is that disparate impls of POSIX utils don't behave as similarly as one would hope. It's easy to cross the line from using flags that are guaranteed to be available to using flags and behaviors only available on your machine.

Certainly not, it's as easy as looking up the specification for anything else; what is and isn't POSIX is well documented.

> everybody who saw it had a visceral negative reaction

This is a reaction rooted in emotion, not reason.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by dragonwriter on Wednesday March 31, 2021 @01:01PM (#26649812)
> This is a reaction rooted in emotion, not reason.

Yes, humans are driven by emotion, not reason. Even when there is superficial rationality, it's mostly post hoc rationalization, not actual rationality.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by PoignardAzur on Monday March 29, 2021 @05:47PM (#26628632)
Not to be like your judgmental friends, but if you're going to use the approach that gives optimizations for free, why not just target WebAssembly / LLVM IR / Cranelift IR?
Re:&& operator chains (and ||, possibly) generates unoptimiz... by gnulinux on Monday March 29, 2021 @08:10PM (#26629900)
Because I don't know web assembly, llvm ir. I'm pretty experienced in C++ and Haskell and they have "good enough" performance for my toy projects, so why complicate things?

Besides you can compile C++ to webAssembly and llvm ir. (don't know about cranelift).

Re:&& operator chains (and ||, possibly) generates unoptimiz... by tom_mellior on Monday March 29, 2021 @06:38PM (#26629187)
On the other hand, why yes? The OP found something that works for them and seems to give them the level of optimization they want. Presumably they also know C++ well, but possibly none of the technologies you mention well enough to "just" target them.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Flow on Monday March 29, 2021 @12:12PM (#26624006)
But then you miss all the fun with doing a nanopass compiler.

Maybe that's not entirely true though, you can still generate C/C++ in the end I guess.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by nwallin on Monday March 29, 2021 @06:46PM (#26629258)
> Rust + LLVM will already handily beat a naive bare bones C or C++ compiler that isn't loaded with sophisticated optimization tricks.

Well - sure. LLVM is loaded with sophisticated optimization tricks. If one compiler does sophisticated optimization tricks and the other compiler doesn't do sophisticated optimization tricks, the compiler with the sophisticated optimization tricks will be faster.

Tangent: Ten years ago or so, LLVM/Clang was touted as being head and shoulders better than GCC, the big new thing, the bees knees. Some of how it was better was obvious to everyone- readable error messages are pretty awesome. (GCC stole that idea pretty quickly) But the big thing that the LLVM/Clang people talked about was how blazingly fast compilation was compared to GCC. It was normal to take 1/10th as long to compile something. The code didn't run as fast as the code generated by GCC, maybe 50% of the performance, but that was a problem that they would eventually fix with more sophisticated optimizers. But compilation was fast!

Here we are ten years later, and LLVM/Clang generates code that runs almost as quickly as GCC. What did it cost, besides ten years of incrementally making the optimizer more and more sophisticated, a little bit better one little bit at a time? Well, it takes just as long to compile something with LLVM's sophisticated optimizer as it does to compile something with GCC's sophisticated optimizer.

The point is, there's a lot of yak shaving that will have to go into making Rust+LLVM work together better. And LLVM is already well acquainted with the barber. The low hanging fruit you're looking for has already been plucked.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by throwaway894345 on Monday March 29, 2021 @07:18PM (#26629541)
It’s been a a bit since I was a C++ developer, but didn’t LLVM spur GCC on to improve significantly? Maybe LLVM and GCC are pretty comparable today with respect to build time and performance, but I think the more interesting question is how LLVM compares to GCC ten years ago (or more precisely, where GCC would be today were it not for competition from LLVM). Personally I’m glad there are multiple options, and people seem to prefer using LLVM for a language backend more than GCC for whatever reason, so it seems like a significant contribution to our digital society.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by nwallin on Wednesday March 31, 2021 @03:38AM (#26644474)
Hard to say.

In some places it's clear: LLVM's error messages were head and shoulders better than GCC's, and it was immediately obvious to everyone that GCC had to improve. And they're much better now.

But I don't believe GCC has made substantial improvements to its compilation speed since LLVM was introduced. In fact I believe it to be the opposite; as a Gentoo user I generally notice that compilation performance gets worse with every major GCC update. It's only due to hardware upgrades that compilation gets shorter.

