News for hackers. Stuff that matters.
Re:Bent iPhone claims put Apple under pressure to respond by jrochkind1 on Wednesday September 24, 2014 @10:05AM (#8361466)
> "Even the most recent smartphones are not designed to be put in pockets where they are going to be under the most chassis strain. And this just illustrates the fact that the public's desire for manufacturers to strive for ever thinner and lighter devices means that we are getting ever more fragile devices.

> "Just casually sticking a £700 smartphone in your pocket is an increasingly reckless thing to do."

Wait, this guy really thinks that users should be expected to know that it's reckless to keep their _phone_ in their pocket, and that they weren't designed for this?

That seems not right. I am confident that most people, unless educated otherwise, will assume that phones are designed to go in pockets. If manufacturers really aren't designing phones to go in pockets, they are going to have to educate users on this. The pocket has been the place non-purse-carrying people have kept their phone since the first mobile phone that was small enough to fit in a pocket.

Re:Bent iPhone claims put Apple under pressure to respond by georgemcbay on Wednesday September 24, 2014 @10:16AM (#8361546)
Yeah that quote ("Just casually sticking a £700 smartphone in your pocket is an increasingly reckless thing to do.") and its blame-shifting to the user is really ridiculous. What the fuck are you supposed to do with it, keep it in a safe at home?

Analyst bias aside, I've seen many, many similar posts on the Internet on this issue from many users using similar logic. Apple doesn't have a monopoly on mindless fanboyism but their most ardent fans do tend to (pun intended) bend into more ridiculous positions than most while defending bad design decisions or quality assurance lapses made by the company.

Re:Bent iPhone claims put Apple under pressure to respond by Igglyboo on Wednesday September 24, 2014 @10:12AM (#8361518)
They mean back pockets, which while still ridiculous, is much more understandable than just saying pockets. If your phone is bending in your front pockets then there is a much more serious problem.
Re:Bent iPhone claims put Apple under pressure to respond by NDizzle on Wednesday September 24, 2014 @10:14AM (#8361537)
The phones have been bending while in peoples front pockets. Imagine the posture you have while driving a car and the phone in your pocket.

Now, I can't recall the last time I drove with any phone in my pocket (that is what the cup holder is for - phones) so I'm not too worried about it, but it's still interesting.

Has there been any news about the Samsung Note 1/2/3 bending?!

Re:Bent iPhone claims put Apple under pressure to respond by Pxtl on Wednesday September 24, 2014 @10:21AM (#8361584)
I have a lot of bones to pick with Samsung, but one thing they excel at is rugged devices. They use hardy materials and thick glass.

I have a 3-year-old device that's incredibly slippery and have dropped it hundreds of times without a scratch on the glass. For comparison, I shattered a Moto G inside of a month.

Re:Bent iPhone claims put Apple under pressure to respond by Tyrannosaurs on Wednesday September 24, 2014 @10:21AM (#8361583)
The Notes are plastic. They'd flex but would be unlikely to deform in any permanent way unless held like that for a long time I'd imagine.
Re:Bent iPhone claims put Apple under pressure to respond by praseodym on Wednesday September 24, 2014 @10:23AM (#8361599)
The article has been updated to say front or back trouser pockets, I quote:

"Even the most recent smartphones are not designed to be put in trouser pockets - front or back - where they are going to be under the most chassis strain. And this just illustrates the fact that the public's desire for manufacturers to strive for ever thinner and lighter devices means that we are getting ever more fragile devices.

Re:Bent iPhone claims put Apple under pressure to respond by Pxtl on Wednesday September 24, 2014 @10:16AM (#8361548)
I think collectively people are used to the idea that back pocket storage of your phone is unsafe and you're going to crush it and damage it.

Front pocket seems to be the expected place to keep one.

Re:Bent iPhone claims put Apple under pressure to respond by bananaj on Wednesday September 24, 2014 @10:27AM (#8361622)
I have always kept both my iPhone 4 and then my iPhone 5 in my back pocket (usually in a case). I have very regularly sat on both on a variety of surfaces and have never had any problems. I weigh about 150lbs. I've not bought an iPhone 6 yet specifically because I'm worried it will be too big for my back pocket.
Re:Bent iPhone claims put Apple under pressure to respond by Pxtl on Wednesday September 24, 2014 @10:31AM (#8361640)
Oh? I'm always seeing these tiny teenaged girls with cracked phones saying "I sat on it" which confuses me because it seems like they'd take that well. Thanks for confirming my confusion.
Re:Bent iPhone claims put Apple under pressure to respond by corobo on Wednesday September 24, 2014 @11:16AM (#8361917)
As a former heavier chap I tend to sit down on things gently just in case they don't take my weight. I would say the full weight isn't down until the phone is nicely cushioned by cheek flesh.

