Re:SD Express cards from Samsung promise faster-than-SATA sp...
by tombert on Saturday March 09, 2024 @08:57PM
(#39656154)
Yeah, the unreliability of SD cards is the main reason that I stopped using single board computers as my home server. It was extremely frustrating to have everything break when the SD card decided to stop working.
Say what you want about spinning disk drives, but in my experience they tend to be a lot more resilient than SD cards.
Re:SD Express cards from Samsung promise faster-than-SATA sp...
by codetrotter on Saturday March 09, 2024 @09:28PM
(#39656280)
eMMC has been far more reliable for SBC use in my experience so far, compared to SD and microSD cards.
For example, Raspberry Pi Compute Module 4 has variants with different sizes of eMMC.
Also, making the rootfs read-only goes a long way. In Raspberry Pi OS you can go into the raspi-config menu and choose Performance -> Overlay, something like that to make the rootfs readonly with an overlay fs that exists in ram only. Depending on your situation it may be useful to enable this. (Anything you actually want to persist you’ll have to write to another attached storage, or send over the network to somewhere else.)
Re:SD Express cards from Samsung promise faster-than-SATA sp...
by tombert on Saturday March 09, 2024 @11:40PM
(#39656755)
The last one I used was the Nvidia Jetson Nano. I'm sure there's a way of getting eMMC working on there, but after frying the fifth of sixth microSD card I threw my hands in the air and decided to go back to Intel.
I wonder if the NixOS tmpfs trick could be useful for something like this though...
Re:SD Express cards from Samsung promise faster-than-SATA sp...
by out_of_protocol on Sunday March 10, 2024 @11:56AM
(#39660159)
> Version 8.0 was announced on 19 May 2020, with support for two PCIe lanes with an additional row of contacts and PCIe 4.0 transfer rates, for a maximum bandwidth of 3938 MB/s.
Better make a backup copy of anything you put on an SD card because the failure rate is rather high in my experience.
I’m flummoxed!
probably common
Say what you want about spinning disk drives, but in my experience they tend to be a lot more resilient than SD cards.
For example, Raspberry Pi Compute Module 4 has variants with different sizes of eMMC.
Also, making the rootfs read-only goes a long way. In Raspberry Pi OS you can go into the raspi-config menu and choose Performance -> Overlay, something like that to make the rootfs readonly with an overlay fs that exists in ram only. Depending on your situation it may be useful to enable this. (Anything you actually want to persist you’ll have to write to another attached storage, or send over the network to somewhere else.)
I wonder if the NixOS tmpfs trick could be useful for something like this though...
so worse CF Express?
According to wiki it's two lanes at most