A cat door that can tell if the cat has a mouse it's going to "gift" to you, and locks to keep the cat out.
I loved reading what you are doing with the Pi though.
Since last week I'm in contact with the manufacturer of the door drive tough because they maybe want to create a product out of it. To be honest I think it would pure marketing and at the moment it is very unlikely to ever hit the market.
Unless your cat door goes to market. May luck be on your side :)
(really, don't underestimate niches, you can probably find plenty of places to sell this sort of product...)
Maybe a bit off-topic but: The only thing that differs an "fire-protection approved" door drive from a non approved drive is that the drive is not allowed to have an option to keep the door open. Also in case of power outage (or fire) the door needs to close without power.
I look at it this way: If you want a remote device that measures or controls just one or two things, but does very little if any calculations - use a esp8366/32 (or anything with low power requirements). If you need to process data (video stream), or do other calculations, potentially while controlling many different sensors/things - you'll likely want a raspberrpi/similar
If you can come up with a reasonably secure way to get an ESP8862 to unlock your door that I can't sniff from across the street with a pringles can hooked up to a wifi dongle running in promiscuous mode (perhaps with a pile of off board AWS to crack your WPA key), I'd be interested in checking it out.
I'm not saying it can't be done. But for _me_, I'd prefer to piggy back on all the battle tested tools available in linux like OpenSSL rather that pretend I can write bulletproof crypto code for the constrained resources available on the esp. And I'd prefer to run my unlock signals over wires rather than over a radio. I'm cautious like that.
There's definitely something to be said for not having the surface area of some hobbiest-grade linux distro on your door locks also. I'd like to perform a "security update" on my door locks just about never.
Anyway, the esp32 has a tls stack which is adequate if you want to go that way. Lately there are a handful of boards on the market that pair the esp32 with a PoE chip that are becoming my goto for little "iot" projects.
Obligatory xkcd:
So I'd go with something like an Adafruit ESP32 Feather [0]. Sure it's super impressive that one can pick up a perfectly functional anonymous board on eBay for almost nothing but, for getting started, $20 for something from Adafruit will save you a lot of initial hassle.
MicroPython on ESP32 [1]. MicroPython specifically on the Adafruit ESP32 Feather [2].
[0] https://learn.adafruit.com/adafruit-huzzah32-esp32-feather?v... [1] https://docs.micropython.org/en/latest/esp32/tutorial/intro.... [2] https://github.com/pvanallen/esp32-getstarted
This is a link to the exact one I bought since you asked: https://www.ebay.com.au/itm/283082902927 (not actually branded TTGO, it's a clone)
Why you might like it:
- it has an OLED screen on the board for debugging and status output
- it has a battery holder and charging circuitry for an 18650 on the back of the board for portable powering/"UPS"
- it breaks out all the GPIO lines onto pins
Why you might not like it:
- like many esp32 dev boards it's slightly too fat to go straight into a standard breadboard. You have to join two breadboards to get access to both rows of pins.
[0] https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-sou...
I will open source everything once I'm happy with the security and the ability to configure it.
So I installed a fire-protecion-approved door drive that is hooked to a raspberry pi. Another raspberry pi then analyzes a video stream and detects my cat. If my cat is in the frame for n amount of time, a message is sent to the pi conntected to the door drive and the door opens up slightly for him to get in.