News for hackers. Stuff that matters.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by ilamont on Sunday July 12, 2020 @11:30AM (#23812073)
I was involved in the indie music scene in the late 1980s and 1990s and recall similar systems to this - digital audio recorded on analog videocassettes.

IIRC, WBRS, the radio station at Brandeis University, used one such system to record live performances at the studio in two channels of digital audio starting in the late 1980s. I also worked with a studio in Taiwan in 1997 that used analog video cassettes to record 16 channels of digital audio, which were then mixed down to 2 channels and burned to a CD-ROM.

One of the limitations that we were very aware of at the time was being able to extract the audio from the tapes at a later date. No home users had gear that could play back the tapes, and it seemed that very few studios even had access to these specialized pieces of machinery.

In the early 1990s, I also worked in a 24-track London recording studio, which still used very thick analog tape for multitracking, but would output demos or test mixes to the then-emerging DAT standard (https://www.newworldencyclopedia.org/entry/Digital_Audio_Tap...).

Re:Digital Audio on VHS – The Technics SV-P100 [video] by Scoundreller on Sunday July 12, 2020 @11:40AM (#23812135)
Ahhh, DAT, the technology so good that the recording industry got congress to make it useless:

http://www.brouhaha.com/~eric/bad_laws/dat_tax.html

Re:Digital Audio on VHS – The Technics SV-P100 [video] by Zenst on Sunday July 12, 2020 @02:37PM (#23813607)
Ah yes, then the whole blank recordable media TAX on blank tapes, I remember that, then the whole storm over writable CD's.

https://en.wikipedia.org/wiki/Private_copying_levy

Re:Digital Audio on VHS – The Technics SV-P100 [video] by LeoPanthera on Sunday July 12, 2020 @01:38PM (#23813117)
And in fact TechMoan has done a DAT video, too. https://youtu.be/F4K1QKKPX_g
Re:Digital Audio on VHS – The Technics SV-P100 [video] by aardvark179 on Sunday July 12, 2020 @10:17AM (#23811432)
Digital audio storage on video predates this, and even VHS, by quite a long way. The whole reason we have the weird sample rate of CD audio is because it was one that could conveniently be stored and retrieved as a video signal in either PAL or NTSC.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by slashink on Sunday July 12, 2020 @10:37AM (#23811645)
Not the only reason. A combination of CD targeting a useable spectrum just above 20KHz (human hearing) which meant having more than double due to Shannon-Nyqvist ( https://en.m.wikipedia.org/wiki/Nyquist–Shannon_sampling_the... ). With the need of filter cutoff on the high end, 44000 was enough to avoid aliasing and still have a good useable spectrum.

The second part is finding a good sample rate that you can easily clock on VHS. That’s where the this stems from although they technically could have gone for a different sample rate at a lower bit depth. 44100 ended up being a good trade off between different requirements.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by aardvark179 on Sunday July 12, 2020 @11:02AM (#23811879)
Yeah. I was going to type more about the Shannon-Nyquist limit, but was on my phone, and I've heard several people over the years assert that the 44100 sample rate was a very early form of DRM since "anybody sensible" would have picked 48000, and indeed did for various other formats where this restriction didn't apply.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by chiph on Sunday July 12, 2020 @01:40PM (#23813133)
I bought a Sony CDP-101 in 1984 (their first commercial CD player). Unlike hifi components today that are mostly air and a small embedded processor, it was densely packed with circuitry and weighed a surprising amount (10kg? maybe more?). For cost and packaging reasons, Sony only put a single DA converter in it. This meant that they had to alternate converting the left + right channels, which introduced a 11µs delay between them. Not ideal, but it was what was what they were able to do given the technology of the time. Much like Technics was with the SV-P100.

Anyone saying the 44.1 kHz sampling rate was because of DRM [0] and that they should have used a more sensible rate like 48 kHz is just mistaken. DAT was the first commercial product to have 48 kHz sampling, and that wasn't available until 1987.

[0] The Red Book CD Digital Audio specification obviously existed and was available, otherwise other equipment makers couldn't create compatible players.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by slashink on Sunday July 12, 2020 @11:14AM (#23811971)
Yeah also you are technically right. The specific reason we ended up at 44100 is a VHS constraint but the 44* ballpark was what I wanted to clarify. Nevertheless always fun to see this pop up on HN, there is so much forgotten reasoning about standards that we’ve carried over into the modern world.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by segfaultbuserr on Sunday July 12, 2020 @01:48PM (#23813184)
> the 44100 sample rate was a very early form of DRM

Can you elaborate? How could it be a form of DRM? Did you mean that 44100 Hz was incompatible with existing designs using 48000 Hz, or that 44100 Hz created technical challenge for replication due to its smaller frequency margin?