LLVM is inherently much more modular than GCC is, which makes it a very attractive target for a language backend. It's a very large amount of work to shoehorn a language into GCC. The modular nature of LLVM is quite useful for lots of purposes, it is the back end for the syntax highlighting and error highlighting module I use in emacs. clang-format is a godsend for me, and unlike most other autoformatters, it formats based on semantics instead of syntax, which is a huge boon. The static analyzer and llvm-mca are also closely tied to the modularity of LLVM. It's not immediately obvious how one might implement these features based on GCC.

So yes, I 100% agree that LLVM is a hugely beneficial contribution to our digital society, even though it's not my first choice for a compiler.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by MaxBarraclough on Monday March 29, 2021 @11:04AM (#26622795)
I think Ada/GNAT performs roughly on par with C and C++, so we have reason to be optimistic. It's not just the dominant languages that end up with mature optimizing compilers.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by pjmlp on Monday March 29, 2021 @11:33AM (#26623286)
Having been there when C compilers used to generate lousy code and we had legends like Mike Abrash teaching an whole industry how to write high performance Assembly, it always feels ironic that there is this myth about C and C++ being blazing fast since they were created.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by mids_hn on Monday March 29, 2021 @11:47AM (#26623585)
C was fast.

On a PDP-11.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by anthk on Monday March 29, 2021 @01:17PM (#26625099)
C++ was always taken as big, bloated and unusable compared to C.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by pjmlp on Monday March 29, 2021 @02:21PM (#26626077)
Only by C developers that still believe C generates faster code than C++, while their beloved C compiler has been rewritten in C++.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by bcrl on Monday March 29, 2021 @07:49PM (#26629757)
That's not what I believe. C generates the code I expect, rather than the insanely bloated crap that comes out of C++. C++ obfuscates what is actually going on. Oh, and then there are all the problems with the C++ standard library. It's unusable in high performance embedded style code due to many aspects of the standard library being unconstrained - things like memory allocations and unspecified complexity. In some cases we were able to use boost, but in many cases we had to reimplement many algorithms where the implementation performed allocations at init time, and no allocs at runtime. But oh how does an event driven, multithreaded and hot running messaging system go fast...
Re:&& operator chains (and ||, possibly) generates unoptimiz... by pjmlp on Tuesday March 30, 2021 @02:54AM (#26631822)
Then you expect very little from your compilers, unless you are just targeting 8 and 16 bit CPUs on the embedded market.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by bcrl on Tuesday March 30, 2021 @08:54PM (#26642353)
This is on modern x86-64 utilizing many cores and processing millions of messages per second. Efficient, well thought out architectures work well on small systems as well as large.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by pjmlp on Wednesday March 31, 2021 @09:57AM (#26647355)
I bet that at -O3 it definitely does not generate the code you expect, and the same C code when compiled with a C++ compiler will generate even better machine code.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by bcrl on Wednesday March 31, 2021 @11:48AM (#26648760)
You would be wrong. I've spent plenty of time looking at code produced by the compiler from both C and C++ while working through performance profiling. Yes -O3 code can result in non-trivial transformations, but it's still easy enough to understand when one has been doing so for decades.

In my experience, it isn't the compiler that is the bottleneck to performance. Code can always be tweaked to get the compiler to produce output that does what is intended. My complaints about C++ are more due to the complete unsuitability of the standard library to embedded type applications caused us to spend plenty of time reimplementing algorithms that were already provided as part of normal C++ infrastructure. Having the right infrastructure to build a high performance application is far more than having an optimizing compiler. Libraries matter, kernel APIs matter, taking advantage of the right hardware configurations matters. The compiler is actually a fairly small part of the overall performance picture - doing things like pinning threads and avoiding cache line bounces between threads/CPUs buys orders of magnitude more performance than changing the compiler.

Re:&& operator chains (and ||, possibly) generates unoptimiz... by anthk on Monday March 29, 2021 @02:33PM (#26626231)
gcc is not my daily compiler.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by pjmlp on Monday March 29, 2021 @02:58PM (#26626635)
I found another tinyc user.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by mhh__ on Monday March 29, 2021 @01:00PM (#26624811)
I'm a little suspect of the "Language x is faster than language y" talk - it seems too prone to programmer culture to test scientifically, beyond being able to prove that you can or can't end up with the same machine code from multiple languages.
Re:&& operator chains (and ||, possibly) generates unoptimiz... by Sohcahtoa82 on Monday March 29, 2021 @04:12PM (#26627562)
And you can almost always write a program that executes faster in a "slower" language than a "faster" one.