Maybe they're dropping down like rocks onto the phone resulting in sudden stresses rather than a (relatively) more gradual stress

iPhone 4s and 5s, frequently in back pocket with nothing more small scrapes/scratches on the edges from being occasionally butter-fingered

Re:Bent iPhone claims put Apple under pressure to respond by jbrooksuk on Wednesday September 24, 2014 @10:09AM (#8361492)
I have always put phones in my front pockets - not so much my back, unless I'm going for a walk - but it's never been an issue since the first phone I ever had. It's completely ridiculous not to put it in a pocket of some sort.

My iPhone 6 is due to be delivered on the 7th Oct, so I'm hoping it's just a faulty batch.

Re:Bent iPhone claims put Apple under pressure to respond by praseodym on Wednesday September 24, 2014 @10:24AM (#8361608)
It seems to be only affecting the iPhone 6 Plus though, i.e. the largest model.
Re:Bent iPhone claims put Apple under pressure to respond by jbrooksuk on Wednesday September 24, 2014 @11:05AM (#8361841)
I'm sure I read that a couple of 6 users had experienced this too?
Re:Bent iPhone claims put Apple under pressure to respond by adriand on Wednesday September 24, 2014 @10:07AM (#8361485)
I love Apple (I've got an iPhone 5, an iPad 3, a Macbook and an iMac) but it always dismays me how Apple fans often respond to any issue with an Apple product with "it's your fault".

A guy on MacRumors posted up about his experience with a bent phone and received some supportive comments, but also gems like, "It's aluminum, it's a noticeably longer device and as such it is likely to be bent more easily than previous iPhones. You should expect that it would be easier to bend and act accordingly."

How is this reasonable? We should know better than to put the phone in our pockets?

I sincerely hope Apple does the right thing here and takes responsibility if in fact this turns out to be a legitimate and widespread problem.

Re:Bent iPhone claims put Apple under pressure to respond by martiuk on Wednesday September 24, 2014 @10:33AM (#8361655)
People like to defend their purchases, especially their $700 ones.
Re:Bent iPhone claims put Apple under pressure to respond by jader201 on Wednesday September 24, 2014 @10:01AM (#8361447)
I've owned every generation of iPhone since the 3GS, and definitely think this is being blown out of proportion. I have a 6 (4.7"), and don't have (and doint think I ever will have) any issues with this.

However, I will say that the Galaxy Note bend video [1] in (response to the iPhone 6 Plus bend test [2]) was impressive, and shows that while metal material is more stylish, plastic seems to be much more durable. Of course, I know these are far from scientific tests, but it still seems to show some sense of durability between the two.

[1] https://www.youtube.com/watch?v=FwM4ypi3at0

[2] https://www.youtube.com/watch?v=znK652H6yQM

Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:08AM (#8361489)
It's not really plastic vs. metal, it's plastic vs. aluminum. Steel would be a much better choice for strength, it's just heavy.
Re:Bent iPhone claims put Apple under pressure to respond by jader201 on Wednesday September 24, 2014 @10:13AM (#8361526)
Absolutely right. I guess it's more like this:

