The visceral negative response you get from, "Wait, I don't think that's right, it's more complicated than that", helps prevent speaking up the next time, unless you have an inherently disagreeable personality (which I cherish working with). I see it all the time with kids. They'll see some fundamental truth that takes a sideways perspective to see, and be told they're wrong, hacking off an interesting way of perceiving the world. It's unfortunate, but it's also something most adults are bad at, including myself.
And, I very often microwave my spoons, forks, even metal bowls, without them heating up at all. But I also have a basic understanding of resonance, absorption, insulation, apertures, and the wavelengths involved. I don't do it at work, because it's not worth the effort responding to "you're going to break the microwave", even if you show them that the food is hot and the fork is cool.
That said, I wouldn't melt metal in an expensive microwave. The metal has poor absorption relative to the magnetron antenna itself, so both will heat. I wouldn't be surprised if the antenna is also glowing a bit (at least early on)!
You don't make the metal absorb the microwaves. Either your crucible or the inner lining of your insulator will be designed to do the absorbing.
That is exactly the case with our setup.
For a rant about that, it turned out pretty neat. I put the beach sand in a thin layer on a dinner plate that was a half wavelength above the bottom of the microwave, turntable removed. The beach sand would start to melt where the standing waves were, but then quickly grow into a wire structure, with the growth of the tips driven by where absorption would be maximized, allowing the thing to heat more, and grow more. I tried to model the resulting "antenna", but none of the open source tools at the time could handle the complexity.
Even scientific models that we regard as describing fundamental laws of nature will stop describing reality accurately once you hit extreme conditions -- Newtonian physics breaks once you're dealing with relativistic contexts, for example.
The human mind has tendency to generalize its heuristics, and hold certain rules to be either absolutely true or absolutely untrue, which unfortunately hobbles our ability to use our rationality to its fullest potential. People will often dismiss an entire model as being universally "false" as soon as they see a single data point that it doesn't work for, and then try to formulate a new model that's still trying to encompass everything, everywhere. Maybe we'd do better to interpret falsifying data points as helping to map the outer boundaries of the model's applicability, and formulate multiple models, each optimized for different contexts, and each regarded as valid within its bounds.
You should also put something (eg. a cup of water) in the oven to absorb some of the microwave energy. The metal doesn't absorb much energy so without an additional absorber the microwaves can get reflected back into the magnetron and overheat the oven.
My microwave oven comes with a metal stand that you're supposed to put into it when doing certain kinds of baking. Likely it's engineered to be massive enough, it has rounded edges everywhere, and is supposedly sized so that there are no pieces that would resonate at 2.4 GHz and thus consume a lot of energy and overheat.
Mehdi Sadaghdar has a great video on this:
https://www.youtube.com/watch?v=OyTmJX_TC84
Kudos to anyone who does actual experiments to test “common knowledge.”
Layer1 is thermally insulating. Keeps the heat in the brick. It is still 300ish celsius at the end of the melt, and it increases further as the whole structure "cools".
Layer2 "captures" the microwave radiation and is the thing the microwave oven heats. All that energy is captured inside the brick and layer1 doesn't let it out so it heats up very quickly.
And then layer2 heats up the crucible via mainly heat conduction (so the interface has to be neat between them) and only to a lesser extent via heat radiation.
The main dangers of the operation is the same as with any other process which results in tens of grams of molten metal. Those would be not new to anyone who casts metal. (But entirely outside of the experience of someone who never worked with molten metal before.) Everyone with normal household experience would know that molten metal is hot, what might surprise someone without specific training or very good intuitive grasp of physics is that if it contacts water the water immediately turns into steam and that will make the molten metal fly everywhere. [1] So that would be the first unexpected turn of events. Hopefully you have a bucket of sand ready to put out the resulting fire, because water is not your friend in this situation.
It is also important as you pack the crucible to not form a "bridge" between the walls with the metal. Because before the metal melts it expands. And if you pack the to-be-melted metal too tight it will crack the graphite crucible. Which would ruin the brick.
Then the other surprise is that the layer1 keeps heating up even after you have removed the brick from the microwave. (because layer2 is very hot, and that heat is slowly dissipating through layer1) And if you use the brick too much without letting it cool down between melts it might crack, or it might crack the glass plate of the microwave.
1: this is how that looks on a much bigger scale https://youtu.be/oWSHEC1N770?si=lc1ZKXxQ9kOsuhz0
He concludes that this specific instance is not unsafe (if you have a turntable, the mass of the staple is low, etc). But then, I've put grapes in a microwave and produced plasma.
[0] Microwaves also contain transformers.
I’m a hobby jeweler and I use an ordinary household microwave to melt copper and silver to cast my projects.[1] At the same time “everybody knows” that you can’t put metal in a microwave.
What gives? Is everybody wrong? Of course not. It is just that the statement “don’t put metal in a microwave” is a simplified form of the true statement which would go something like this “don’t put metal in a microwave, unless you follow these safety precautions, and wear these safety gear, and your crucible is made of the appropriate materials, and your moulds are bone dry and …”. Aint nobody has the time to think about all the caveats and dangers when all they want is to warm their meals. So it is simpler, easier, and safer to tell people the abbreviated form of the rule.
1: here is a video https://youtu.be/Oim2QsDp0rY?si=CZrhg6ux1GfiDWqd