News for hackers. Stuff that matters.
Re:Bent iPhone claims put Apple under pressure to respond by jader201 on Wednesday September 24, 2014 @10:01AM (#8361447)
I've owned every generation of iPhone since the 3GS, and definitely think this is being blown out of proportion. I have a 6 (4.7"), and don't have (and doint think I ever will have) any issues with this.

However, I will say that the Galaxy Note bend video [1] in (response to the iPhone 6 Plus bend test [2]) was impressive, and shows that while metal material is more stylish, plastic seems to be much more durable. Of course, I know these are far from scientific tests, but it still seems to show some sense of durability between the two.

[1] https://www.youtube.com/watch?v=FwM4ypi3at0

[2] https://www.youtube.com/watch?v=znK652H6yQM

Re:Bent iPhone claims put Apple under pressure to respond by smackfu on Wednesday September 24, 2014 @10:08AM (#8361489)
It's not really plastic vs. metal, it's plastic vs. aluminum. Steel would be a much better choice for strength, it's just heavy.
Re:Bent iPhone claims put Apple under pressure to respond by jader201 on Wednesday September 24, 2014 @10:13AM (#8361526)
Absolutely right. I guess it's more like this:

  - Stylish
  - Durable
  - Lightweight
Pick two.
Re:Bent iPhone claims put Apple under pressure to respond by m_mueller on Wednesday September 24, 2014 @10:19AM (#8361578)
Well - Titanium. But then we get into issues with mass availability.
Re:Bent iPhone claims put Apple under pressure to respond by jpgvm on Wednesday September 24, 2014 @10:26AM (#8361618)
There are a number of magnesium alloys which while not as tanky as titanium would be I think would be viable contenders to construct the chassis out of. You could still use an aluminium skin as it's much more attractive usually.
Re:Bent iPhone claims put Apple under pressure to respond by m_mueller on Wednesday September 24, 2014 @11:33AM (#8362029)
I've never seen an aluminium skin on a magnesium alloy. Does that work?
Re:Bent iPhone claims put Apple under pressure to respond by kissickas on Wednesday September 24, 2014 @10:22AM (#8361594)
I thought iPhones were normally designed to feel heavier (and therefore more expensive) than other phones. The 6 and 6+ both weigh more than the 5s, although I'm not sure how it "feels" given the bigger size (I haven't held one yet).
Re:Bent iPhone claims put Apple under pressure to respond by Pxtl on Wednesday September 24, 2014 @10:18AM (#8361560)
iirc, aluminum is actually stronger than steel if you calculate it per-unit-weight. So alternately they could've made it a bit thicker. Obviously, I'm a software guy and not a materials engineer.
Re:Bent iPhone claims put Apple under pressure to respond by ominous_prime on Wednesday September 24, 2014 @10:31AM (#8361642)
Yes. Aluminum and stainless steel have very similar "Specific Strength" characteristics, though the steel is slightly stronger and has a much higher tensile strength. In a measure of stiffness, aluminum has a higher "Specific Modulus" than steel, and can often be constructed into forms that give it more "strength" (in the meaning overall rigidity) for a given weight.
Re:Bent iPhone claims put Apple under pressure to respond by esolyt on Wednesday September 24, 2014 @10:32AM (#8361646)
I think the issue is mainly with the iPhone 6 Plus, not the 6.