News for hackers. Stuff that matters.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by felipc on Thursday August 31, 2023 @06:16PM (#37344356)
The point about the newer Bialettis being cheaper is absolutely true. My mother has an old (>10 years) Moka that feels heavy and sturdy. A couple of years ago, after accidentally leaving it on the stove for too long, the bottom chamber and the filter basket got a permanent burnt coffee taste, and we bought a new one to replace it. That one was lighter and came with a significant thinner filter basket, which I also attributed to either being counterfeit or just they shipping cheaper versions of the product to Brazil.

Then, a couple of months ago, I was on vacation in Italy and decided to get a brand new one as a gift, directly from an official Bialetti store. To my surprise, the Mokas in the store felt exactly like the lower-quality one we had bought in Brazil. I didn't even buy the gift.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by C-x_C-f on Thursday August 31, 2023 @06:26PM (#37344427)
Bialetti has been on its last leg since 2015. They're drowning in debt and (in the best case scenario) are headed toward restructuring soon; in any case their future's not looking bright.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by tdullien on Thursday August 31, 2023 @06:35PM (#37344501)
Any insights into what went wrong?
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by C-x_C-f on Thursday August 31, 2023 @06:43PM (#37344568)
I'm not sure about the details. IMHO a contributing factor is that they're a company historically centered around manufacturing nearly indestructible appliances (even the newer mokas, however flimsier, don't break easily); once the market was saturated with the flagship product, there's only so much profit they could squeeze out of selling accessories and the like.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by whatshisface on Thursday August 31, 2023 @07:32PM (#37344931)
That hypothesis implies that they would wipe out the whole industry long before themselves, so it's probably not correct.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by C-x_C-f on Thursday August 31, 2023 @07:50PM (#37345042)
Not really, it remains true even when you take competition into account. Also, the rest of the industry isn't really playing the same game: all other companies producing moka pots are vastly more diversified. You have e.g. Alessi which fills the design-oriented niche (and has tons of other products), or the countless crummy knock-off factories which churn out all sorts of trash and just happen to machine moka pots once in a while. But only Bialetti kept all its eggs in one basket (at least until it was too late).
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by nerdponx on Thursday August 31, 2023 @08:43PM (#37345405)
I see a lot of Bialetti-branded cookware at local supermarkets. Things like nonstick frying pans. I actually bought one on a trip once when I needed a pan, and it's pretty good.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by ImprovedSilence on Thursday August 31, 2023 @09:09PM (#37345566)
their quality went way downhill and they shipped production overseas. I would love to have a nice bialetti moka express or a stainless version. i bought one probs 8 or 9 yrs ago, and it wasn't long before the tin lining separated, and the overall quality was crap. nothing like my mothers or any others I had used when i was introduced to them in italy. so i bought an alessi stainless steel made in italy pot at like 5x the price, and never looked back. but do i think a well built bialetti would be as good or better, they just dont make them well anymore…
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by q7xvh97o2pDhNrh on Thursday August 31, 2023 @11:01PM (#37346289)
I don't know if this is the ideal takeaway. Otherwise, we should all prioritize making our products flimsier and more expensive.

I think it's just a straightforward failure of creativity — or, even more plainly, a failure to understand their customer. They had a great product, which led to a loyal following — why not expand into adjacent markets?

The cruel irony is that their product was related to something that's extremely disposable. Why not get into the business of coffee beans? Why not partner with interesting coffee growers? Subscription businesses have been huge for decades, now — why not offer consumers the ability to buy an espresso bean subscription to go with their Mokapot, thereby generating a reliable recurring revenue stream?

A glimpse at their Wikipedia page [1] suggests they never even tried to branch out from the small, comfortable niche of cookware.

[1]: https://en.wikipedia.org/wiki/Bialetti

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by xcdzvyn on Friday September 01, 2023 @12:12AM (#37346714)
> Otherwise, we should all prioritize making our products flimsier and more expensive.

It's the view of many that this is indeed what most companies prioritize — I'm not saying it's true, but it doesn't seem to be a particularly fringe opinion. It's in the vein of enshittification.