  - Stylish
  - Durable
  - Lightweight
Pick two.
Re:Bent iPhone claims put Apple under pressure to respond by m_mueller on Wednesday September 24, 2014 @10:19AM (#8361578)
Well - Titanium. But then we get into issues with mass availability.
Re:Bent iPhone claims put Apple under pressure to respond by jpgvm on Wednesday September 24, 2014 @10:26AM (#8361618)
There are a number of magnesium alloys which while not as tanky as titanium would be I think would be viable contenders to construct the chassis out of. You could still use an aluminium skin as it's much more attractive usually.
Re:Bent iPhone claims put Apple under pressure to respond by m_mueller on Wednesday September 24, 2014 @11:33AM (#8362029)
I've never seen an aluminium skin on a magnesium alloy. Does that work?
Re:Bent iPhone claims put Apple under pressure to respond by kissickas on Wednesday September 24, 2014 @10:22AM (#8361594)
I thought iPhones were normally designed to feel heavier (and therefore more expensive) than other phones. The 6 and 6+ both weigh more than the 5s, although I'm not sure how it "feels" given the bigger size (I haven't held one yet).
Re:Bent iPhone claims put Apple under pressure to respond by Pxtl on Wednesday September 24, 2014 @10:18AM (#8361560)
iirc, aluminum is actually stronger than steel if you calculate it per-unit-weight. So alternately they could've made it a bit thicker. Obviously, I'm a software guy and not a materials engineer.
Re:Bent iPhone claims put Apple under pressure to respond by ominous_prime on Wednesday September 24, 2014 @10:31AM (#8361642)
Yes. Aluminum and stainless steel have very similar "Specific Strength" characteristics, though the steel is slightly stronger and has a much higher tensile strength. In a measure of stiffness, aluminum has a higher "Specific Modulus" than steel, and can often be constructed into forms that give it more "strength" (in the meaning overall rigidity) for a given weight.
Re:Bent iPhone claims put Apple under pressure to respond by esolyt on Wednesday September 24, 2014 @10:32AM (#8361646)
I think the issue is mainly with the iPhone 6 Plus, not the 6.
Re:Bent iPhone claims put Apple under pressure to respond by cpwright on Wednesday September 24, 2014 @10:15AM (#8361541)
So at least for me, if I can't stick a phone in my pocket it is useless. If I can't carry my phone with me everywhere, I might as well not have it. I can understand not sitting on it, but not putting it in my front pocket seems incredibly limiting, because that is pretty much the only place I would have to put it when out and about.

I expect most people will have a case for the phone. I personally have a 5 right now and have it in a BookBook wallet/case, which is not really very rigid. I'll want something similar when it comes time to upgrade to a 6, but if I can't actually stick it in my pocket I'll need to find an alternative. Or maybe pay for a battery replacement on the 5.

Re:Bent iPhone claims put Apple under pressure to respond by ChristianGeek on Wednesday September 24, 2014 @05:34PM (#8364275)
I wouldn't dream of carrying my phone in my pocket...I wear jeans most of the time and it's just plain uncomfortable. I've always carried my iPhones in a vertical, open-ended belt holster (the Sena Elega), which allows me to quickly reach down and retrieve the phone or hit the power button to silence an alarm/call. (Obviously the new position of the power button will prevent me from the latter.)
Re:Bent iPhone claims put Apple under pressure to respond by ZanyProgrammer on Wednesday September 24, 2014 @10:30AM (#8361637)
5s? That's what I'm leaning towards upgrading from the 5.
Re:Bent iPhone claims put Apple under pressure to respond by cpwright on Wednesday September 24, 2014 @10:56AM (#8361789)
I think the bigger screen of a 6 and the promise of Apple Pay provides enough additional value over the 5. I don't find the 5s as compelling an upgrade, and would rather spend $90 on a battery instead of hundreds on a 5S (the battery is really only complaint I have about my 5).
Re:Bent iPhone claims put Apple under pressure to respond by rayiner on Wednesday September 24, 2014 @10:06AM (#8361474)
Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:11AM (#8361508)
The iPhone 6+ is thinner and longer than the iPhone 5, so it makes a lot of sense it would be more prone to bending due to physics.
Re:Bent iPhone claims put Apple under pressure to respond by rayiner on Wednesday September 24, 2014 @10:16AM (#8361551)
The point is that these articles come out every time there is a new thin phone, but then you never hear about it again because it doesn't happen to any substantial portion of buyers.
Re:Bent iPhone claims put Apple under pressure to respond by Tyrannosaurs on Wednesday September 24, 2014 @10:32AM (#8361649)
We need to know the proportion of people this is happening to to understand whether this is a thing or not.

Apple supposedly sold 10 million phones on the weekend of release, more since. Apparently more of those are 6s than 6 Pluses but we don't know the exact numbers or breakdown right now. Similarly we know a few people have had problems but it doesn't seem clear whether it's a few, a few tens, a few hundred or many thousands.

Ultimately this may be bad design ignoring real world valid use cases, it may be dumbness on the part of a small number of vocal users, but without knowing what sort of numbers are seeing the problem and what that is as a proportion of sales it's almost impossible to say.