Re:Digital Audio on VHS – The Technics SV-P100 [video] by garganzol on Sunday July 12, 2020 @03:08PM (#23813868)
44.1 kHz sample rate limits the audio frequency response to 22 kHz. The popular knowledge says that the human hearing "stops" at 20 kHz, but in reality this is not a flush cut off. It may go way beyond that: some people are able to hear up to 27 kHz, depending on age and personal physiology.

Limiting frequency response at 22 kHz ensures that you get a high quality material, but not the highest quality.

Record labels still have the leverage to extract some pennies in the future by selling a higher quality record and this makes them feel comfortable.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by klodolph on Sunday July 12, 2020 @03:27PM (#23814045)
I don’t find this argument particularly compelling. You can hear up to 27kHz if the sound is loud enough, under laboratory conditions. However, from a psychoacoustic standpoint, you are unlikely to be able to hear those frequencies under normal listening conditions, and typical program material doesn’t make use of those frequencies anyway.

In other words, 20 kHz is good enough.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by garganzol on Sunday July 12, 2020 @04:03PM (#23814306)
There is a bit of difference between 48 and 44.1 tracks, and it is a bit deeper than expected.

44.1 tracks tend to be "normalized" at the highest portion of the spectrum trying to squeeze the juice right at the studio.

Tracks mastered for 48+ kHz are usually more relaxed in this regard, they just let the sound flow.

Both sound exceptionally well, but tracks with higher sample rate sound a bit more natural, a bit softer if you prefer. Higher sample rate tends to add a pleasant edge to some kinds of music: live performances, jazz, minimal techno.

If you happen to live in a part of the world where crickets are active in the summer then take a closer look. Their audio spectrum goes way beyond 20 kHz and if you try to listen carefully then you may spot the point where it goes beyond 20 kHz limit.

Not everybody is physically capable to experience this. Personally I can hear a bit of those frequencies, so it's amusing to realize that a little bug can be such a masterful audio source. Nature is beautiful. And this beauty is a selling point when it comes to music.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by klodolph on Sunday July 12, 2020 @07:21PM (#23815572)
> 44.1 tracks tend to be "normalized" at the highest portion of the spectrum trying to squeeze the juice right at the studio.

Could you explain this to me? What does it mean to “normalize something at the highest portion of the spectrum”?

Assume I have a fairly solid background in signal processing theory and understand the fundamentals of music production / mixing / mastering.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by grawprog on Sunday July 12, 2020 @09:02PM (#23816119)
Not the original commenter, but my guess is, because the cutoff is 22khz, higher frequencies are normalized down around 20-22khz, blending them with those higher frequencies and distorting and changing them slightly.

Whereas being mastered for 27khz would allow some of those higher frequencies to remain as is and sound closer to the natural sound you'd hear.

I may be wrong but as far as I know, this is because those higher frequencies are still picked up and interpreted by us whether we actually hear them or not.

Personally, i've never really noticed the difference between 44.1kHz and 48kHz, but I do notice the difference between listening to audio on headphones with different cutoffs.

20-20000hz headphones sound noticably less good than 18-22000hz or even 24000hz. It makes even more of a difference than price point usually does. To the point where it's the only thing i really look for when looking for headphones for music.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by klodolph on Monday July 13, 2020 @12:17AM (#23817118)
> … because the cutoff is 22khz…

That’s the Nyquist frequency. The cutoff is wherever you like, but typically at 20kHz.

> …higher frequencies are normalized down around 20-22khz, blending them with those higher frequencies and distorting and changing them slightly.

Can you explain what you mean by “normalized down”? It sounds like you are describing some kind of processing done to music, something I have never heard of before, something different from aliasing.

I want to assume that you’re commenting in good faith, but are you just rewording the original comment? I don’t think the original comment makes sense, and rewording it isn’t going to change anything.

> I may be wrong but as far as I know, this is because those higher frequencies are still picked up and interpreted by us whether we actually hear them or not.

This is wrong, or at least wishful thinking—under ordinary listening conditions with typical program material, you simply can’t tell the difference between music which has those frequencies and music which doesn’t. That what experiments are testing when they test if you can “hear” something.

> Personally, i've never really noticed the difference between 44.1kHz and 48kHz, but I do notice the difference between listening to audio on headphones with different cutoffs.

Different headphones sound different, this is a known fact. There are simply too many differences between different headphones to draw conclusions here.

