News for hackers. Stuff that matters.
Re:How Machines Learned Precision by ahazred8ta on Tuesday October 06, 2026 @05:05PM (#49984134)
Interesting that many of the early steam mills used a steam engine to pump water into a water tower, which then drove a conventional water wheel to power the millworks.
Re:How Machines Learned Precision by glinscott on Wednesday October 07, 2026 @04:03PM (#49998079)
Yes, until they were able to get smooth rotation out of the engines, the water wheel was a much smoother source of power. Especially for looms and weaving machines, stable, smooth power was critical. "Power in the Industrial Revolution" by Richard L Hills is a deep exploration of the history there :).
Re:How Machines Learned Precision by HPsquared on Wednesday October 07, 2026 @04:11PM (#49998149)
Reliable too, I suppose.
Re:How Machines Learned Precision by glinscott on Wednesday October 07, 2026 @08:54PM (#50000731)
The rivers and streams actually turned into a battleground! This is an excerpt from my beam engine article:

The fight for water Richard Arkwright's water-powered mill at Cromford opened in 1771, and the factory system that followed created fierce demand for the best river sites. Water-powered mills were also dependent on the weather: a dry season could shut down the factory.

Steam pumping engines offered a solution. An engine lifted the water that had passed beneath the wheel back up the hill, allowing the same water to fall through the wheel again. This kept the smooth turn of the water wheel, but wasted coal moving the water. Watt sold sixteen to twenty horsepower pumping engines to deliver ten horsepower to the machines.

Watt's double-acting engine, beam, crank and flywheel let the engine directly turn the line shaft. This met a huge demand from mill owners who wanted to build near workers and materials rather than around a particular stretch of river.11 One problem remained, though: every time a machine was turned on or off, the load on the engine changed.

Re:How Machines Learned Precision by cowlevel on Wednesday October 07, 2026 @08:21PM (#50000525)
Early electric mills replaced their big centralised steam engine with a big centralised electric motor. And the first web browser was a program running within a non-web-based operating system.
Re:How Machines Learned Precision by m4rtink on Wednesday October 07, 2026 @09:26PM (#50000939)
Yeah, saw one house that was this kind of "electric mill" originally - electric motors were expensive so it made perfect sense to just have one big motor and transfer the power using leather transmission belts. Not to mention all the machines needing power at that point expecting it to come from a belt drive.

The big motor and most of the machinery was long gone but you could still see where the belts went through duento various holes and cutouts, now usually closed by wooden blanks.

Re:How Machines Learned Precision by HPsquared on Thursday October 08, 2026 @07:31AM (#50004553)
That reminds of those old belt-driven ceiling fan systems. You'd have a single motor and a system of belts arranged on the ceiling to drive an array of ceiling fans. I think that'd be a super charming feature to bring back in bars and cafés.