Also, might I ask how you inserted that em-dash? A keyboard shortcut? It's interesting to see fancy typography online.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by peterhadlaw on Friday September 01, 2023 @12:24AM (#37346780)
One can look up the utf8 character for different typographical characters and copy and paste them in. On macOS at least, there is a keyboard shortcut for "emojis" (Cntl+Cmd+Space) and a little window shows up where you can search for emojis by name, and typographical characters by name (such as "em dash"). —pjh
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by xcdzvyn on Friday September 01, 2023 @12:45AM (#37346882)
> One can look up the utf8 character for different typographical characters and copy and paste them in.

Haha, yeah, that's what I usually do. But it's arduous enough for me not to bother for a HN comment. That's why I brought it up.

I love macOS' emoji picker thing, I wish there were something like it on Linux.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by butterknife on Friday September 01, 2023 @01:30AM (#37347163)
KCharSelect on KDE Plasma is a good alternative on Linux.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by js2 on Friday September 01, 2023 @10:29AM (#37351281)
Bring up the keyboard viewer widget on macOS and it will show you a live preview of what each key is... you can hold down the modifiers to see how the keys change.

https://support.apple.com/guide/mac-help/use-the-keyboard-vi...

Also—FWIW—an m-dash should not have whitespace on either side, at least, not in America. :-)

https://medium.com/typography/on-dashes-hyphens-and-other-im...

https://www.smashingmagazine.com/2011/08/mind-your-en-and-em...

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by cwillu on Friday September 01, 2023 @12:28AM (#37346802)
WinCompose is wonderfully intuitive for those on operating systems without one included stock.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by nor-and-or-not on Friday September 01, 2023 @12:42AM (#37346866)
In macOS you can also use:

option+minus for en-dash – and shift+option+minus for em-dash —

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by vladvasiliu on Friday September 01, 2023 @02:25AM (#37347497)
This can be reproduced on Linux using the "mac" layout. "option" is "level 3 shift" on Linux.

This works on X11, I haven't tried on Wayland.

On Windows it works, too, by grabbing the "us - mac" layout and using the alt-gr for the mac's option. I think this is the layout I use: https://github.com/adunning/Mac-Keyboard-Layouts-for-Windows

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by q7xvh97o2pDhNrh on Friday September 01, 2023 @02:14AM (#37347431)
> it doesn't seem to be a particularly fringe opinion.

You're right, sadly. But that's all the more reason to push back on it when it appears.

The true spirit of business should be to innovate to generate new profits. With the increasing wave of enshittification, it feels like a call for the Lorax of capitalism — someone has to speak for the importance of synergy.

> Also, might I ask how you inserted that em-dash? A keyboard shortcut? It's interesting to see fancy typography online.

I do it the way the other sibling comment here described: Ctrl+Cmd+Space to pull up the emoji-picker, then a couple arrow-keys to grab the em-dash, since it's usually in my "Frequently Used" section these days.

I decided a while ago to upgrade my punctuation when posting here. If I can't be pedantic about punctuation on HN, then where can I be? ;)

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by mdekkers on Friday September 01, 2023 @12:32AM (#37346825)
Here in Italy, Bialetti have nice outlets, much like Le Creuset does. The one in my town often has quite a few people in.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by piaste on Friday September 01, 2023 @06:47AM (#37349071)
> I don't know if this is the ideal takeaway. Otherwise, we should all prioritize making our products flimsier and more expensive.

That's an "is-ought" gap if I've ever seen one, sadly.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by quags on Friday September 01, 2023 @09:21AM (#37350468)
Brand protection may be one reason. Branding with a supplier who messes up in the coffee bean arena would hurt their reputation. Some business will throw ideas out and see what fits and maybe get a second really good product. Getting another product and being successful is hard enough which is why you see larger companies buying out others. It’s easier to buy and get a successful product from and existing than branching out and hitting another success.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by Cthulhu_ on Friday September 01, 2023 @04:20AM (#37348120)
But even if the market is saturated... is it really? I'm just an armchair expert in this case, but as far as I'm aware, there's not a coffee maker yet in every house; they will eventually break if overheated for example (I broke mine's rubber seal by putting it on the stove without water); and there's plenty of untapped markets out there yet.

