Re:A DIY business card that runs Linux
by wkat4242 on Saturday June 03, 2023 @09:28AM
(#36176506)
Really cool! It would be a pretty thick card though I imagine, as the USB connector requires an above-average board thickness and some of the components are also quite thick (especially that winbond chip, looks like NAND flash).
Kudos on finding something that can run linux without having to deal with BGA by the way.
Re:A DIY business card that runs Linux
by thrtythreeforty on Saturday June 03, 2023 @09:56AM
(#36176702)
Author here! Trivia: I really, really wanted it to run Doom, so that I could have a section titled "But Does It Run Doom?". This is challenging with no screen; SDL has an experimental ASCII backend where in theory you could draw terminal graphics over SSH. But it refused to cross compile despite repeated efforts.
Re:A DIY business card that runs Linux
by qbasic_forever on Saturday June 03, 2023 @10:04AM
(#36176771)
What if you make a USB network device gadget and serve a mjpeg video stream to it that's the framebuffer/screen output? Web browsers or VLC on the host can show the video, and if you can get ffmpeg compiled and running on the device I think it has a fbdev input that can capture the framebuffer directly and likely convert it to a mjpeg stream.
Re:A DIY business card that runs Linux
by messe on Saturday June 03, 2023 @10:42AM
(#36177075)
More of a suggestion for a future design, but how about using DOOM's software rendering over X forwarding (potentially over SSH)? You'd need to have the card present itself as a network interface, which would add to the complexity and cost however.
What's the highest baud rate the serial interface supports? You could theoretically get PPP over serial working, but I suspect at best you could only manage a few frames per second. 320x200x4bpp at 1fps requires a 256k baud rate minimum, and that's just streaming the video, without any overhead—I suppose you could apply compression: ssh -C with the "none" cipher; or just compress each frame as a PNG, but I'm thinking outloud—this would probably involve writing your own renderer.
Re:A DIY business card that runs Linux
by antoinealb on Saturday June 03, 2023 @12:10PM
(#36177817)
With the USB gadget Driver in Linux you can have the existing USB Hardware enumerate as a USB Ethernet adapter without too much config work so that would not add much to the BoM :)
Re:A DIY business card that runs Linux
by TZubiri on Saturday June 03, 2023 @10:26PM
(#36182474)
But can't the computer boot from usb? Then you could just modify the display memory.
The challenge would be figuring out what the display memory is, you'd need a strong knowledge of display standards.
Re:A DIY business card that runs Linux
by omneity on Saturday June 03, 2023 @10:16AM
(#36176864)
I am not familiar with the rules for names like this. If you don't mind me asking, how does it work? Are your first male descendants expected to be named the same until one of them changes his mind?
Re:A DIY business card that runs Linux
by thrtythreeforty on Saturday June 03, 2023 @02:07PM
(#36178994)
I'd have to check to be certain, but I am pretty sure we didn't put it on birth certificates. It's convention only - some businesses (notably banks) have a "suffix" field to help disambiguate customers, but many of them are drop-downs which stop at "IV" for some reason.
What really makes me feel like royalty is not the name, it's the throne room I had installed in my summer home in the Bahamas. That and requiring everyone I meet to call me "sire." (/s)
Re:A DIY business card that runs Linux
by thrtythreeforty on Saturday June 03, 2023 @02:10PM
(#36179026)
My family's tradition is that all the men share a middle name, and all the women share a middle name, so there's still name inheritance even for younger siblings! (There's an OOP joke in here somewhere.)
Amusingly, my wife also has the same middle name as the women in my family, so the tradition is likely to continue.
Re:A DIY business card that runs Linux
by PragmaticPulp on Saturday June 03, 2023 @10:44AM
(#36177088)
This is from a professional embedded systems engineer who is presumably only giving these to prospective clients because, obviously, they’re more expensive than regular business cards.
If you can’t bring yourself to connect a USB device from your embedded systems engineer then you shouldn’t be working with that person. You’re also going to have a difficult time working with them on just about any product.
Maybe just appreciate this for what it is: A novel business card.
Re:A DIY business card that runs Linux
by indrora on Saturday June 03, 2023 @01:46PM
(#36178778)
I had a run of Moo business cards made at one point, costing over $1/ea.
As a gimmick for highly likely prospectives (or, alternately, a thank you for current clients) this is absolutely at a price point of "have 50 spun via pick and place" to have on hand.
Re:A DIY business card that runs Linux
by NoZebra120vClip on Saturday June 03, 2023 @10:17AM
(#36176878)
I have some business cards that are so valuable, I can't give them away.
I was attending a conference with some vendor booths, and while it wasn't anything like a job fair, I thought I'd try my luck at pitching myself as a prospective hire. So I went to the most IT-oriented vendor that I could find, introduced myself, and proudly presented my solid plastic CompTIA A+ certification.
The good fellow thanked me and promptly pocketed it! It all went downhill from there as I had to explain that was a credential and not a calling-card, so I got it back, and definitely didn't get hired for anything!
