News for hackers. Stuff that matters.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by 0cf8612b2e1e on Monday October 20, 2025 @02:10PM (#45647146)
Have diamonds found their way into other industrial cooling solutions? With the research into gem grade diamonds, I have been expecting cheap ugly synthetic diamonds to be used in more products. I have long joked that I want a diamond frying pan.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rbanffy on Wednesday October 22, 2025 @01:19PM (#45672244)
> I have long joked that I want a diamond frying pan

As long as you don’t use it on a gas stove, you should be fine.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by kees99 on Saturday October 25, 2025 @06:45AM (#45702775)
Why? Diamond has very low thermal expansion, so no risk of stress/embrittlement/cracks from uneven heating.

Or you mean it'll catch fire? Also not a concern. That is supposed to happen at a temperature well above anything useful for cooking.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rbanffy on Saturday October 25, 2025 @07:24AM (#45702988)
The temperature of the blue flame on a stove should be above 1000 Celsius, well above what’s required to oxidise diamonds. They won’t catch fire, but your diamond pan will erode. Once you remove it from the flame, it won’t continue “burning”.

Should be safe on electrical stoves though.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by kees99 on Saturday October 25, 2025 @08:33AM (#45703410)
Would that >1000°C reach the surface though?

There are some heady boundary-layer effects and temperature/temp-conductivity gradient physics involved here. For simplicity sake, consider a plastic [1] bag full to the brim with water, held over open flame. Will bag melt (oxidize, erode)?

[1] polyethylene melts around 120-ish °C and ignites around 220-350 °C (sources vary)

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by galangalalgol on Saturday October 25, 2025 @10:08AM (#45704040)
Someone sells a diamond coated pan https://bluediamondshopping.com/
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by mjevans on Saturday October 25, 2025 @11:10AM (#45704490)
It's probably fine on the inside?
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by IAmBroom on Tuesday October 28, 2025 @09:43AM (#45732805)
Why are you using a question mark.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by mjevans on Wednesday October 29, 2025 @01:17AM (#45742909)
The material would be 'fine', but I'm not sure how safe or effective it would be as I'm not a materials expert. Just considering the risk of the material. (Yeah, the material would be fine, is it safe and beneficial? That part of 'fine' I can't define.)
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rbanffy on Monday October 27, 2025 @01:20PM (#45723731)
That's a good point. Have you done the experiment?
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by kees99 on Monday October 27, 2025 @03:01PM (#45724954)
As it happens, yes. That is - I was watching others do it, in a summer camp, as a kid.

There is also this, if you don't want to mess with open fire yourself:

https://www.youtube.com/results?search_query=boil+water+plas...

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by LtdJorge on Saturday October 25, 2025 @07:13AM (#45702935)
I think because it will burn your hand?
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rbanffy on Saturday October 25, 2025 @07:26AM (#45702995)
It’s safe to assume the handle is made from something else.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by IAmBroom on Tuesday October 28, 2025 @09:44AM (#45732813)
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by PunchyHamster on Saturday October 25, 2025 @11:17AM (#45704551)
Just put them on inside only
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rbanffy on Monday October 27, 2025 @01:20PM (#45723742)
But wasn't the point that diamond is a great hear conductor?
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by IAmBroom on Tuesday October 28, 2025 @09:45AM (#45732822)
It would still work, if the bottom cladding were very thin, and a decent conductor.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by Atomic_Torrfisk on Saturday October 25, 2025 @06:32AM (#45702721)
> ugly synthetic diamonds

Not any more, their quality has increased recently. Not that I care, wife and I did without them during our engagement.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by jrk on Saturday October 25, 2025 @09:24AM (#45703719)
I think the point was not that gem-grade synthetic diamonds are ugly, but that, as industry masters gem-grade production, presumably below-gem-grade production (“ugly synthetic diamonds”) would become cheap enough to deploy in more engineering settings where diamond’s other unique properties were the key concern.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by Yossarrian22 on Saturday October 25, 2025 @10:46AM (#45704308)
I’m surprised nobody has done a phone screen yet
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by Tuna-Fish on Saturday October 25, 2025 @12:48PM (#45705255)
Large single crystal diamond, what is required for a nice transparent screen, is still quite expensive. This article is about polycrystalline diamond, which is not really that transparent, but is nearly as good at thermal conduction as monocrystalline diamond.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by akshatjiwan on Saturday October 25, 2025 @03:29PM (#45706354)
Your comment reminds me of apple's attempt to make sapphire screens. That didn't turn out so well.

https://www.theguardian.com/technology/2014/feb/10/sapphire-...

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by addaon on Saturday October 25, 2025 @03:33PM (#45706382)
Apple still uses sapphire screens on the nicer watches.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by KiwiJohnno on Saturday October 25, 2025 @11:00PM (#45708808)
I have a Garmin with a sapphire screen. I've worn it every day for over 5 years, working on cars, in the garden, snorkelling on coral reefs.

In short, I my watch has NOT had an easy life. I've made no attempt to protect it or taken it off for anything except charging. There is barely a mark on the screen. A sapphire screen will be a hard requirement for my next watch.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by cassianoleal on Sunday October 26, 2025 @11:28AM (#45712671)
I wear mine while rock climbing. The watch has been put through a lot of beating against all kinds of rock. I've already chewed through 3 straps on this watch. The titanium case is lightly scratched, but the screen is absolutely pristine!

This is my second sapphire Garmin, and it's absolutely worth the premium.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by IAmBroom on Tuesday October 28, 2025 @09:34AM (#45732704)
> I've already chewed through 3 straps on this watch.

Ever consider carrying a protein bar or two?

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by cassianoleal on Wednesday October 29, 2025 @06:46AM (#45745069)
:)
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by rowanG077 on Saturday October 25, 2025 @02:27PM (#45705977)
Even if that were cheap I don't think diamond would excel in this use case. It's of course extremely hard but I'd expect that it would be extremely prone to cracking. In addition the high index of refraction would make the diamond screen very reflective and you would need some fancy coating which of course wouldn't be as strong as diamond.
Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by IAmBroom on Tuesday October 28, 2025 @09:39AM (#45732759)
I don't know why you expect it would be prone to cracking, but it isn't - or else a wedding ring would have a life expectancy shorter than the average marriage.

As for a reflective screen, the term for that is "shiny", and could be marketed as desirable - it signals that the owner has an expensive watch. It wouldn't interfere with use, unless the user was wearing a bright headlamp.

Re:Diamond Thermal Conductivity: A New Era in Chip Cooling by gpm on Saturday October 25, 2025 @10:58AM (#45704405)
3D printer nozzles, which is sort of the opposite (industrial heating products).

Part of the argument is that better heat conduction means that you can run the nozzle cooler resulting in less heat conduction to the cold side (above where you want the filament to melt) so I guess its "cooling" in a sense too.