Re:The bicymple. The bicycle, simplified.
by nateberkopec on Wednesday October 10, 2012 @09:19AM
(#4636171)
I don't understand why you'd "simplify" out the most important part of the bicycle - the gears. A bicycle (even a fixie/single) is the most amazing, important human-powered machine because of the mechanical efficiency introduced by the gears.
Without gears, it's just a unicycle with two wheels. While interesting, and probably a nice novelty to ride, I wouldn't call this a triumph of "Design" by any means.
I hate shitting on people's inventions on HN (way too easy to potshot and armchair QB) but the way they sell this as a "design" product sort of irked me. It looks fun but good design it ain't.
EDIT: Maybe the headline should have been "the unicycle, made slightly more complicated"
Re:The bicymple. The bicycle, simplified.
by alexkus on Wednesday October 10, 2012 @09:28AM
(#4636187)
A 27" gear from direct drive is utterly impractical. Direct drive is only 8mph at 100rpm. You go at a nice cruising/commuting speed of 20mph you'd need to spin out 250rpm. I can only maintain 200rpm for short bursts!
It needs something akin to a the Schlumpf "mountain drive" cranks (to lengthen the gears rather than shorten them) to give a gear up in to at leas the 60"-70" gear inches range that's more suitable for road use.
Re:The bicymple. The bicycle, simplified.
by snogglethorpe on Wednesday October 10, 2012 @09:50AM
(#4636281)
They say this in the comment section:
> "To address the problem you bring up, we have designed an overdrive hub system that will make the gearing comparable to that of the average singlespeed bike."
Re:The bicymple. The bicycle, simplified.
by gamache on Wednesday October 10, 2012 @09:24AM
(#4636184)
Nothing really got simplified here. There's now twice as many steering columns, the rear hub became more complicated, and so did its dropout because now there's pedals there. We've lost gear ratios other than 1:1. And I didn't see braking of any sort.
It's basically a swing bike (fun, but taxing on the core muscles and not very stable at high speed) with the rear axle aft of the saddle (so I'm guessing it's a nutbuster).
Freakbikes are great, but this reeks of concept fluff.
Re:The bicymple. The bicycle, simplified.
by glenntzke on Wednesday October 10, 2012 @10:19AM
(#4636410)
Honestly, I expected the rear hub to lock with backpedaling reminiscent of training bikes. Looks like I join the negativity train here in that it looks less comfortable and certainly is less stable than your normal bicycle. And it doesn't solve size issues well compared to folding commuter bikes.
Looks like a novel take on the bicycle (perhaps for an industrial design course/exercise?) but the weight savings don't cut it.
Re:The bicymple. The bicycle, simplified.
by 51Cards on Wednesday October 10, 2012 @09:15AM
(#4636154)
Watching the video the bike looks to be inherently unstable even when rolling forward. The rider is using his body to control the direction of the rear wheel and corners look pretty shaky if you don't keep the alignment right. It may have fewer parts but to my eye it looks like it has more ways this could go very wrong. Sort of like when you are pushing one of those rolling dolly's where all 4 wheels rotate independently.
Re:The bicymple. The bicycle, simplified.
by army on Wednesday October 10, 2012 @10:55AM
(#4636558)
Yeah, as well, if you locked the rear wheel then you would probably be in a lot of trouble. I guess maybe they don't even have rear brakes (which is another problem of its own)
Re:The bicymple. The bicycle, simplified.
by junto on Wednesday October 10, 2012 @09:15AM
(#4636157)
It looks both uncomfortable and impractical for day to day commuting. There seems to be a constant pressure on the leg muscles because the back wheel also pivots. No luggage rack and shortly wheelbase makes the breaking more dangerous.
Re:The bicymple. The bicycle, simplified.
by alpine01 on Wednesday October 10, 2012 @09:42AM
(#4636247)
Looks more like a 2 wheeled Unicycle, than a "simplified" bicycle.
