News for hackers. Stuff that matters.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by hulitu on Friday March 03, 2023 @02:49AM (#35006920)
> Are any other manufacturers pushing as hard here?

Why would they. Most of those things are not sustainable.

You don't want alluminium wires in your car.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by TheLoafOfBread on Friday March 03, 2023 @03:08AM (#35007034)
It is really funny when West is discovering magic of cheap aluminum for wires, while former Eastern Block is ripping aluminum wires from walls because it is no.1 reason for fires.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by jasongill on Friday March 03, 2023 @07:37AM (#35008728)
Aluminum is perfectly fine as a conductor, and perfectly safe. In the USA, we've used aluminum for most of our power transmission and distribution since the beginning of "the grid". Everything from the power plant to the meter at your home is connected with aluminum.

Where aluminum causes fires is due to the fact that it expands and contracts more than copper does, and it can oxidize and corrode when not properly cared for (for example, when dissimilar metals are used, or when exposed aluminum wire ends are not properly coated).

We can assume that someone at Tesla is familiar with the properties of aluminum and can insure that they are using the right connectors to mitigate these issues. (or at least, we can hope)

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by axus on Friday March 03, 2023 @08:08AM (#35009062)
Perhaps the decrease in reliability was pitched internally as a way to sell more Teslas in the future?
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by brookst on Friday March 03, 2023 @08:43AM (#35009499)
Yes, no class action suit destroying the company could ever come from that little conspiracy.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by nine_k on Friday March 03, 2023 @08:52AM (#35009617)
Unlikely: buying a replacement car because your previous one burst into flames usually involves staying away from the previous brand.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by tylerag on Friday March 03, 2023 @11:26AM (#35011649)
The other problem in house wiring is that when you tighten down the screw to attach the aluminum wire to the terminal, the aluminum work hardens, and expansion/contraction/vibration will cause it to break.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by chollida1 on Friday March 03, 2023 @07:51AM (#35008888)
> It is really funny when West is discovering magic of cheap aluminum for wires, while former Eastern Block is ripping aluminum wires from walls because it is no.1 reason for fires.

Aluminum was used for a short time in the west for household wiring and was quickly outlawed.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by zip1234 on Friday March 03, 2023 @08:38AM (#35009422)
It's commonly used for the main wire into homes. As long as it is sized properly and uses the appropriate connections it is fine.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by newaccount74 on Friday March 03, 2023 @07:36AM (#35008717)
I would assume those "high voltage conductors" are more like rigid bus bars, and not flexible wires.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @04:07PM (#35015000)
Tesla does use traditional stranded copper too, but the aluminum I referenced is indeed a rigid bus bar.

https://news.ycombinator.com/item?id=35014013

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by brookst on Friday March 03, 2023 @08:48AM (#35009569)
> You don't want alluminium wires in your car

Why not? I^2*r says that running 75% less current will generate 94% less heat.

Existing copper wires would be a disaster if cars ran on a 3V system. Aluminum at 48V will be fine, as long as it’s sized appropriately the same way copper is today.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by KaiserPro on Friday March 03, 2023 @09:03AM (#35009762)
> Why not? I^2*r says that running 75% less current will generate 94% less heat.

Thats not the argument, you can do that now with copper cables.

Aluminium is a good conductor, but it is reactive, brittle and not as malleable as copper.

also, copper has almost half the resistance per meter than aluminium. So even for solid bus bars, it doesn't make that much sense, unless you have structural bus bars.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by eimrine on Friday March 03, 2023 @09:24AM (#35009978)
> copper has almost half the resistance per meter than aluminium.

But 4 times the weight

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by brookst on Friday March 03, 2023 @09:56AM (#35010382)
Most car wiring harnesses are affixed to structural members and don’t need to flex.

And twice the resistance doesn’t matter. So you go one gauge bigger. If the material is cheaper, more available, and suitable, that’s fine. We don’t insist on gold wires because they’re “better” than copper.