Right now all we can really say is some iPhone 6s and 6 Pluses have bent and based on that it's no wonder Apple haven't said anything.

Not a great story but probably all that we really know right now.

Re:Bent iPhone claims put Apple under pressure to respond by zenciadam on Wednesday September 24, 2014 @01:04PM (#8362624)
Saw one of those phones on Monday before I was aware that this was a thing. The phone looked like a piece of vinyl that had been left out on a hot summer day.

No real defence for this other than poor engineering. It's basically the Apple III all over.

Re:Bent iPhone claims put Apple under pressure to respond by higherpurpose on Wednesday September 24, 2014 @10:35AM (#8361672)
Even if it happens to "only 2 percent" of iPhone 6 Plus owners, that seems like a pretty big number to me for such an issue to even exist.
Re:Bent iPhone claims put Apple under pressure to respond by hyperpape on Wednesday September 24, 2014 @10:51AM (#8361757)
I would consider 2 percent a huge number, yes. I'd also expect Apple to do refunds for those 2 percent, both in the sense that I'd demand it if it were my phone, and that historically they've done things like that.

But we still need to know the number. Has anything so far suggested it might be as high as 2 percent?

Re:Bent iPhone claims put Apple under pressure to respond by Tyrannosaurs on Wednesday September 24, 2014 @11:06AM (#8361847)
Only 2% would almost certainly be tens of thousands so I'd agree.

But right now this doesn't feel like this is tens of thousands.

On the other hand it is early days.

Re:Bent iPhone claims put Apple under pressure to respond by TheIronYuppie on Wednesday September 24, 2014 @10:25AM (#8361612)
I wonder to what extent this (and the antenna issue before it) are a result of Apple being so secretive. Because they don't take prototypes out for real world testing, or encase them in bulky facades if they do, they don't understand how real people are going to use it.

Still think it's stupid - just because this behavior didn't result in a bent iPhone before doesn't mean it was good.

Re:Bent iPhone claims put Apple under pressure to respond by blisterpeanuts on Wednesday September 24, 2014 @10:11AM (#8361509)
A few ideas about this problem:

1. Consumer behavior factors

- Get a case. These devices will break if dropped, and when you are carrying it in your hand many times a day, it is highly likely to be dropped. It's a matter of "when", not "if".

- Don't carry the device in pants pockets. Carry it in a shirt pocket, or in a bag or satchel or hang it on your belt. Solved.

2. Manufacturing and marketing factors

- Distribute 5,000 beta devices and really field test them. Manufacturers, especially Apple, hate to do this because it reveals the secret design in advance of the dramatic release event. But field testing the devices makes more sense given their complexity and unknown uses and conditions to which they will be subjected.

- Make the devices thicker and sturdier. Many of us would not complain about an extra millimeter or two of thickness, especially if it means a bigger battery and some nice-to-haves such as a memory card slot. Thinness is costly, too. Make it an indestructible brick, charge less, and millions will continue to buy the devices.

- An alternative view: yield to bendiness! Make the displays bendy, make the cases flexible, and accept that customers want to abuse their phones by sitting on them in tight jeans.

Re:Bent iPhone claims put Apple under pressure to respond by kumarm on Wednesday September 24, 2014 @10:15AM (#8361540)
>>Get a case. If getting case is a Must, why even worry about slim and beautiful devices? So much for good Industrial Design.
Re:Bent iPhone claims put Apple under pressure to respond by nilkn on Wednesday September 24, 2014 @12:43PM (#8362464)
Perhaps the reason there's a tendency towards thinner phones is precisely because of the bulk added on by the inevitable case.

Even a thicker phone is going to risk getting scratched or dented if dropped on solid concrete or rocks.

In my case, though, I choose to live somewhat on the edge and just get total insurance coverage on my phone (a Note 3 currently). In five years of owning smartphones, I've cracked the screen exactly once, and I just got a replacement phone within a week.