When I’m making music, I try to listen to it on several headphones before I release it. Each set of headphones I have imparts a unique sound on the music. Same thing applies to loudspeakers.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by ferongr on Sunday July 12, 2020 @06:21PM (#23815247)
Post your ABX logs.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by rasz on Monday July 13, 2020 @05:22AM (#23818812)
Makes perfect sense .. for a Bat.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by klodolph on Sunday July 12, 2020 @03:39PM (#23814148)
Here’s my understanding.

Let’s say you want to resample from 32kHz to 48kHz with a filter that has N taps. The sample rate ratio is 3:4, so you need 4N coefficients total. Basically, what you have is four N-tap filters, where filter K has a delay of K/4 samples. With higher values for N, you get lower ripple and lower aliasing.

Resampling 44.1kHz to 48kHz, the ratio is 147:160 so you need 160N coefficients. This wasn’t a problem for very long, but it was inconvenient in the 1980s.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by segfaultbuserr on Monday July 13, 2020 @03:24PM (#23824580)
Why did you need to resample it? Because 48 kHz was already the most common industry standard before CD, is it correct?
Re:Digital Audio on VHS – The Technics SV-P100 [video] by klodolph on Monday July 13, 2020 @11:36PM (#23828245)
That's the way the story goes. I can't really find supporting evidence, though. When I try looking at early digital media, it seems that it was fairly common for hardware to support both 44.1kHz and 48kHz, at the very least. Stuff like DASH, ProDigi, and DAT.

I think it's more likely that 44100 was chosen for other reasons--either because it a multiple of the number of active NTSC or PAL lines per second, or because it has a convenient factorization (14x14x15x15), or both.

44.1kHz is a great sample rate for distribution. 48kHz is a little more convenient for creating sounds because it often uses less CPU power to process 48kHz signals (because the transition band is twice as large).

Re:Digital Audio on VHS – The Technics SV-P100 [video] by rokweom on Sunday July 12, 2020 @10:40AM (#23811675)
Yes, he talks about it later in the video. What's interesting about this Technics is that it's fully integrated - no need for a separate PCM processor and VCR.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by TheOtherHobbes on Sunday July 12, 2020 @01:52PM (#23813215)
I think Sony's PCM-1600 was the first pro system, but there was a consumer PCM-1 and then a PCM-F1 before that in the late 70s.

I remember buying a vinyl LP that had been DIGITALLY MASTERED™ and expecting all kinds of magic, but in fact it sounded a bit thin and dead.

The early systems were 14-bit, and that's not quite good enough for smooth audio.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by RainforestCx on Sunday July 12, 2020 @10:31AM (#23811581)
So interesting! I’d always wondered about the history behind this. After your hint, there’s more info here: https://www.cardinalpeak.com/why-do-cds-use-a-sampling-rate-...
Re:Digital Audio on VHS – The Technics SV-P100 [video] by drmpeg on Sunday July 12, 2020 @09:51AM (#23811284)
Who remembers D-VHS? Digital video on VHS.

https://en.wikipedia.org/wiki/D-VHS

Re:Digital Audio on VHS – The Technics SV-P100 [video] by jccalhoun on Sunday July 12, 2020 @10:08AM (#23811376)
Of course Techmoan has done a video on it: https://youtu.be/jiu0LPeLQPE
Re:Digital Audio on VHS – The Technics SV-P100 [video] by drmpeg on Sunday July 12, 2020 @10:15AM (#23811420)
Cool. Thanks for the link. I developed the code for the IEEE1394 interface on the JVC 2nd generation decks (HM-DH40000U, HM-DH5U and HM-DT100U) when I was at LSI Logic.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by ThePowerOfFuet on Sunday July 12, 2020 @10:28AM (#23811550)
Username checks out.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by ethagnawl on Sunday July 12, 2020 @10:54AM (#23811817)
I only started watching this channel about six months ago, but have really been enjoying it. (I started supporting Techmoan on Patreon shortly thereafter.)

If you're interested in hi-fi, photography, new/classic/weird/historical technology, I'd recommend checking out the rest of Techmoan's catalog.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by jasonjayr on Sunday July 12, 2020 @12:54PM (#23812733)
"Technology Connections"[1] is another great channel with similar research + documentary on old technology, with amusing jokes thrown in.

[1] https://www.youtube.com/channel/UCy0tKL1T7wFoYcxCe0xjN6Q

Re:Digital Audio on VHS – The Technics SV-P100 [video] by ethagnawl on Monday July 13, 2020 @08:37AM (#23820079)
Can confirm. I don't remember which one I discovered first, but the YouTube you-may-also-like algorithm led me to the other.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by gregmac on Sunday July 12, 2020 @09:44AM (#23811245)
Seeing this brings back a vague recollection of touring a radio station -- I'm going to guess in the early 90s -- and seeing a bank of VHS machines they used to record everything they broadcast. I think I (or someone) asked about them, as it was weird to see video cassettes in a radio station, and so I'm fairly sure it was actually VHS and not DAT or something proprietary. It definitely didn't look like machine in this video. I don't remember what the radio station was anymore, but it's very possible it was a college station.