"In geometry, there's nothing as strong as a triangle. Diamond-frame bikes consist basically of two triangles. The elegance and simplicity of this design is very hard to improve upon. Billions of diamond-frame bikes have been made from tubing for over a century, and during that time, hundreds of thousands of very smart people have spent billions of hours riding along and thinking about ways to fine-tune the performance of their bikes. The tubular diamond frame has been fine-tuned by an evolutionary process to the point where it is very close to perfection, given the basic design and materials. " - Sheldon Brown
Re:The bicymple. The bicycle, simplified.
by jschulenklopper on Wednesday October 10, 2012 @09:45AM
(#4636261)
See http://vanmoof.com for a nicer, better, more practical and more stylish bike from Dutch designers. Quote from their site:
We stripped the traditional Dutch bike from redundant hoo-ha [...]
and added sensibility instead. The result? Simplistic striking
bikes so smooth that they fit your style demands, yet so functional
they make you go to work whistling. The no-nonsense VANMOOF bike
is the ultimate urban commuter tool, anywhere around the globe.
Re:The bicymple. The bicycle, simplified.
by jschulenklopper on Friday October 12, 2012 @09:55AM
(#4645023)
True. Especially in The Netherlands, when you buy a second-hand bike (for example for commuting to the train station) it is very common to invest the same amount of money in a quality lock.
At bigger train stations in NL, often there are guarded parking areas for bicycles. Smaller stations are likely to have 'bike lockers' for rent.
Re:The bicymple. The bicycle, simplified.
by droithomme on Wednesday October 10, 2012 @11:09AM
(#4636634)
From an ergonomics standpoint, having your hands and butt at the exact same level has always been bad for your body. On competitive racing bikes this made some sense where one was trying to reduce the last bit of drag, but in all other cycling contexts it would make more sense not to be doing this. Here we see the same layout, this time apparently only to preserve artistic symmetry of the frame design since this bike without gears is certainly not suitable for competitive racing.
Re:The bicymple. The bicycle, simplified.
by harlanlewis on Wednesday October 10, 2012 @11:29AM
(#4636734)
This is an oversimplification - good cycling form has many benefits beyond aerodynamics and power.
For example, your typical commuter bike allows the rider to sit in a standard upright position. While many new to bikes find this more comfortable, each bump in the road sends a jolt up through the seat post that continues unimpeded vertically up the rider's spine, compressing each disc in the vertebrae. Sore butt and an aching back at the end of the ride.
Adopting road cycling form, aside from strengthening your core, allows your torso to act as a shock absorber, harmlessly waggling away the energy.
Re:The bicymple. The bicycle, simplified.
by harlanlewis on Wednesday October 10, 2012 @02:04PM
(#4637467)
There is no shortage of vehicles to ride :)
As this thread started with a commuter bike, I'll stick to commuting. The low visibility of recumbents in traffic (both of the rider and what the rider can see) is a bigger issue than ergonomics.
Each rider determines their own level of acceptable risk, etc etc, but regulation has nothing to do with their lacking adoption for commuters.
Re:The bicymple. The bicycle, simplified.
by eru on Wednesday October 10, 2012 @05:46PM
(#4638372)
You could stick a neon flag on top.
> Each rider determines their own level of acceptable risk, etc etc, but regulation has nothing to do with their lacking adoption for commuters.
That's true. The greatest drawback of my recumbent is the inability to use backpack at the same time. (Sure there are saddlebags, but that's less convenient.)
Re:The bicymple. The bicycle, simplified.
by davidw on Wednesday October 10, 2012 @03:18PM
(#4637730)
Put your average person on a road bike, and they're going to freak out just a little bit. They're not real stable, comfortable or natural, especially at slow speeds.
Re:The bicymple. The bicycle, simplified.
by army on Wednesday October 10, 2012 @05:31PM
(#4638318)
They're actually very stable once you're moving, more so than some other bike geometries and at low speed I can't tell much of a difference. If someone else was used to a different bike design then I can see it might take a bit of adjustment. Once you're used to them they handle better and are more comfortable on long rides than most other bike designs.
