News for hackers. Stuff that matters.
Re:Making My Own Glasses by emptybits on Friday October 04, 2019 @08:21AM (#21156866)
Fascinating hacker story in an unexpected domain. Thank you!

A side note about "getting your numbers"... The author remarks, "she’s not happy to share the measurements with me as she fears I’ll run off and get my glasses made online".

This will obviously vary by jurisdiction but what the author describes may be illegal in some places. e.g. where I live, there is a law since 2010 requiring opticians and optometrists "to give clients, free of charge, a copy of their prescription, sight-test assessment or contact-lens specifications — whether or not it is requested by the client — and also to give a copy, free of charge, to a third-party eyewear seller or other person if requested by the client"[1]

[1] https://www.cbc.ca/news/canada/british-columbia/b-c-changes-...

Re:Making My Own Glasses by djhworld on Friday October 04, 2019 @09:07AM (#21157230)
Not sure about legality but here in the UK you will find opticians will give you your prescription, but often exclude the pupil distance measurement (I think) which a lot of the online stores require.

I think you can ask for it, but they will only give it begrudgingly.

Re:Making My Own Glasses by astura on Friday October 04, 2019 @12:50PM (#21159498)
That's cause PD is measured by the optician separately when you're ordering your glasses, not by the optometrist or opthalmologist who writes the prescription.

In other words, it's not part of the prescription, it's instead part of the glasses fitting process.

A non-eye related example would be if your doctor prescribed you a brace and the person at the medical supply store measured you to find out which size you need.

Re:Making My Own Glasses by JoeAltmaier on Friday October 04, 2019 @12:54PM (#21159524)
...and can be measured at home using a ruler and a mirror, pretty simply. Close one eye, align the ruler at 0 under that pupil. Open the other eye, close the first, read off the distance to the 2nd pupil.
Re:Making My Own Glasses by nsxwolf on Friday October 04, 2019 @01:04PM (#21159634)
Did this for my wife recently. We measured multiple times very carefully, and got it very wrong.
Re:Making My Own Glasses by andai on Friday October 04, 2019 @04:11PM (#21161454)
Did it for myself. Ordered online. Best glasses yet (I think mainly thanks to a my very patient optometrist.)

I measured by taking a picture of my face with a credit card for reference and measuring the pixels with the measuring tool in GIMP. (These were the actual instructions on the website I ordered my glasses from.)

Also worth mentioning I paid $40 ordering them online, in the article it says he paid $280!

Re:Making My Own Glasses by nicolapede on Friday October 04, 2019 @05:46PM (#21162175)
May I ask you where you ordered them?
Re:Making My Own Glasses by andai on Friday October 04, 2019 @06:01PM (#21162286)
Edit: Just found out they ship worldwide for €3.

https://www.glasses24.com/customer-support/shipping-and-deli...

I was amazed because until a friend told me about this site, I've been paying hundreds of euros just for the frames! At such a low cost, I could even order slight variations on the strength.

They have a lot of options for better lens material, have it darken in sunlight, anti glare coating etc, but I just got the cheapest one and it was fine.

Re:Making My Own Glasses by Johnny555 on Friday October 04, 2019 @08:59PM (#21163156)
I found that it's easier to do it yourself than have someone else do it -- my wife and I measured mine, hers was off from mine by 6mm (2mm on one side, 4mm on the other, I have no idea how she was nearly half a centimeter off, maybe my eye moved), I ended up going to an optician a few months later, and my measurement was exactly the same as what they measured with some device.
Re:Making My Own Glasses by JoeAltmaier on Saturday October 05, 2019 @05:08AM (#21164516)
Don't see how you can possibly do it for anyone else, using the mirror method, without getting it very wrong.
Re:Making My Own Glasses by twothamendment on Friday October 04, 2019 @10:26PM (#21163462)
Another way is to look through binoculars, get them adjusted just right and then measure them. Don't try to measure center to center. Assuming the eye cups are the same measure from one side to the other (left edge of one to left edge of the other).
Re:Making My Own Glasses by hathawsh on Friday October 04, 2019 @03:27PM (#21161046)
I measured my kids using just a ruler and they're all happy with the results. I also measured myself using a mirror, ruler, and a phone camera (so the measurement couldn't be skewed by eye movement) and my results also turned out great. However, I can understand why it would be easy to measure incorrectly, since the ruler is never very close to the eyes.
Re:Making My Own Glasses by tremendo on Friday October 04, 2019 @06:01PM (#21162281)
I have done this a few times, and got inconsistent results. Distance to mirror, or camera to face, positioning of the ruler, they all seem to induce variability. Once I got a reproducible result and went with that, ordered progressive glasses online and they were… off. On another occasion I got PD (and prescription) numbers from optometrist at Visionworks, then took numbers and ordered from Zenni, and they were… off again. Also this PD number again different from the one I had measured myself. But when ordering directly at the store they were perfect. I even wondered whether they actually gave me the wrong PD number, to "teach" me a lesson not to go order elsewhere. Sigh.
Re:Making My Own Glasses by boptom on Friday October 04, 2019 @08:26PM (#21163028)
Progressive lenses need much more accuracy to be fitted correctly. This means a mono-PD (separate PD for each eye, not just the distance PD halved) and also a height, usually from "datum" measured for each eye too. This measurement would be different depending on the frame and how it sits/adjusted to your face.

