News for hackers. Stuff that matters.
Re:Hacking Washing Machines [video] by landr0id on Monday December 29, 2025 @09:33PM (#46428854)
Pretty cool for BSH and Miele to hop on a call with the researchers just to make sure there were no issues they were unaware of. Sounded like it was productive and positive for everyone involved. Hopefully they don't start doubling down on hardware security though :p

The optical communication for the Miele was pretty interesting too. I'm assuming it's to prevent moisture from corroding a port of some kind. Does anyone know of other devices this is used in or other benefits to this?

Re:Hacking Washing Machines [video] by opello on Monday December 29, 2025 @09:47PM (#46428963)
> I'm assuming it's to prevent moisture from corroding a port of some kind.

The primary value discussed in the talk was electrical isolation since there's mains voltage in the appliance and the potential for shorts or inadequate isolation would require some kind of isolation, so a path that optically isolates the communication makes quite a bit of sense.

I'm also curious if other devices have gone this route.

Re:Hacking Washing Machines [video] by bri3d on Monday December 29, 2025 @10:07PM (#46429089)
LG appliances at least used to use acoustic signaling for diagnostics: hold a phone up and the washer makes some modem-esque (I think it’s 4-tone / 4-FSK) noises and the app or technician can diagnose issues. It was originally engineered to even work over voice codecs, so a customer without a smartphone could relay the diagnostic session to a technician.
Re:Hacking Washing Machines [video] by opello on Monday December 29, 2025 @10:27PM (#46429209)
That's pretty cool. I found a write-up[1] on it but unfortunately didn't come across any examples of the communication.

[1] https://github.com/kabelincho/LG-Smart-Diagnostics-modem

Re:Hacking Washing Machines [video] by bri3d on Monday December 29, 2025 @10:32PM (#46429240)
There are lots of examples on YouTube, this one seems succinct: https://youtube.com/shorts/3Eb315vL9uw . They picked good tones to make it satisfying IMO. I don’t know of anyone who’s reversed the bitstream in public, though, but it doesn’t seem like it should be very hard.
Re:Hacking Washing Machines [video] by opello on Monday December 29, 2025 @10:49PM (#46429335)
That's a great example, thanks! I was looking for "LG Smart Diagnostics" and "audio" and then "LG Acoustic Diagnostics" and found TVs calibrating their audio playback but not this. Trying "LG Audible Diagnosis" found a bunch like yours.
Re:Hacking Washing Machines [video] by imglorp on Monday December 29, 2025 @10:29PM (#46429225)
That's some advanced gatekeeping right there. Where other appliances might have a blink code or several digit error display (Miele) to look up in a manual, the phone method tires you to the manufacturer.
Re:Hacking Washing Machines [video] by noAnswer on Tuesday December 30, 2025 @12:24AM (#46429847)
The support hotline will ask you to hold your phone towards the device. It is less error-prone (than a human) and contains more info than a blink code. I find it really clever.
Re:Hacking Washing Machines [video] by imglorp on Tuesday December 30, 2025 @11:07AM (#46434698)
Sure it's clever. But it also means you can't repair the appliance without the manufacturer's server to decode it for you.
Re:Hacking Washing Machines [video] by grepfru_it on Tuesday December 30, 2025 @12:19PM (#46435550)
Owner of an LG washer that failed here.

All the same diagnostics you can do at the machine, the phone home service allowed a remote engineer to diagnose as well. Things like drum rpm, tilt/knock sensors, uneven balance detection. Instead of paying a human $250 to come out and press buttons, they can do it remotely.

I understand in the pessimistic age of John Deere, all remote diagnostics are bad, but that is not the case here. I was able to do all of the diagnosis myself to determine it was a bad stator and then replace it myself.

Re:Hacking Washing Machines [video] by yhager on Wednesday December 31, 2025 @11:11AM (#46445396)
How were you able to diagnose it yourself? Just through the error codes, or is there another interface available for non-technicians?
Re:Hacking Washing Machines [video] by grepfru_it on Friday January 02, 2026 @09:44AM (#46465222)
You enter diagnostic mode on the panel, there exists a service manual which describes the process
Re:Hacking Washing Machines [video] by thesuitonym on Tuesday December 30, 2025 @12:28PM (#46435670)
It doesn't require a server, it just requires knowing what the codes mean, same as blinking lights.

Decoding it without help would be difficult for the average consumer, but it's not an impossible task.

Re:Hacking Washing Machines [video] by landr0id on Monday December 29, 2025 @10:43PM (#46429310)
>so a customer without a smartphone could relay the diagnostic session to a technician

Do you mean by mimicking the noises themselves?