Re:The bicymple. The bicycle, simplified.
by davidw on Friday October 12, 2012 @03:16PM
(#4646435)
> Once you're used to them they handle better and are more comfortable on long rides than most other bike designs.
Well, yeah, that's what they're made for: the best possible experience for people who know what they're doing. Commuter type bicycles are generally meant to be reasonably comfortable for the less bicycle-oriented.
Re:The bicymple. The bicycle, simplified.
by bagosm on Wednesday October 10, 2012 @09:12AM
(#4636141)
The claim that the moving parts are less than a regular bike is just... It not only has more moving parts, it also has movement on two new axis too!
But I dont see the problem with the regular bikes that this solves. Even if it were true that regular bikes required a few maintenance more, the cost to buy a new chain and oil it up now and then is close to nothing
Re:The bicymple. The bicycle, simplified.
by smacktoward on Wednesday October 10, 2012 @11:16AM
(#4636673)
Not to mention that the biggest design problem with current bikes is that they are simultaneously fairly expensive (multiple hundreds of dollars, except for the lowest of the low end) and extremely easy to steal.
If someone could make a reasonably reliable bike that's so cheap you wouldn't care if it got stolen, or an expensive bike that was extremely hard to steal, that would be a design improvement of the first magnitude.
Re:The bicymple. The bicycle, simplified.
by jroseattle on Wednesday October 10, 2012 @10:56AM
(#4636559)
I rode the STP (Seattle to Portland) a few years ago. 2 days, 206 miles over "rolling hills" and country roads. (Rolling hills = description they give so that more than just hard-core bikers will do it.) It was strenuous for all but the most seasoned and hard-core distance riders.
And I see the stereo-typical Portlandia dude riding the route on his unicycle! Not one of the chain-driven ones, but non-geared. He had to pedal the entire distance, up hills and down others. Amazing he rode that far on that bike.
Re:The bicymple. The bicycle, simplified.
by arethuza on Wednesday October 10, 2012 @09:49AM
(#4636276)
There used to be a chap who commuted through central Edinburgh on a unicycle - over Dean Bridge through the New Town and up the Mound towards the Old Town.
Re:The bicymple. The bicycle, simplified.
by winkerVSbecks on Wednesday October 10, 2012 @10:14AM
(#4636385)
Everyone here has pointed out why this bike is not simple or usable and the designer has sort of justified this argument by not even mentioning why this is a simplified bike on the website. It marketing 101, if you are making a better product – tell people why it's better!
Re:The bicymple. The bicycle, simplified.
by zerostar07 on Wednesday October 10, 2012 @10:46AM
(#4636511)
Is this for real? I would like to see a video where it's not a parking lot or an empty square. The guy seems to be visibly trampling around corners in the park. I can't imagine what could happen in a sharp corner at anything above 2 km/h
Re:The bicymple. The bicycle, simplified.
by knowaveragejoe on Wednesday October 10, 2012 @11:15AM
(#4636669)
Can someone explain the point of having a freely rotating rear wheel? It makes no sense to me. I can see myself constantly worrying I'll turn too much and burn my inner calf on the tire.
Re:The bicymple. The bicycle, simplified.
by bravoyankee on Wednesday October 10, 2012 @09:55AM
(#4636306)
In regards to bikes in general, the formfactor is nearly perfected and there are designs to accommodate almost anyone. I think the innovations need to be in the public's perception and increased usage of them (and not cars).
Without gears, it's just a unicycle with two wheels. While interesting, and probably a nice novelty to ride, I wouldn't call this a triumph of "Design" by any means.
I hate shitting on people's inventions on HN (way too easy to potshot and armchair QB) but the way they sell this as a "design" product sort of irked me. It looks fun but good design it ain't.
