A gas water heater usually has an always on pilot light to avoid leaking unburned gas in case the main valve is stuck-open (or not fully closed). It's a failsafe, not a bug. (Which is why many heating systems refuse to turn back on automatically if they detect the pilot light goes off)
> Commercial buildings have had computers driving heating and cooling systems for a couple of decades
And they're expensive as fuck, and even today companies manage to mess up their setup (Berlin Airport cough).
They're only expensive "as fuck" because they're more like an overpriced SCADA system with multiple fail-overs and backups than the 12-20v system you have in your home. But that happens when you have 10 - 250 tons of heating and cooling for 500 - 30,000 people in a building.
For every over-engineered Berlin Airport (Siemens runs there, right? Arup won't make that make mistake) I can show you 10,000 buildings, factories, and warehouses done right. Or one Viipuri library (1935).
Depending on the technology used, not entirely true. If molten salt is used as heat exchange medium, it must be kept above its melting temperature at all times or you can scrap all the pipework.
As well as that the bathroom had a bidet sprayer [0], so that's what I used for cleaning the floor and tub - it which was pretty much the same as using pressure washer. After I was done I just left it to dry which took an hour or so.
[0] http://brondell.com/media/catalog/product/cache/1/image/500x...
My wife's family, in Iran, has a drain in the middle of the floor for this reason. She think it's very strange that this isn't common here in the US.
Hell, even just self-cleaning toilets and basins would be a start.
I think electric kettles are pretty common in the US among tea drinkers, but houses where everyone drinks coffee won't typically have one. Since most of the US prefers coffee, you don't get a lot of electric kettles.
When the element on my neighbors electric stove failed, the heating coil found its way through the insulator and the steel jacket. The electric current bored a hole through the aluminum pot she was using.
I didn't say anything about a bare, uninsulated electric coil being immersed in water.
The point is that this assembly is immersed in water; all the heat which escapes from it goes into the water.
This is not true of a stove top heating.
Despite a nice gas stove, the electric kettle is quicker to use. It also has some "brains" in that it shuts down after awhile if not turned off (say 3-5 minutes at desired temp).
I don't know how many times I've had things cooking on the stove and forgot about them due to work, etc.
I don't know much about science, but there must be a reason the cheapest way to warm the average house is gas-powered boilers.
Only if you've overfilled the kettle. They consume 3kW, but only for a short time. David MacKay FRS investigated the gas vs. electric question in detail: http://www.inference.phy.cam.ac.uk/sustainable/hotwater/
Fun additional fact: British tanks come with electric kettles enabling the crew to make tea in combat situations. https://en.wikipedia.org/wiki/Boiling_vessel
Having used both kettle technologies, my gut feeling is that heating a traditional kettle on gas just wastes a lot of the heat into the air by forcing the heat to penetrate an intermediary layer, whereas an electric kettle is insulated and puts heat directly into the water. This isn't a problem if you are boiling water to heat radiators because the lost heat is still helping heat the house. In that case you are saving the losses of converting heat to electricity (at the power plant) and then back to heat (in an electric heater).
Definitely! Starts a little under ±1000.
What I did find interesting is that it's not actually environmentally unfriendly, because the hot energy is stored in a very well insulated manner, and because it's near 100% efficient in the amount of water heated/used (whereas in a regular kettle you tend to overboil and boil too much water, and in an electric kettle there's often even a minimum fill that's larger than the needed water).
At least that's the story I've been reading on unaffiliated websites.
edit: searched using duckduckgo, not google
For a large quantity, the kettle wins. You could boil 4 l of water in a microwave oven, but it would take long. Over that time, a lot of heat would escape.
900W is weak for a microwave oven. You can get 1200W or more.
Doing some googling, it seems that around 1600W is still home use; 1800W and up is "commercial".
If it were really smart, I'd have a toilet and shower that uses 1/4 of the amount water, my gas stove would not have a pilot light, and "dumb" motion sensors for light have been around quite a while - but not ubiquitous (more common the EU).
Commercial buildings have had computers driving heating and cooling systems for a couple of decades (without thermostats but with temp sensors) so you don't need internet for that either. And I've never seen a house with VAV's installed in the ducts to actively heat/cool only the occupied portions of the home. And the easiest of all before construction - just "rotate" the foundation towards the sun to take better advantage of passive heating and cooling, that's an easy 15% energy bill savings.