Re:A DIY business card that runs Linux
by halflings on Saturday June 03, 2023 @10:34AM
(#36177023)
It's not necessarily why they didn't reach out, but waiving certifications and other random credentials (e.g. completion of some Coursera course) is usually not the best strategy to get hired.
Talking about concrete work you've done (of interest to the company) is much more convincing.
Re:A DIY business card that runs Linux
by MountainMan1312 on Saturday June 03, 2023 @12:43PM
(#36178156)
Unfortunately for me I think my "concrete work" is what's keeping me from looking like an attractive employee to tech firms. Somehow they don't understand how construction and software development are extremely similar.
Re:A DIY business card that runs Linux
by thih9 on Saturday June 03, 2023 @10:27AM
(#36176967)
If it’s in a conference setting, perhaps a solution would be to add some cheap retro computer as part of a booth, so that people could immediately insert the business card and play with it.
Re:A DIY business card that runs Linux
by xg15 on Saturday June 03, 2023 @10:29AM
(#36177000)
I had heard about that project before and was wondering how he managed to emulate USB devices on linux to a host system. TIL about the Linux Gadget framework: http://www.linux-usb.org/gadget/
Re:A DIY business card that runs Linux
by russellbeattie on Saturday June 03, 2023 @02:18PM
(#36179106)
I'm surprised that Apple or Google hasn't integrated a business card app of some sort and accompanying file format. Like a digital rolodex. I don't need my plumber, accountant, dry cleaner, or a zillion random people I meet at a tech conference in my contacts/address book, even if they're grouped. Exchanging info by giving them my phone number/email is usually a lot more than I want, and URLs just get lost. A QR code or a peer-to-peer transfer with an open, stylized/formatted, .vcf style file that's meant for a business related info app seems like a non brainer.
I want to have a conversation with the digital equivalent of:
> "That's bone. And the lettering is something called Silian Grail."
> "It's very cool, Bateman, but... Egg shell, with Roman."
> Now a third broker pulls out his card. It looks exactly like the first two, except it reads TIMOTHY BRICE: VICE PRESIDENT.
> "Raised lettering, pale nimbus."
> "Impressive", Bateman mutters. "Let's see Paul Allen's card."
> The room falls silent as the third broker produces an absent colleague's card.
> «Look at that subtle colouring. The tasteful thickness.»
Might make for interesting reading.
Kudos on finding something that can run linux without having to deal with BGA by the way.
So, sadly it does not in fact run Doom.
What's the highest baud rate the serial interface supports? You could theoretically get PPP over serial working, but I suspect at best you could only manage a few frames per second. 320x200x4bpp at 1fps requires a 256k baud rate minimum, and that's just streaming the video, without any overhead—I suppose you could apply compression: ssh -C with the "none" cipher; or just compress each frame as a PNG, but I'm thinking outloud—this would probably involve writing your own renderer.
Mission accomplished! Well done, sir.
(Also, does it make your feel like royalty?)
What really makes me feel like royalty is not the name, it's the throne room I had installed in my summer home in the Bahamas. That and requiring everyone I meet to call me "sire." (/s)
Also, continuing similar tradition, I hope you've reserved mail addresses ending with 6,7 and so on for future generations.
Amusingly, my wife also has the same middle name as the women in my family, so the tradition is likely to continue.
It can be exchanged for goods and services.
If you can’t bring yourself to connect a USB device from your embedded systems engineer then you shouldn’t be working with that person. You’re also going to have a difficult time working with them on just about any product.
Maybe just appreciate this for what it is: A novel business card.
As a gimmick for highly likely prospectives (or, alternately, a thank you for current clients) this is absolutely at a price point of "have 50 spun via pick and place" to have on hand.
I was attending a conference with some vendor booths, and while it wasn't anything like a job fair, I thought I'd try my luck at pitching myself as a prospective hire. So I went to the most IT-oriented vendor that I could find, introduced myself, and proudly presented my solid plastic CompTIA A+ certification.
The good fellow thanked me and promptly pocketed it! It all went downhill from there as I had to explain that was a credential and not a calling-card, so I got it back, and definitely didn't get hired for anything!
Talking about concrete work you've done (of interest to the company) is much more convincing.
Author is probably a millionaire by now.
https://en.wikipedia.org/wiki/Bootable_business_card
I want to have a conversation with the digital equivalent of:
> "That's bone. And the lettering is something called Silian Grail."
> "It's very cool, Bateman, but... Egg shell, with Roman."
> Now a third broker pulls out his card. It looks exactly like the first two, except it reads TIMOTHY BRICE: VICE PRESIDENT.
> "Raised lettering, pale nimbus."
> "Impressive", Bateman mutters. "Let's see Paul Allen's card."
> The room falls silent as the third broker produces an absent colleague's card.
> «Look at that subtle colouring. The tasteful thickness.»
> His face creases in horror.
> «Oh my God. It even has a watermark.»