Short version: I made many attempts to track it down. Used low frequency Microphones, filters, amplifiers, etc, as well as PC Spectrogram programs to try and and visualise and record it. Visited many nearby industries etc to try and find it. But none of my attempts did any good.
As I'm a Radio Engineer I spent ages experimenting with VLF Receivers, Spectrum Analysers, etc.
One thing I noticed however was that the Hum was much worse when I was living in a quiet rural area.
One night however, I noticed that I could affect the hum by doing the swallow maneuver that divers use to equalise ear pressure. I slowly came to understand that my Hum was an internally generated sound.
Apparently there are various possible mechanisms: The simplest is blood flow near the ear. But also the tiny hairs in the ear canal actually have tiny muscles which cause feed-back or "regeneration" to make our ears more sensitive, and the frequency response of each hair cell much sharper. However at times, this regeneration can slip over into actual Oscillation.
This ability of the ear to actually generate sounds is well documented. It can actually be loud enough for a Doctor or a partner to hear. It's called Objective tinnitus.
In my case, the Hum eventually disappeared and has never returned. I suspect that it coincided with a change in blood pressure medication, but I can't be sure.
Looking back, I would suggest that it may be worth trying to amplify the sounds via a set of high-quality earphones and appropriate filters, etc, using the headphones as microphones.
'In 1951, Cage visited the anechoic chamber at Harvard University. An anechoic chamber is a room designed in such a way that the walls, ceiling and floor absorb all sounds made in the room, rather than reflecting them as echoes. Such a chamber is also externally sound-proofed. Cage entered the chamber expecting to hear silence, but he wrote later, "I heard two sounds, one high and one low. When I described them to the engineer in charge, he informed me that the high one was my nervous system in operation, the low one my blood in circulation." Cage had gone to a place where he expected total silence, and yet heard sound. "Until I die there will be sounds. And they will continue following my death. One need not fear about the future of music." The realization as he saw it of the impossibility of silence led to the composition of 4′33″.'
I'd like to experience that sometime, like, true silence. Have to say that my current house is very quiet (especially compared to my previous one), but there's still some background noise from outside, neighbours, the ventilation, etc. Should get a decibel meter sometime.
Anyway yes, sensory deprivation is weird.
Surely you asked other people if they also heard a hum? If they said no, what made you not focus on the ear right from the beginning?
In my case I'm single, so the question is moot.
But whatever, it is still possible that your partner also is a Hum sufferer.
You have an unrealistic expectation of Reddit. A subreddit is not an information dump for people who want to learn about a topic (for that you should look to the sidebar, or FAQ, or Wikipedia).
Its a community of people who are interested in a topic (and trolls... so many trolls) sorted by the most recent things they were talking about and whether the community wanted to talk about it. Communities don't constantly post and upvote introductory stuff in case new people happen by, but they are often responsive to questions from new people
Think of it like a clubhouse that you walked into. Right now you are standing at the bar trying to listen in on random conversations around you and saying "none of these people are talking about what I want to know in terms I can understand, some of them are even talking about whether they like the clubhouse's new decorations! WTF!".
Instead you should try joining into one of the conversations, or looking for a sign that says "new people come over here".
It's used all over the internet, and it's, by turns, a passive aggressive posture. Some acquiesce, and others enforce. The rest abandon. Linux follows a similar pattern with RTFM.
The Linux community process, as an example, has graduated to exclusion through sheer volume, with shrugs all around, as if to say the world really is just that complicated. But it's not. Inertia makes the situation more complicated than things need to be, and that disorganization (which was originally a product of the "everything is a file/lots of tiny, specialized executable programs" philosophy started with UNIX, leaves everyone blameless and) offers advantages to what I've come to refer to as trivia sherpas, who understand the seniority they've accumulated, and wish to keep things that way.
It often doesn't start as anything malicious, and some of it really is incidental, but that it stays that way is no accident. Sort of like the petroleum and automobile industry dynamic. Neither was an ideal solution for the problems they solve, but once circumstances snowballed in a certain direction, we all got stuck with these elephants in the room. Is it possible to uproot and improve the situation? I wonder...
>A subreddit for those who can control their Tensor Tympani muscle. http://en.wikipedia.org/wiki/Tensor_tympani_muscle#Voluntary...
I think it's pretty self-explanatory.
It depends a lot on the subreddit (they're essentially different websites), and of course the people. You can often find the great Walter Bright himself answering questions on D, for instance - https://www.reddit.com/user/WalterBright
Go look at like, www.reddit.com/r/gaming instead. The vast majority of reddit is not "wtf" moments.