This means the frame must be chosen and fitted to you before any of these are measured.

It becomes a 2D measurement.

There is a lot more to it (vertex distance, pantoscopic tilt etc) but the above is the absolute minimum.

Re:Making My Own Glasses by e12e on Friday October 04, 2019 @04:21PM (#21161549)
Maybe use a mirror, ruler and a camera?

Ed: i see @andai made a similar comment.

Might indeed be better to use a "long" object to indicate pixel length by division (credit card is 5432 px = 5 cm) rather than going by a ruler which might typically only be accurate to 0.5mm at best anyway.

Re:Making My Own Glasses by stjohnswarts on Friday October 04, 2019 @11:39PM (#21163669)
There's no reason for them to not give it, as it's an easy item to address.
Re:Making My Own Glasses by cptskippy on Friday October 04, 2019 @10:09AM (#21157842)
In the US, the person who takes your pupil distance (PD) usually isn't the person who writes your prescription. One is a doctor and the other a technician.

When you go to an optician, the doctor takes you in the back and determines your prescription. Then you go out front to the showroom and pick out your frames. There is usually a technician out there who will take the PD measurement and combine it with the prescription, and frame and lens selection to make your order. The technician is also the person who fits you with the new glasses when they arrive.

Re:Making My Own Glasses by kshacker on Friday October 04, 2019 @11:42AM (#21158746)
I recently (in US) asked for it, and was given a hand written sticky, begrudgingly after asking why you need it. But once asked again, no further objection.
Re:Making My Own Glasses by kube-system on Friday October 04, 2019 @11:46AM (#21158796)
Your PD isn’t part of the prescription. But the prescription itself must be provided to you by law in the US.
Re:Making My Own Glasses by fitzroy on Friday October 04, 2019 @12:49PM (#21159493)
For anyone near a Warby Parker, they'll happily measure your PD in about 30 seconds. Measurements can vary slightly so you might want to do it a few times and average them.
Re:Making My Own Glasses by carbocation on Friday October 04, 2019 @02:38PM (#21160567)
You can also do it online with Warby Parker as long as you have a credit card (to hold under your face; not to pay with).
Re:Making My Own Glasses by DesiLurker on Friday October 04, 2019 @08:59PM (#21163154)
do they also need the picture of the backside and home zipcode?

if not, sounds like a startup idea.

Re:Making My Own Glasses by pkaye on Friday October 04, 2019 @06:11PM (#21162340)
Now that is a clever way of doing it!
Re:Making My Own Glasses by tacon on Friday October 04, 2019 @03:14PM (#21160927)
The PD also varies a bit from reading glasses to distance glasses. If you are ordering single vision glasses, you might want to collect both numbers.
Re:Making My Own Glasses by breakbread on Sunday October 06, 2019 @12:07AM (#21169766)
Weird. I’m in Mississippi, of all places, and, without asking, my optometrist always sends me off with a printout containing my prescription and PD.
Re:Making My Own Glasses by FPGAhacker on Friday October 04, 2019 @09:46AM (#21157590)
Inter-pupillary distance is among the few things glasses related that can be measured yourself.
Re:Making My Own Glasses by jfengel on Friday October 04, 2019 @12:18PM (#21159138)
That may take some practice. I did it myself once, and was off by about 4 mm. The resulting glasses were incredibly painful. My eyes would try to look in two slightly different directions, and my brain would put the wrong 3D picture together. Whenever I moved my head my eyes would readjust, which took a noticeable period of time, and I could literally feel my non-dominant eye turning itself to find the focus. I chucked the glasses after a few days.

I'm sure it could be done better, but boy, that was an interesting experience I hope to never repeat.

Re:Making My Own Glasses by davinic on Friday October 04, 2019 @12:36PM (#21159345)
When I bought online from Zenni optical they sent a plastic ruler that you set on the bridge of your nose with a slot in the middle, and can be used to measure PD. It's similar to this: https://store.eyeque.com/eyeque-pd-ruler.html
Re:Making My Own Glasses by jfengel on Friday October 04, 2019 @02:11PM (#21160309)
Thanks for the tip. That would be way easier than doing it with a plastic school ruler.
Re:Making My Own Glasses by vanattab on Friday October 04, 2019 @09:54AM (#21157689)
It's a little hard to measure it by yourself but with a friend it's easy. Just make sure your looking far off into the distance and not at the persons face who is taking the measurement.
Re:Making My Own Glasses by JiBB on Friday October 04, 2019 @04:12PM (#21161461)
I found that the best way to get a nice, precise measurement was to take two pieces of sticky note and punch a hole in them with a pin. Put them on an existing pair of glasses and line up a distant (unless you're getting reading glasses) sharp corner with the pinhole over one eye. Switch to the other eye and see if the pinhole is lined up—if not, adjust the pinhole positioning and try again. Once the pinholes are aligned, you can measure the distance between them.