Was this a common thing, or am I just misremembering this? Maybe just a hack a college station would have done to use commodity hardware/tapes and get 6 hours of recording time per tape?

Re:Digital Audio on VHS – The Technics SV-P100 [video] by roywashere on Sunday July 12, 2020 @11:34AM (#23812092)
At my local radio station at the end of the 90s they used the longest length VHS tapes to record the shows on long play to 'prove' to the musicians rights organisation which songs were played how often. The choice of medium had not much to do with the audio quality but mostly with the length of the tapes.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by ljf on Sunday July 12, 2020 @01:36PM (#23813091)
I was going to post the same - I worked at a community station briefly in the 90s and they used a standard home VHS recorder that had audio (and video) component in on the front. A 4 hour tape and long play mode you could cover 24 hours with just 3 tapes. It was all a bit diy and remembering to change the tape if it fell in my show was pretty stressful, at least for a 17 year old.

I also understood that it was a term of our (short) license that we had proof of what was said in air, should anyone make a complaint etc. since all our shows were played live.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by zbuf on Sunday July 12, 2020 @03:58PM (#23814274)
Yeah this was hugely common in the UK, as you could fit 8 hours of Nicam digital stereo on a VHS tape at long play, for your license obligations. And as a bonus the security cameras as well if you need it. All using readily available consumer gear with built-in timer. It would wear out every year or so. Some stations used the same VHS trick as a play out system to cover overnights as well.

I recall one of the problems is the fire hazard of keeping 8 weeks or so of tapes.

Re:Digital Audio on VHS – The Technics SV-P100 [video] by MrRadar on Sunday July 12, 2020 @10:20AM (#23811467)
They were probably VHS HiFi decks used to record the day's broadcast so that they could prove to advertisers when/how often their ads played in case they were asked. You could fit up to 8 hours on a VHS tape in the slowest speed mode with extended-length tapes.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by jccalhoun on Sunday July 12, 2020 @10:07AM (#23811369)
There was definitely a phase where individuals would record music to vhs - as Techmoan mentions towards the end, some vcrs could record quite good quality audio -- but I don't know if it was done by radio stations or just individuals.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by extra88 on Sunday July 12, 2020 @10:54AM (#23811814)
Around 1990, a classmate made a “mixtape” on VHS to play at a party for hours of continuous music that no one had to stop or mess with.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by DaiPlusPlus on Sunday July 12, 2020 @09:52AM (#23811290)
VHS could store gigabytes on a typical tape, so it’s a good media for storing a day’s worth of audio output from a radio station.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by dsr_ on Sunday July 12, 2020 @09:50AM (#23811282)
Reminds me of

https://en.wikipedia.org/wiki/ArVid

(Data storage on VHS)

Re:Digital Audio on VHS – The Technics SV-P100 [video] by bluedino on Sunday July 12, 2020 @10:08AM (#23811379)
Video showing how it worked from LGR:

https://m.youtube.com/watch?v=TUS0Zv2APjU

Re:Digital Audio on VHS – The Technics SV-P100 [video] by Wistar on Sunday July 12, 2020 @11:57AM (#23812272)
In 1983 or so, the studio I worked at had an Alpha Micro system with a VHS for data backup. I remember you could set the CRC, the cyclic redundancy check level, but don't remember much else other then it was pretty darn creaky although the Alpha Micro itself was great.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by jeffbee on Sunday July 12, 2020 @03:07PM (#23813856)
VHS is a great analog tape format, too. S-VHS HiFi audio recording rivals reel-to-reel multitrack tape quality (i.e. close to objective CD quality). Only problem is the tape life is terrible.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by JohnTHaller on Sunday July 12, 2020 @09:22AM (#23811129)
Watched this yesterday having no idea that this existed. It predates DAT and CD and looks like a device from the future for when it was released.
Re:Digital Audio on VHS – The Technics SV-P100 [video] by tibbon on Sunday July 12, 2020 @10:31AM (#23811572)
ADAT was pretty similar to this right, but later?
Re:Digital Audio on VHS – The Technics SV-P100 [video] by wazoox on Sunday July 12, 2020 @11:00AM (#23811861)
ADAT was 8 tracks of digital audio on a S-VHS. It was actually quite different from this because it was definitely targeted to home-studios, and it didn't use any video encoding, it was digital from end to end (and 15 years later).