Alternatively, it could be a resonance mode between infrasound stimuli and tension/relaxation of the tensor tympani. Eg. Pressure pulse -> TT reflex -> neural reflex drops as sound is blocked by TT -> repeat.
Total speculation, but this would explain the person-dependent experience, as well as the inefficacy of earplugs, sound dampening, etc.
Oh weird, I always assumed that was something that people could just do. It never occurred to me that there would be any particular variance in it. Oddly enough, it seems a little easier to do if I close my eyes.
I'm not sure what exactly im doing, but it feels like im contracting some muscle inside my head near the temples.
Is this normal and could this be something similar?
When you do it, you can hear a low humming, but also sounds through your mouth. Maybe this is what you mean?
It's clearer if you're wearing for example hearing protection, and open your mouth and the paths.
I'm putting a mic on the back of my head to pull the room then stereo directional mics out front to actively noise cancel the room but not the person I'm looking at in a cone that I can fiddle with. Initial tests seem to work! I'm trying to improve it with a crossover for low frequency on the jaw just under my earlobes and a mid/high driver on my temple. I think even a commercial setup for bike riders and some experimentation you might be able to find some relief. I've found them to be lacking in lower frequency which is why I'm using stronger drivers and the below the ear positioning.
Might be something to try playing with. It's pretty inexpensive. I'm using "Surface Transducers" from Adafruit and an STM32F4 Discovery board to process the noise canceling (has great FFT libs). All in my current setup is maybe $150 with a couple iterations under my belt.
What drivers are you using?
What is the grinder community? I assume not the gay dating app, I don't think that has a scene for cyberpunk body mod, but I could be wrong.
I linked to the drivers in another comment below. I think I can find better ones, but they are the most powerful I've been able to find and have good frequency response. They are also HUGE so with my test rig I look pretty silly wearing them.
https://en.wikipedia.org/wiki/Grinder_(biohacking)
Personally, I've been a member of https://biohack.me since more or less its inception but I have yet to undergo any surgery. That will change soon, and transducer earphones are second on my list.
Hence my questions, I love to compare notes.
A surgery guide for a commercial transdermal product with lots of fun pictures: http://www.cochlear.com/wps/wcm/connect/8eb51452-641c-47a5-b...
The general consensus, after much experimentation, is that the targus isn't the best site because it just doesn't conduct loudly enough. Direct bone conduction via surgery of course works well, but then there is still the issue of power and amplification.
There's been talk in the past about a non-permanent dermal retainer that could do the same thing, and this could potentially be an all-inclusive package if done correctly. That's something I'd like to look into when I have the tools and money.
The spread between mid/high on the temple/targus and mid/low on the jaw are crazy though. When you have both it is full imaging that includes a space with a frustum inside your head.
Thanks for the body mod info! If you are looking at the implants I would highly suggest tying these positions I'm suggesting. I don't think it's worth the risk for the output!
* Large Driver - https://www.adafruit.com/product/1784
* Small Driver - https://www.adafruit.com/product/1785
There is a wide range of transducers out there, if you start digging around the units can be hard to find. Sometimes they are called Exciters. This company PUI Audio makes a bunch.
https://www.digikey.com/en/product-highlight/p/pui-audio/aud...
The large transducers from Adafruit are such odd components. I haven't really found anything that will push that much power, but I think there are better packages for my application. They sound great with the recommended 20w amp.
Here is the STM32Discovery board I am using and the FFT libs.
http://www.st.com/content/st_com/en/products/evaluation-tool...
I've been told by a few people that bone conduction noise canceling is impossible, but I beg to differ. I did a patent search the other day and it looks like Apple filed a patent on some bone conduction noise canceling headset concepts that use accelerometers[1] and so did another company I've never heard of[2]. Also in 2002 the us government funded a $100,000 research grant for it[3]. I do a lot of AR/VR R&D, I have for about 10 years. I'm pretty convinced that selective sound isolation with bone conduction headsets is crucial to a good AR experience too but at the end of the day I'd just like to be able to go to a social gathering without a performance hangover or not want to kill my buddy because his jaw clicks when he eats.
[1] http://appleinsider.com/articles/15/08/27/apple-researching-...
Next step would probably to get a few of these, see if you can record the hum on a few of them, and then start experimenting.
The theory behind triangulation is simple. But in practice, it's probably really hard to make sure all microphones have the same sensitivity. The standard approach depends on sounds being quieter when they are far away, but if one mic is naturally quieter (deeper inside the house, or more absorbant material, or just more obstacles in the way) that no longer works.