That said, one person may buy one coffee maker and never need another one for the next decade or two, or pass it on to their children if it's really good. So what another comment said, them expanding into selling coffee as well for example, sounds like an idea.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by rob74 on Friday September 01, 2023 @04:47AM (#37348306)
If the rubber seal is damaged, you can simply replace it, you don't need to buy a new coffee maker. When people mention that newer coffee makers are cheaper and lower-quality, that's probably Bialetti trying to reach a larger market. I guess lots of people bought one and rarely if ever used it (I think even I have one somewhere, but don't ask me where).

As for expanding into selling coffee: that's natural for systems like Senseo or Nespresso, where you have custom pads/pods which you insert into the machine (not sure if third-party pad/pod makers have to pay a license fee to the "system provider"?), but Bialetti coffee makers work with any ground coffee. Might be an idea nevertheless, but not sure about the odds of success - I imagine most Italians already have their favorite brand of coffee and wouldn't suddenly switch to "Bialetti Coffee" just because they say it works best with their machines.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by johnnyApplePRNG on Thursday August 31, 2023 @06:49PM (#37344620)
They started making garbage quality products and their brand recognition plummeted? Look at the mukka express for example. [0]

They did one thing well and succeeded for decades and then tried to expand their business and failed miserably.

I have seen crap quality bialetti everything. They make pots and pans now too.

[0] https://www.amazon.ca/Bialetti-Express-Cow-Print-Stovetop-Ca...

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by Reason077 on Friday September 01, 2023 @09:32AM (#37350605)
> "Any insights into what went wrong?"

For one thing, things like Aeropress, Nespresso/Keurig, and cheaper/better home espresso and bean-to-cup coffee machines came along. People don't necessarily need to muck around with a Moka pot to make quality coffee at home any more.

And if you really do want a Moka pot, there's a lot of cheaper Chinese competitors now that look the part and actually have reasonable quality.

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by MarkMarine on Thursday August 31, 2023 @06:47PM (#37344598)
You see a similar thing with the glass chemex. There is a healthy market on eBay for pre-1980 models that were hand blown from great quality glass. My wife got me one for a gift and the difference in feel is remarkable. New ones feel fragile, this feels solid and strong. I’ve broken two of the newer versions and it’s dangerous. The old one is still standing strong in my house, surviving trips in my RV, and generally doing it’s job. I’m sure I sound like a curmudgeon but they don’t make stuff like they used to
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by anamexis on Thursday August 31, 2023 @06:53PM (#37344657)
They still make high quality ones, you just have to specifically get the "handblown series" (at 2-3x the price of the regular).

e.g. https://www.chemexcoffeemaker.com/eight-cup-handblown-series...

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by MarkMarine on Thursday August 31, 2023 @11:48PM (#37346602)
I am aware of those, but from what I understand the pre-80s ones are still better. I’m sure given a little time someone who is chemex expert will chime in and give a definitive comment.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by DougBTX on Friday September 01, 2023 @06:14AM (#37348843)
Even if the manufacturing process is the same, pre-80s ones may be better on average due to survivorship bias: the weaker ones broke already.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by ngcc_hk on Sunday September 03, 2023 @10:49AM (#37370876)
Could they be different ent … use say lead … like some lens use radioactive material.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by jghn on Friday September 01, 2023 @12:10AM (#37346704)
This feels like it might be similar to the difference between PYREX and pyrex [1]

[1] https://www.allrecipes.com/article/what-is-the-difference-be...

Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by rfrey on Thursday August 31, 2023 @10:20PM (#37346037)
James Hoffman gives a good history of Bialetti here: https://www.youtube.com/watch?v=upgQsA5kLAk including their sale to Faema and later to a cookware manufacturer, their numerous brushes with bankruptcy, and the stiff competition they've gotten from... even in Italy... pod machines.
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by sdfghswe on Friday September 01, 2023 @12:50PM (#37353244)
What did you expect? They're not exactly innovators, are they?
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by dingus9001 on Friday September 01, 2023 @09:25AM (#37350518)
Luckily for you bialetti doesn't have a monopoly on the design and you can just get a better quality one from another manufacturer
Re:X-ray CT scans of coffee equipment: Aeropress, Fellow ket... by ocean12 on Thursday September 07, 2023 @07:47PM (#37427296)
Serious Eats says Bialetti, even after all the changes, is still much better than anything on the market.

https://www.seriouseats.com/moka-pot-cheap-espresso-alternat...