Re:Bent iPhone claims put Apple under pressure to respond by blisterpeanuts on Wednesday September 24, 2014 @10:20AM (#8361581)
True... but every phone out there has a plethora of cases available for it. Customers have accepted that a case is a necessary accessory and indeed it's a way to personalize their devices. That's why someone can make a living selling cases in a kiosk at the mall.
Re:Bent iPhone claims put Apple under pressure to respond by seanflyon on Wednesday September 24, 2014 @02:38PM (#8363263)
I have not accepted that a case is a necessary accessory.
Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:13AM (#8361525)
Seems like a case would only help if it was made of metal.
Re:Bent iPhone claims put Apple under pressure to respond by Tyrannosaurs on Wednesday September 24, 2014 @10:24AM (#8361607)
If a metal phone is bending why couldn't a metal case?

It's not the material, it's the construction. The case could be made of plastic so long as it had something along the long sides preventing it flexing.

Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:58AM (#8361799)
True. I should have said that a case will only help if it's structural. Most of them are not.
Re:Bent iPhone claims put Apple under pressure to respond by joezydeco on Wednesday September 24, 2014 @09:52AM (#8361388)
I really want Apple to issue a statement along the lines of "You asked for a thinner lighter phone, you got it. Now stop being an idiot and sitting on it and we'll all be fine."

This is all just incredibly stupid. The fact it bends and continues to function should be newsworthy, not the other way around.

Re:Bent iPhone claims put Apple under pressure to respond by personZ on Wednesday September 24, 2014 @10:05AM (#8361468)
Who asked for a thinner, lighter phone? This is a serious question, because I keep seeing this being held as a response to customer demand, when actually few asked for a thinner, lighter phone.

They wanted a larger phone, for sure, but I think one would reasonably assume structural stability for a $1000 consumer device (often bought under a pay-as-you-go loan courtesy of carrier subsidization) under fairly normal conditions.

Further this isn't "sitting on it" -- the issues seem to be coming via seemingly innocuous, but longer term, flexing in front pockets. Aluminum is not all or nothing, and will quite happily give slowly and gradually over hours.

Maybe it's all overblown -- these things tend to be on new Apple releases -- but I don't see how some can so quickly resort to blame the customer antics.

Re:Bent iPhone claims put Apple under pressure to respond by DanBC on Wednesday September 24, 2014 @10:13AM (#8361531)
> Who asked for a thinner, lighter phone?

I've never seen "thinner" nor "lighter". I have seen people asking for better battery life and that would mean fatter phones.

Re:Bent iPhone claims put Apple under pressure to respond by hyperpape on Wednesday September 24, 2014 @10:11AM (#8361511)
How many high-selling phones do you see that have the thickness of an iPhone 4? The trend is towards thinner and lighter. Maybe the phone manufacturers are wrong, but in general we expect our technology to get thinner and lighter.

That said, it has reached the point where I'd be ok to have slightly more weight and thickness for sturdiness and battery life. I just think thin and light are things people want.

Re:Bent iPhone claims put Apple under pressure to respond by personZ on Wednesday September 24, 2014 @10:24AM (#8361602)
The trend is towards thinner and lighter.

The trend is towards a comfortable size, beyond which thinness stopped being a big selling point. The Galaxy S5, for example, is thicker than the Galaxy S4. The Note 4 is thicker than the Note 3.

Contrary to common notions, Apple occasionally chases specs, and the thin and light thing seems to be one of them (just as unobtanium type materials often make a big presence in Apple devices -- material specs -- regardless of suitability for purpose).

Apple makes fantastic devices, but just as some other manufacturers chase irrelevant things like octal core processors and truly absurd pixel densities, Apple does the same "not for your benefit, but for our bragging" pursuits.

Re:Bent iPhone claims put Apple under pressure to respond by hyperpape on Wednesday September 24, 2014 @10:46AM (#8361730)
Huh--I think I've been sniped by the larger screens and curves of my coworkers' Android phones. They look thinner than my 5S, but they're about the same thickness--sometimes even more. My assumption was that Apple had been playing a game of leapfrogging vs Android phones on thinness.
Re:Bent iPhone claims put Apple under pressure to respond by RealGeek on Wednesday September 24, 2014 @02:00PM (#8362998)
> Who asked for a thinner, lighter phone?

Probably the same people who use OtterBox & LifeProof cases on iPhone. Most iPhone users slap on ugly cases to protect their beautiful iPhones. Wouldn't it be much better if Apple builds an iPhone sturdy enough that it doesn't require a case?

Re:Bent iPhone claims put Apple under pressure to respond by blisterpeanuts on Wednesday September 24, 2014 @10:25AM (#8361610)
It would be an interesting marketing experiment if Apple released an alternative model that was fatter, e.g. the iPhone 6 Plus "Big Mac" Edition.

