News for hackers. Stuff that matters.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by brookst on Friday March 03, 2023 @08:48AM (#35009569)
> You don't want alluminium wires in your car

Why not? I^2*r says that running 75% less current will generate 94% less heat.

Existing copper wires would be a disaster if cars ran on a 3V system. Aluminum at 48V will be fine, as long as it’s sized appropriately the same way copper is today.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by KaiserPro on Friday March 03, 2023 @09:03AM (#35009762)
> Why not? I^2*r says that running 75% less current will generate 94% less heat.

Thats not the argument, you can do that now with copper cables.

Aluminium is a good conductor, but it is reactive, brittle and not as malleable as copper.

also, copper has almost half the resistance per meter than aluminium. So even for solid bus bars, it doesn't make that much sense, unless you have structural bus bars.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by eimrine on Friday March 03, 2023 @09:24AM (#35009978)
> copper has almost half the resistance per meter than aluminium.

But 4 times the weight

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by brookst on Friday March 03, 2023 @09:56AM (#35010382)
Most car wiring harnesses are affixed to structural members and don’t need to flex.

And twice the resistance doesn’t matter. So you go one gauge bigger. If the material is cheaper, more available, and suitable, that’s fine. We don’t insist on gold wires because they’re “better” than copper.

It’s all tradeoffs. I don’t see a reason to be philosophically opposed to aluminum other than “it’s possible to do it wrong”, which is of course also true for copper.

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by KaiserPro on Friday March 03, 2023 @02:24PM (#35013879)
> cheaper, more available, and suitable

Indeed, but automotive wiring is subject to intense and persistent vibration and heat cycles. so all those ties become stress points for fatigue to cluster around.

I'm not saying its never a good idea to use an aluminium wire loom, but I'm struggling to find a situation where its required

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:36PM (#35014013)
I posted clarification and sourcing above.[0]

It's not really the flexible thing you picture with the word "loom." The solid aluminum conductor is inside an aluminum tube (mounted to the body), with insulation between.

These are thick high voltage conductors. I'm sure Tesla did their homework on flex and fatigue.

[0] https://news.ycombinator.com/item?id=35013667

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:04PM (#35013667)
>Aluminium is a good conductor, but it is reactive, brittle and not as malleable as copper

The place we saw this used was for fixed rigid bus bars, notably the "cable" from the charge port to the battery.[0]

Previously they used traditional stranded copper. Now it's a solid aluminum conductor, wrapped in insulation and protected by an outer aluminum tube.

>copper has almost half the resistance per meter than aluminium

That's why I mentioned conductivity-to-weight, which is the more critical metric. Copper is over 3x as dense, at 9.0 g/cm³ vs 2.7 g/cm³ for aluminum.

It doesn't hurt that aluminum is cheaper and far more abundant.

[0] https://m.youtube.com/watch?v=hY9cxyvUu6I&t=1115s

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by cptskippy on Friday March 03, 2023 @09:32AM (#35010070)
The switch to 48v is for the low voltage which is normally 12v. The high voltage system is the 300v from the pack.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by albrewer on Friday March 03, 2023 @11:04AM (#35011361)
Aluminum is really easy to fatigue and fracture. In a car that is vibrating and jostling all the time, this could happen surprisingly quickly.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by dv_dt on Friday March 03, 2023 @11:14AM (#35011464)
Airplanes flying for decades are made of aluminum.
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by Snoozus on Friday March 03, 2023 @12:30PM (#35012611)
Their cables?
Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by schiffern on Friday March 03, 2023 @02:47PM (#35014140)
Tesla isn't using aluminum "cables" either. They use the material for large rigid bus bars.

https://news.ycombinator.com/item?id=35013667

Re:Tesla's Next-Gen Electric Motors Will Get Rid of Rare Ear... by albrewer on Monday March 06, 2023 @10:26AM (#35042103)
Comparing car design and operating conditions to that of airplanes is kind of silly. The operating conditions of aircraft are far better defined and restricted.

Additionally, aircraft airframes are regularly inspected and fully radiographed at certain intervals. Components that develop flaws are changed out when the flaws are detected. The same is not true of cars.