The best approach would be using a phase difference to measure. Exploiting the delay due to the speed of sound. That means you need some way to synchronize the recordings. Presuming a 20hz signal, you'd need your synchronization to be better than 0.05 seconds. This also requires the hum waveform to be easy to match. That is, you'd need to be able to tell the phase offset by matching parts of the sound.
You could also try a 'big data' approach, just cataloging all reported cases and looking for patterns. That requires dealing with very noisy data though, as reported cases will be inconsistent. This is due to people not always being home, not everyone hearing it, and no verification of reports.
edit: Interesing idea: use the 'bit data' approach together with wind speed and direction. The sound should be easier to hear when the wind blows it towards you. With enough data and corresponding wind data, you might have something. Does require compensating for correlation between time of day and the wind. If wind is west in the night, and less people hear things when the wind is west, that might just be because they are sleeping.
If you're looking to measure things near or below the limits of human hearing, I'd recommend looking at microphones designed for infrasound rather than low sensitivity microphones designed to go into the ultrasonic range. PCB and Brüel & Kjær are the big names here.
Measuring infrasound is pretty difficult, unfortunately. Most audio gear has a high pass filter, which makes sense for most uses but not this. Also, pseudo-noise from air currents is often a huge source of error.
Edit: Also, note that I mean doing hardware amplification of the electrical signal in the wire coming directly from the motion of the magnet of the speaker.
Microphone size doesn't really matter that much for low frequency sound. The Earthworks M50 suggested above? I wouldn't recommend it for this application because if you're going to spend a lot of money, it might as well be on something well-suited to the application. However, the approach it takes works and can be done for much less money. Cheap omnidirectional electrets go down pretty far[1], and you don't need the ruler flat response of the M50. You just need amplification circuitry that doesn't filter out the low frequency stuff you want.
DSP is commonly used to correct the frequency response of microphones. However, measuring frequency response is difficult and expensive.
[1] http://volcanomodels.sr.unh.edu/jbj/MICROPHONES/microphone_l...
However, please read my post above on what I actually found.
And yes, I don't expect comparing amplitude to be useful--sound localization almost always uses TDOA/phase difference for that reason.
On Youtube, it yields several people video recording them, from Russia to Asia: https://www.youtube.com/results?search_query=strange+sounds+...
This reminds me of a YouTube video I found from someone who thought they found a UFO near the Wal-Mart parking lot one night. It was the red blinking light on top of a water tower. People are very good at convincing themselves of things.
We only have their word to go by, and it's not much use given their leaning toward supernatural and conspiracy.
https://en.wikipedia.org/wiki/K%C3%A1rm%C3%A1n_vortex_street
This has been cited as a possible explanation for strange noises in the mountains at various locations and also as a possible cause of the infamous Dyatlov Pass incident.
Of course, other fluid dynamical instabilities could be responsible, so discounting a Karman vortex street doesn't eliminate fluid instabilities in general. A more general fluid dynamical instability is the Kelvin-Helmholtz instability: https://en.wikipedia.org/wiki/Kelvin%E2%80%93Helmholtz_insta...
Edited to remove snark
It's early in, look for the part about Vic Tandy.
I used to live right next to a busy highway, and that higher pitched white noise didn't bother me once. This unstoppable deep noise is incessantly annoying.
https://journals.ametsoc.org/doi/abs/10.1175/1520-0450%28197...
Wonder if it is something similar.
https://blog.caranddriver.com/explained-that-weird-throbbing...
I like the physiological suggestions in the replies, but I don't see how an entire community could suffer from the same thing without a common cause.
Earplugs only make it worse, because they filter out ambient noise that otherwise helps distract you from the incessant hum. Daytime is not as bad as night because of the natural activity sounds of a city.
I have read that waves and underwater currents hitting the shore (or below the shore) can cause vibrations that will translate through the earth. That could be a cause of such sounds in some parts of the world.
When I lived in the mountains of Colorado, with few people around and no industrial equipment anywhere, this hum would come and go and drive me nuts at night. I finally came to the theory that it was certain wind conditions going over the mountain ridge (across the valley), creating a pressure differential on the other side of the ridge. After the differential would reach a certain threshold, the air pattern would break up and create a pooof. This is sort of like if you are sitting in front of a campfire and the flame is going mostly on just one side of a log, but every second or so it breaks around both sides. The sound is identical, but singular. Although if it happens at a fast enough rhythm, it becomes a frequency that sounds very similar to a "hum". Of course the fire burns the wood and the conditions that make that happen change soon.
I have wondered what kind of measurement equipment it would take to try to identify the source... triangulate it somehow. I really wish I knew the definitive answers to some of these hums.