Much easier than trying to get someone to measure it accurately with a ruler in front of your face, or trying to draw dots with a washable pen in front of your eyes on old glasses, or any of the other methods I tried. The measurement I took appears to be accurate (the glasses I ordered from Zenni using it are comfortable to wear), and it was easy to get a precise and repeatable measurement to within about half a millimeter.

Re:Making My Own Glasses by tonyarkles on Friday October 04, 2019 @09:58AM (#21157732)
I encountered this in Canada, with an explanation given to me that there was a lawsuit at some point where an optometrist was sued after a client ordered glasses elsewhere based on the provided IPD and got glasses that caused headaches or something like that.

From Wikipedia[1]:

> In both the UK and most of Canada (excluding British Columbia[5]), the PD measurement is classed as a dispensing tool rather than a part of the actual prescription of the person whose eyes were tested, thus there is no obligation for a PD to be provided on patient request.

[1] https://en.wikipedia.org/wiki/Pupillary_distance

Re:Making My Own Glasses by diroussel on Friday October 04, 2019 @10:58AM (#21158341)
As part of GDPR you can request a copy of any personal data. In the UK this is governed by the ICO, and it’s called Right of Access.

https://ico.org.uk/for-organisations/guide-to-data-protectio...

Re:Making My Own Glasses by astura on Friday October 04, 2019 @01:27PM (#21159877)
You get your PD measured at the time you order your glasses. If you never order glasses they'll never measure your PD.
Re:Making My Own Glasses by icebraining on Friday October 04, 2019 @11:57AM (#21158903)
Are you assuming they keep records on the PD measurements of clients who didn't actually purchase glasses there? At least at the opticians I've used, I don't think they do.
Re:Making My Own Glasses by wonderwonder on Friday October 04, 2019 @08:56AM (#21157137)
This did strike me as strange. Imagine going to a doctor getting a blood test and being told your numbers are good or bad but the doctor refusing to give you the actual result. They are your results, you paid for them and are part of an overall need to understand your health.
Re:Making My Own Glasses by LoSboccacc on Friday October 04, 2019 @09:07AM (#21157231)
> you paid for them

most places that sell glasses do those for free tho. I agree they should be given out and they do in europe, or at least in the two states I lived, but being paid for is not the angle to come at it from

Re:Making My Own Glasses by mikepurvis on Friday October 04, 2019 @12:04PM (#21158975)
I don't think I've ever had a free exam in Ontario— my insurance covers one (up to like $200 or something) every two years, so that's about the cadence I get them on.

So it's a paid-for thing; I don't feel bad about taking the prescription and buying glasses online. That said, the glasses from the shop last way, way longer than the online ones, so I really just use online for sunglasses or like to get novelty frames for a costume or something.

Re:Making My Own Glasses by jblakey on Friday October 04, 2019 @02:31PM (#21160489)
I'm in Ontario, too, and couldn't get my PD from Laurier Optical. So I left, went on Amazon, and bought a PD Distance Measurer for a couple of hundred bucks. Did my whole family, and now my wife feels better about ordering from Zeni. Saved enough on a single pair of glasses to pay for the meter.
Re:Making My Own Glasses by cptskippy on Friday October 04, 2019 @10:13AM (#21157888)
"Free" exams aren't free, the cost is included in the frames purchase. You can pay for an eye exam and walk out with a prescription, you just have to explain your intent.
Re:Making My Own Glasses by mantoto on Friday October 04, 2019 @12:04PM (#21158976)
Not always. My place doesn't do it.
Re:Making My Own Glasses by cptskippy on Friday October 04, 2019 @12:47PM (#21159471)
Doesn't do what?
Re:Making My Own Glasses by rozab on Friday October 04, 2019 @01:20PM (#21159802)
I don't know about the US (I thought HIPAA was very comprehensive...?) but in the UK you are legally entitled to view personal data about yourself. It wouldn't matter if you paid for the test or not, if it's on file you should be able to access it.
Re:Making My Own Glasses by Johnny555 on Friday October 04, 2019 @09:05PM (#21163171)
I think a more apt analogy is that the doctor gave you your blood test results (just as they'll give you your prescription without the PD), but refused to characterize the color "A deep shade of crimson with a touch of scarlet", which is something that you can do yourself with a little knowledge.