This unit could have a fatter battery, a sturdier chassis, a USB socket or two, and a memory slot. See how much acceptance of a thicker handset there is.

Apple's so secretive and protective of their devices that they're clearly reluctant to field test interesting new models, except maybe internally in a controlled environment. But this is precisely what they, and all manufacturers, ought to be doing.

Re:Bent iPhone claims put Apple under pressure to respond by bananaj on Wednesday September 24, 2014 @10:34AM (#8361663)
I think this is as thin as phones are going to get. The camera is going to be the limiting factor, the bump that Apple now have proves this. However, I may be wrong and some kind of pop-out lens assembly is the solution to this.

In that case, eventually the width of the Lightning port will be the limiting factor (I'm assuming Apple will probably obsolete the headphone jack within 5 years once they work out how to recharge headphones regularly and easily)

Re:Bent iPhone claims put Apple under pressure to respond by joezydeco on Wednesday September 24, 2014 @10:29AM (#8361633)
If size and weight didn't matter, the reviews wouldn't talk about it. Yet here we are.

http://www.extremetech.com/computing/189762-iphone-6-vs-ipho...

Re:Bent iPhone claims put Apple under pressure to respond by personZ on Wednesday September 24, 2014 @10:39AM (#8361688)
Reviewers talk about whatever the manufacturer holds up as a feature. That has nothing to do with consumer demand. Further of course they "matter" in that you want a device to be comfortable, but your notion that customers of Apple devices demanded thinner or lighter is specious -- I have literally never seen anyone complain about prior iterations going back several generations being too thick or too heavy. It is not something anyone seemed to cry out for, despite your quick blame-the-user assessment.
Re:Bent iPhone claims put Apple under pressure to respond by kissickas on Wednesday September 24, 2014 @10:31AM (#8361641)
Now that you have me thinking about it, the only reason I would ever want my phone to be thin is so it doesn't bulge out of my front pockets. This is why the Razr was so awesome. Other than that, I can't think of any reason why thinner would be better.
Re:Bent iPhone claims put Apple under pressure to respond by hyperpape on Wednesday September 24, 2014 @10:53AM (#8361765)
Some people take their phones on a run.
Re:Bent iPhone claims put Apple under pressure to respond by Goronmon on Wednesday September 24, 2014 @09:59AM (#8361427)
"You asked for a thinner lighter phone, you got it. Now stop being an idiot and sitting on it and we'll all be fine."

Surely customers don't need to include specifications like "Device does not bend under moderate force" when asking for improvements?

Re:Bent iPhone claims put Apple under pressure to respond by RyanZAG on Wednesday September 24, 2014 @10:00AM (#8361439)
The screen generally cracks after a bit of bending. It's more than just sitting on it too: it appears to bend fairly easily in day to day usage, far more than other similar devices.

I don't think anybody really asked for a thinner or lighter phone anyway, it's just what Apple provided.

Re:Bent iPhone claims put Apple under pressure to respond by cloudwalking on Wednesday September 24, 2014 @10:05AM (#8361464)
Day to day usage? No, don't think so...
Re:Bent iPhone claims put Apple under pressure to respond by cstross on Wednesday September 24, 2014 @10:03AM (#8361459)
Somewhere in my apartment there is the user manual for an Apple LaserWriter NT from 1992.

The preamble to the printer manual (yes, printers came with 300 page printed paperback manuals in those days!) included instructions such as "do not expose your LaserWriter NT to rain or adverse weather conditions; do not operate your LaserWriter NT in the shower".

Presumably due to an idiot lawsuit following an incident when someone under the misapprehension that heavy electrical appliances and water were a perfectly safe combination ...

Re:Bent iPhone claims put Apple under pressure to respond by rsfinn on Wednesday September 24, 2014 @10:18AM (#8361566)
Famously, from the definition of "drool-proof" (http://www.catb.org/jargon/html/D/drool-proof-paper.html): "Do not expose your LaserWriter to open fire or flame."

The closest actual source I can find quickly is this printout from the LaserWriter II manual, which states (more reasonably) "Don't use devices that produce open flames, such as Bunsen burners or welding torches, near the LaserWriter II." (https://stuff.mit.edu/afs/sipb/user/sly/Laserwriter/0303215L...)