EDIT: Maybe the headline should have been "the unicycle, made slightly more complicated"
It needs something akin to a the Schlumpf "mountain drive" cranks (to lengthen the gears rather than shorten them) to give a gear up in to at leas the 60"-70" gear inches range that's more suitable for road use.
> "To address the problem you bring up, we have designed an overdrive hub system that will make the gearing comparable to that of the average singlespeed bike."
Of course, there goes the "simplicity"...
...so, a bicycle?
http://www.youtube.com/watch?v=JXmBrD4b4EI&sns=em
It's basically a swing bike (fun, but taxing on the core muscles and not very stable at high speed) with the rear axle aft of the saddle (so I'm guessing it's a nutbuster).
Freakbikes are great, but this reeks of concept fluff.
Looks like a novel take on the bicycle (perhaps for an industrial design course/exercise?) but the weight savings don't cut it.
I think I'll stick to my classic Dutch Gazelle: http://www.gazellebikes.com/Collection%20bikes/Urban_bicycle...
Although what I really want is one of these: http://www.gazellebikes.com/Collection%20bikes/Urban_bicycle...
"In geometry, there's nothing as strong as a triangle. Diamond-frame bikes consist basically of two triangles. The elegance and simplicity of this design is very hard to improve upon. Billions of diamond-frame bikes have been made from tubing for over a century, and during that time, hundreds of thousands of very smart people have spent billions of hours riding along and thinking about ways to fine-tune the performance of their bikes. The tubular diamond frame has been fine-tuned by an evolutionary process to the point where it is very close to perfection, given the basic design and materials. " - Sheldon Brown
[1] http://en.m.wikipedia.org/wiki/Boneshaker_(bicycle)#section_...
At bigger train stations in NL, often there are guarded parking areas for bicycles. Smaller stations are likely to have 'bike lockers' for rent.
I don't think this is going to be one of those times.
This looks like it could be good to ride for fun, not so much for everyday transportation.
I'd be worried about the stability of such a short bicycle, and the speed of such small wheels and wide tires.
For example, your typical commuter bike allows the rider to sit in a standard upright position. While many new to bikes find this more comfortable, each bump in the road sends a jolt up through the seat post that continues unimpeded vertically up the rider's spine, compressing each disc in the vertebrae. Sore butt and an aching back at the end of the ride.
Adopting road cycling form, aside from strengthening your core, allows your torso to act as a shock absorber, harmlessly waggling away the energy.
The only reason they ride uprights at races is regulations.
As this thread started with a commuter bike, I'll stick to commuting. The low visibility of recumbents in traffic (both of the rider and what the rider can see) is a bigger issue than ergonomics.
Each rider determines their own level of acceptable risk, etc etc, but regulation has nothing to do with their lacking adoption for commuters.
> Each rider determines their own level of acceptable risk, etc etc, but regulation has nothing to do with their lacking adoption for commuters.
That's true. The greatest drawback of my recumbent is the inability to use backpack at the same time. (Sure there are saddlebags, but that's less convenient.)
A head tube angle of 74 degrees would make a normal bicycle a pretty sketchy ride, IIRC, to say nothing of a 31" wheel base.
Well, yeah, that's what they're made for: the best possible experience for people who know what they're doing. Commuter type bicycles are generally meant to be reasonably comfortable for the less bicycle-oriented.
But I dont see the problem with the regular bikes that this solves. Even if it were true that regular bikes required a few maintenance more, the cost to buy a new chain and oil it up now and then is close to nothing
If someone could make a reasonably reliable bike that's so cheap you wouldn't care if it got stolen, or an expensive bike that was extremely hard to steal, that would be a design improvement of the first magnitude.
Sure, the back wheel pivots.
But...no rear brakes no chain no sprockets... no freewheel...
And I see the stereo-typical Portlandia dude riding the route on his unicycle! Not one of the chain-driven ones, but non-geared. He had to pedal the entire distance, up hills and down others. Amazing he rode that far on that bike.
http://luddo.freehostia.com/Climbs/Climbs5.htm