Re:Hacking Washing Machines [video] by notpushkin on Tuesday December 30, 2025 @12:16AM (#46429788)
By holding their phone up to the machine.
Re:Hacking Washing Machines [video] by wpm on Monday December 29, 2025 @10:51PM (#46429347)
No you see you just need to buy specially marked boxes of Cap'n Crunch that have a plastic whistle in them that plays the tones for you.
Re:Hacking Washing Machines [video] by userbinator on Tuesday December 30, 2025 @01:16AM (#46430123)
I wonder how many HN readers still get that reference (and 2600, etc.)
Re:Hacking Washing Machines [video] by hunter2_ on Tuesday December 30, 2025 @02:39AM (#46430578)
We make use of a service already existing without paying for what could be dirt-cheap if it wasn't run by profiteering gluttons...
Re:Hacking Washing Machines [video] by Y_Y on Tuesday December 30, 2025 @10:20AM (#46434154)
I'm merely middle aged, but I've read the hacker lore.

https://en.wikipedia.org/wiki/Blue_box

Re:Hacking Washing Machines [video] by atoav on Tuesday December 30, 2025 @02:42AM (#46430601)
The absolutely "leetest" thing I have ever seen was a device where the firmware update was to be done by:

1. Hold a button while booting (pretty normal)

2. This reconfigures the circuit path of one of the LEDs so it is reverse-biased to VCC via its resistor and switches one of the microcontroller GPIOs to ADC input

3. You go to a website that plays a strobe pattern (encoding the firmware)

4. You hold that website in front of the LED till other LEDs blink, signifying a successful update

They could have done this using a photodiode, but no, they had to abuse an LED. Not many people are aware that LEDs can in a certain configuration be used to measure light.

Re:Hacking Washing Machines [video] by nicolaslem on Tuesday December 30, 2025 @11:44AM (#46435100)
Another example of firmware update reusing something that is already there: some electric guitar effects from TC Electronics can be reprogrammed by bringing a phone close to the guitar pickups. The phone app encodes the data as sound that is picked up by the guitar pickups and sent down the chain to the effect.
Re:Hacking Washing Machines [video] by atoav on Wednesday December 31, 2025 @12:23AM (#46441623)
Ahh good example I remember having done that myself before!
Re:Hacking Washing Machines [video] by mjochim on Monday December 29, 2025 @11:01PM (#46429412)
Electric meters often blink a signal LED for every X kWh, so other devices can read the signal. I'm not sure if this is used for bidirectional communications, though.
Re:Hacking Washing Machines [video] by bigfatkitten on Tuesday December 30, 2025 @12:18AM (#46429801)
No, but they also have a separate infrared interface for this.

https://en.wikipedia.org/wiki/IEC_62056

Re:Hacking Washing Machines [video] by NegativeLatency on Tuesday December 30, 2025 @12:30AM (#46429876)
Smart meters have a whole protocol
Re:Hacking Washing Machines [video] by eru on Tuesday December 30, 2025 @12:36AM (#46429912)
Alternatively, I guess you could also use really thin cables to carry the low voltage paths; and that act as fuses, if ever a lot of current at high voltage was flowing across them? But probably not very reliable both in regular operation and as fuses.

We have a Miele washing machine and a Miele dryer. Solid machines all around even after years of use.

Re:Hacking Washing Machines [video] by bdonlan on Tuesday December 30, 2025 @04:08AM (#46431147)
Fusible traces aren’t uncommon - but they would effectively destroy the device if current limits are exceeded, and they certainly would be if the power supply is non-isolated, so it wouldn’t actually be a solution to the firmware update problem.

The usual solution here is an optical coupling of some kind - optocouplers (a box with a LED, photodiode, and air gap between them) are very common for this purpose, and are an inexpensive and effective option for digital signaling across an isolation boundary.

In this case they’ve basically built a custom optocoupler out of discrete components, which is a bit unusual, but makes sense when you consider the risk of corrosion due to water ingress at the diagnostic ports, and the need to access it while - for example - a dishwasher cycle is running.

Re:Hacking Washing Machines [video] by MisterTea on Tuesday December 30, 2025 @09:07AM (#46433440)
> The optical communication for the Miele was pretty interesting too. I'm assuming it's to prevent moisture from corroding a port of some kind.

IRDA was very popular at one point and still lives on in applications like these. It's an IR serial port hung off a UART. It's stupid simple requiring no cables, pairing, or complex protocol stacks. Some smart phones have IR blasters built in so its a total win for ease of deployment in cases like these.