So you're still getting the information that requires special training or licensing, and you can get the other information yourself if you really want it.

Re:Making My Own Glasses by ThePadawan on Friday October 04, 2019 @09:29AM (#21157425)
I actually read up on the local legalese around this (for Switzerland), and it turns out that doctors can refuse to share information with the patient if they consider it unhelpful/dangerous to do so, but have to share it with other medical staff should they request it.

Especially in the context of psychotherapy or when using placebos, this makes a lot of sense.

Re:Making My Own Glasses by stevekemp on Friday October 04, 2019 @01:46PM (#21160076)
I found it fascinating, after moving to Finland and having an MRI scan done, that it was possible to order a copy of the results on CD-ROM posted to my house.

Having worked in the medical field in the past exploring a DICOM dataset was no challenge, and the end result is I have a rotating 3D-view of my own brain! (Well just blood vessels, but still ..)

Re:Making My Own Glasses by rconti on Friday October 04, 2019 @04:57PM (#21161818)
Here in the US, I got an MRI at a 3rd party lab (not a hospital), and they gave me a copy on CD-ROM as I walked out. I didn't even have to ask! I was quite surprised, as I assumed the results would just be shared with my doctor electronically. I have no idea if I would have gotten this same treatment if I had paid 10x as much for the MRI at Stanford Hospital. (I'm guessing not).
Re:Making My Own Glasses by mastre_ on Saturday October 05, 2019 @02:15AM (#21164091)
You do. We got MRIs on disc at UCLA Santa Monica, free of charge. It's pretty standard.
Re:Making My Own Glasses by WA on Friday October 04, 2019 @09:08AM (#21157236)
Right, except that the test at a optician is often free (in Germany at least).
Re:Making My Own Glasses by criddell on Friday October 04, 2019 @09:54AM (#21157694)
A couple of years ago I had my vision test done (in Texas) and at the end I asked for my prescription. The PD measurement wasn't on there so I asked for it and was told that is measurement is taken when I buy glasses. I offered the person $20 to just do the measurement and give me the number and they wouldn't do it.
Re:Making My Own Glasses by mantoto on Friday October 04, 2019 @12:05PM (#21158980)
If you go to an eye doctor they will give it to you. At least in German
Re:Making My Own Glasses by ksaj on Friday October 04, 2019 @10:18PM (#21163440)
I was going to pipe in and say the same thing. I'm a few provinces east of you.

I've heard the same thing about hearing aid prescriptions, CT (and similar) scans, and blood test results. In Canada they'll happily give you the results for your own records, but apparently some other countries don't provide it as a general right, leaving businesses to decide whether they want their competitors to be able to pick up work they initiated.

I think the difference is whether medical is private or public.

Re:Making My Own Glasses by mister_hn on Friday October 04, 2019 @01:52PM (#21160151)
In Italy I've got the measurements since 30 years and counting.

I imagine the healthcare system plays against you in your country

Re:Making My Own Glasses by timbit42 on Saturday October 05, 2019 @10:15AM (#21165614)
The optometrist at my local Vogue Optical is actually only affiliated by location. She was happy to give me my PD as she doesn't sell glasses anyway. I'm sure most people walk out of her office into the Vogue Optical show floor and buy their glasses there.
Re:Making My Own Glasses by pkaye on Friday October 04, 2019 @06:03PM (#21162294)
Re:Making My Own Glasses by iak8god on Friday October 04, 2019 @06:12PM (#21162351)
That may be, but for glasses at least a key measurement is pupillary distance, and it is like pulling teeth to get them to give you this. At my most recent encounter with an optometrist - where I had already selected and was in the process of purchasing from them glasses that cost me hundreds of dollars after my insurance discount - I had to ask them no less then four times to write down my PD so I could buy a few pairs of beaters online. They kept "forgetting."
Re:Making My Own Glasses by pkaye on Friday October 04, 2019 @06:21PM (#21162412)
I presume the PD doesn't change after you are an adult so you could reuse it in the future.

My real concern is if I encounter some problems, if I got the exam and glasses from one place, I can insist they fix it for me instead of arguing who is at fault.

Re:Making My Own Glasses by ubermonkey on Friday October 04, 2019 @10:58AM (#21158336)
I'd treat a refusal to share the prescription as a dealbreaker. I've never encountered it at all. I'm sure it DOES happen, but if you're very clear about your expectations you can keep them from playing this card.
Re:Making My Own Glasses by stereo on Friday October 04, 2019 @10:34AM (#21158112)
In the EU, a GDPR data subject request will get you all the data you want.
Re:Making My Own Glasses by diroussel on Friday October 04, 2019 @11:01AM (#21158367)
Correct. And in the UK (maybe in other countries too) you can make a request verbally or in writing. So if they write it down; your allowed a copy.