[updated with more precise references]

Re:Bent iPhone claims put Apple under pressure to respond by KJasper on Wednesday September 24, 2014 @09:58AM (#8361421)
"You're holding it wrong" is my expected response.
Re:Bent iPhone claims put Apple under pressure to respond by ArcticCelt on Wednesday September 24, 2014 @10:00AM (#8361436)
Or maybe Apple will release a model of more loosely fitting jeans to put less pressure on the phone?
Re:Bent iPhone claims put Apple under pressure to respond by pkorzeniewski on Wednesday September 24, 2014 @10:15AM (#8361539)
I wonder how much such jeans with Apple logo would cost.. :)
Re:Bent iPhone claims put Apple under pressure to respond by hanley on Wednesday September 24, 2014 @10:33AM (#8361659)
You joke, but Apple did have a clothing line at one point...

http://www.businessinsider.com/apple-80s-clothing-line-2014-...

Re:Bent iPhone claims put Apple under pressure to respond by blisterpeanuts on Wednesday September 24, 2014 @10:15AM (#8361542)
iPants!
Re:Bent iPhone claims put Apple under pressure to respond by akramhussein on Wednesday September 24, 2014 @09:59AM (#8361428)
"Don't put it in your pocket" :)
Re:Bent iPhone claims put Apple under pressure to respond by ZanyProgrammer on Wednesday September 24, 2014 @09:58AM (#8361424)
On the other hand, I wouldn't want to spend several hundred dollars on a bendable phone, regardless if it still works. On the other other hand, I've been considering upgrading from the 5 to the 5s, so bend away!
Re:Bent iPhone claims put Apple under pressure to respond by dhimes on Wednesday September 24, 2014 @10:12AM (#8361515)
Actually, if I could bend it around in play, like gumby, that would be quite fun. Might lose a couple days' productivity though...
Re:Bent iPhone claims put Apple under pressure to respond by talmand on Wednesday September 24, 2014 @10:19AM (#8361569)
Actually, a functioning bendable phone sounds like a good thing to me. Less likely to break if dropped.
Re:Bent iPhone claims put Apple under pressure to respond by msabalau on Wednesday September 24, 2014 @10:13AM (#8361522)
Product managers and designers have to make the correct trade offs among the many things that people value.

The question here is if Apple got the trade-offs wrong, and made the phone too thin at the expense of something that people might care about more--putting it in a front pocket, like you can do with numerous other phones with large screens. Or are these failures simply bizarre edge cases of which we are aware because any "news" about Apple is linkbait.

Re:Bent iPhone claims put Apple under pressure to respond by dmalik on Wednesday September 24, 2014 @09:58AM (#8361425)
Pretty sure it was in the front pants pocket. Maybe they'll release a statement for free iPhone 6 belt clips...
Re:Bent iPhone claims put Apple under pressure to respond by epochwolf on Wednesday September 24, 2014 @10:00AM (#8361440)
I know more than a few people that carry smart phones in their back pockets.
Re:Bent iPhone claims put Apple under pressure to respond by malka on Wednesday September 24, 2014 @10:05AM (#8361465)
Where I live, that's the surest way to get your phone stolen.
Re:Bent iPhone claims put Apple under pressure to respond by song on Wednesday September 24, 2014 @10:47AM (#8361737)
I wanted a thicker sturdy phone with more battery and without a protruding camera and I don't think I'm the only one.
Re:Bent iPhone claims put Apple under pressure to respond by paromi on Wednesday September 24, 2014 @10:12AM (#8361517)
I have one of the slimmest android devices huawei p6 (6.2 mm vs 7.1 mm for iphone 6 plus) for a year and a half and im not having any issues with it bending or giving the feeling that its fragile.