It’s all tradeoffs. I don’t see a reason to be philosophically opposed to aluminum other than “it’s possible to do it wrong”, which is of course also true for copper.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by KaiserPro on Friday March 03, 2023 @02:24PM (#35013879)
> cheaper, more available, and suitable

Indeed, but automotive wiring is subject to intense and persistent vibration and heat cycles. so all those ties become stress points for fatigue to cluster around.

I'm not saying its never a good idea to use an aluminium wire loom, but I'm struggling to find a situation where its required

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:36PM (#35014013)
I posted clarification and sourcing above.[0]

It's not really the flexible thing you picture with the word "loom." The solid aluminum conductor is inside an aluminum tube (mounted to the body), with insulation between.

These are thick high voltage conductors. I'm sure Tesla did their homework on flex and fatigue.

[0] https://news.ycombinator.com/item?id=35013667

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:04PM (#35013667)
>Aluminium is a good conductor, but it is reactive, brittle and not as malleable as copper

The place we saw this used was for fixed rigid bus bars, notably the "cable" from the charge port to the battery.[0]

Previously they used traditional stranded copper. Now it's a solid aluminum conductor, wrapped in insulation and protected by an outer aluminum tube.

>copper has almost half the resistance per meter than aluminium

That's why I mentioned conductivity-to-weight, which is the more critical metric. Copper is over 3x as dense, at 9.0 g/cm³ vs 2.7 g/cm³ for aluminum.

It doesn't hurt that aluminum is cheaper and far more abundant.

[0] https://m.youtube.com/watch?v=hY9cxyvUu6I&t=1115s

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by cptskippy on Friday March 03, 2023 @09:32AM (#35010070)
The switch to 48v is for the low voltage which is normally 12v. The high voltage system is the 300v from the pack.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by albrewer on Friday March 03, 2023 @11:04AM (#35011361)
Aluminum is really easy to fatigue and fracture. In a car that is vibrating and jostling all the time, this could happen surprisingly quickly.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by dv_dt on Friday March 03, 2023 @11:14AM (#35011464)
Airplanes flying for decades are made of aluminum.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by Snoozus on Friday March 03, 2023 @12:30PM (#35012611)
Their cables?
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:47PM (#35014140)
Tesla isn't using aluminum "cables" either. They use the material for large rigid bus bars.

https://news.ycombinator.com/item?id=35013667

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by albrewer on Monday March 06, 2023 @10:26AM (#35042103)
Comparing car design and operating conditions to that of airplanes is kind of silly. The operating conditions of aircraft are far better defined and restricted.

Additionally, aircraft airframes are regularly inspected and fully radiographed at certain intervals. Components that develop flaws are changed out when the flaws are detected. The same is not true of cars.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by linsomniac on Friday March 03, 2023 @09:04AM (#35009773)
>You don't want alluminium wires in your car.

Why not?

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by jfengel on Friday March 03, 2023 @10:53AM (#35011197)
I assume, for the same reason you don't want them in your house. It expands differently from copper as it warms, and the connections can loosen.

If Tesla has switched to aluminum I imagine they've found a way to fix that. Possibly by making the entire electrical system out of aluminum, so that it all expands the same way, or possibly a connector designed to avoid that.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by linsomniac on Friday March 03, 2023 @06:48PM (#35016559)
The primary reason you don't want aluminum in your house is that homegamers will improperly do repairs, primarily replacing devices (receptacles, switches) with ones that are not rated CO/ALR rated. I doubt that failure will be as likely in the cars.

Properly terminated, there is no problem with aluminum wiring in your house. As another replier mentioned, most houses do have aluminum wiring in the run to the house and the run from the meter to the panel, and sometimes in the larger runs like stove and dryer.

It's also worth noting that the newer aluminum formulas like Southwire SIMpul, are not like the old aluminum like was installed in my house in the early '70s. But, buyers are still gunshy from the '70s, so copper is generally preferred

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by rr888 on Friday March 03, 2023 @10:09AM (#35010567)
Copper costs 6x Aluminium and is much rarer + in a car you want to be as lightweight as possible. You need a good reason to avoid it.