http://www.gsmarena.com/huawei_ascend_p6-5467.php

Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:22AM (#8361593)
Is the back plate on that metal or plastic? It's the metal back that is bending and then staying bent, while plastic will bend and then return back.
Re:Bent iPhone claims put Apple under pressure to respond by 51Cards on Wednesday September 24, 2014 @09:59AM (#8361431)
I suspect this could also be related to iPhone users having had a fairly small phone to date. Slipping the iPhone into a pocket till now has been an easy practice, so I assume the same is being done out of habit with the new larger models. The new form factor (larger AND thinner) can't stand up to the stresses.
Re:Bent iPhone claims put Apple under pressure to respond by Naga on Wednesday September 24, 2014 @10:02AM (#8361448)
Somehow, my Galaxy Note 2 has survived the rigors of my front pocket for close to two years without bending or cracking. Phablets really aren't that big.
Re:Bent iPhone claims put Apple under pressure to respond by jojofanboy on Wednesday September 24, 2014 @12:43PM (#8362466)
There is a lot of fanboys out there still defending Apple with ridiculous arguments. Being a consumer, for me, this is unacceptable. Paying 800 to 900€ for a phone that has the quality of a sub 100€ phone is simply taunting the actual Apple costumers.

Mark my words. This will be the major flop remembered in the future for the start of the downfall of this brand.

This will make history.

The excessively low production costs with these devices made in China with low quality standards and low QA at an excessively price range for the end consumer. The profit margin in this phone has to be huge and will serve as an example in the future in how a major international manufacturing fiasco is made of. This is truly amazing.

Re:Bent iPhone claims put Apple under pressure to respond by IgorPartola on Wednesday September 24, 2014 @10:27AM (#8361626)
So I thought that http://imgur.com/gallery/FSXJp was a joke. Turns out, nope, it's a real problem. I wonder if Apple did have to fix it, how they'd go about it. I assume reenforcing the body of the phone externally is not really feasible, but manufacturing better bodies and swapping them out en masse would be very expensive and take a long time, no?
Re:Bent iPhone claims put Apple under pressure to respond by joshdance on Wednesday September 24, 2014 @10:21AM (#8361585)
We have seen this before. https://discussions.apple.com/thread/260526?tstart=0 Put a think computer in your pocket, bend, and it will bend. Get a case or protect it. I have had an iPhone since the 3, never used a case, only broken one iPhone by being extra careful.
Re:Bent iPhone claims put Apple under pressure to respond by steanne on Wednesday September 24, 2014 @12:55PM (#8362561)
apple has specifically advertised the iphone as fitting in a pocket.

http://www.youtube.com/watch?v=ZxtyxCAxGNE

Re:Bent iPhone claims put Apple under pressure to respond by 27182818284 on Wednesday September 24, 2014 @10:08AM (#8361488)
I played with the 6+ for the first time last night, and it surprises me people even sit down with it. It seems like like it would be immediately awkward from its size.
Re:Bent iPhone claims put Apple under pressure to respond by squid_ca on Wednesday September 24, 2014 @10:02AM (#8361449)
Has this been a problem with other, non-Apple phones of a similar form factor? If so, this is a design issue. If not, this is an Apple design issue.
Re:Bent iPhone claims put Apple under pressure to respond by nilkn on Wednesday September 24, 2014 @10:04AM (#8361463)
It's a problem with the phone's aluminum construction. A phone like the Note 3, made with less premium-feeling plastic, responds better to stress like this. It can be bent, but it just bends right back with no permanent bend left.
Re:Bent iPhone claims put Apple under pressure to respond by pmahoney on Wednesday September 24, 2014 @10:12AM (#8361516)
The aluminum phone yields, undergoing plastic deformation, while the plastic phone deforms elastically.
Re:Bent iPhone claims put Apple under pressure to respond by zzenon on Wednesday September 24, 2014 @10:14AM (#8361535)
perfect opportunity for Apple to introduce iPants.

Joke aside, this is something that Apple needs to quickly address without putting customers at fault. You cannot just tell the customers not to put their phones in their pocket.

Re:Bent iPhone claims put Apple under pressure to respond by _pmf_ on Wednesday September 24, 2014 @10:23AM (#8361600)
> Joke aside, this is something that Apple needs to quickly address without putting customers at fault. You cannot just tell the customers not to put their phones in their pocket.

They cannot address the issues for existing devices and all devices that are in the pipeline. Users on backorder could cancel their orders, but most won't do that, so why should they bother? In a year people will be joking about not buying first generation Apple devices and that's it.

Re:Bent iPhone claims put Apple under pressure to respond by serve_yay on Wednesday September 24, 2014 @09:52AM (#8361387)
Oh brother.
Re:Bent iPhone claims put Apple under pressure to respond by blisterpeanuts on Wednesday September 24, 2014 @10:27AM (#8361628)
...wherefore art thou?