Put an ESP32[0] in the space heater. Detect temperature, humidity, barometric pressure. Detect human presents, identify if it is human versus dog. Provide Zigbee communication to Home Assistant. Send alert if dangerously excessive electricity is used, and shut down power to device. Check external weather to make sure water pipes do not freeze when away, and keep heat sufficiently high to prevent freezing but optimize for lowest power usage. Check every 15 seconds. Write automation that knows when away, on vacation, or price of electricity is too high turning it off, on, or throttling to reduce consumption. Reduce grid usage, by heating during best solar panel power generation.
And, then you just began. This is how Home Assistant used. :)
Perfect mix for us. Not (much) to break in the automation.
And, it is fun.
I tried, I couldnt take it. Between doing things the most botched way possible and spending the most money possible (My 4 billion $$$$ home theater system clickbait) I couldnt take it anymore. Its a low form of scam / con when you use your home renovation as a tax writeoff and "content".
Christmas/holiday lights, mood lighting, under counter lighting, all that is controlled by automation.
Now, primary lighting for the room, there's a switch on the wall for that.
It is still adding one extra component that could fail, but it was at least immune to "controller died, nothing works" problem.
The cloud is always someone else's computer, the cloud always costs someone $, and over time, there will be less incentive to provide it.
As for the legality, when you take stuff that you bought for the company and later use it for personal things, you need to "pay" the company for it, you can't just write if off.
LTT is like 95% entertainment 5% actually somewhat informative.
In terms of the deduction, I doubt he’s committing actual tax fraud if for no other reason than he’s so public a figure.
I loved the idea of running my PC elsewhere in the house, so I looked up both the USB and Thunderbolt fiber solutions he recommended.
$800.
His previous one was flagged by anti-cheat due to it being VM-based.
The advantage of a fully local, self-contained system is that you can treat it as an appliance - you don't have to update or tinker with it continuously. There's no reason for it to update or brick itself.
A friend of mine still has a Home Assistant set up from now almost 3 years ago running with no updates or anything - it just acts like a PLC to manage some lights, switches and toggles heating on/off based on window sensors. Nobody has to mess with it and it just works in the background.
Do people want this? Maybe I want both warmth and fresh air in the room? And I foresee the day where the window sensor is faulty. I'm shivering in bed as I have an argument with my furnace about which one of us should be in charge of setting the temperature in my bedroom.
Hass just sends on/off commands to a self-contained thermostat in response to window sensor state change events. If it fails, you can still manually go to the thermostat and set it to whatever you want.
For a more advanced use case I’ve recently set it up so that the thermostat logic is within HASS. An automation driven by a binary switch helper then switches the thermostat to a fixed hot or cold value for heat and AC. Then I can feed the HASS thermostat with whatever temperature sensor data I want, like an average of multiple sensors around the house. All this is totally optional though if you just want to control the thermostat from within HASS.
https://www.home-assistant.io/integrations/venstar/
I've not used it (I installed one because I wanted scheduling and liked that it had further possibilities and wasn't overly expensive).
People have also built a variety of presence sensors for beds. With pressure sensors and such. Or if you have a Sleep Number bed, it also has presence detection. You could also do things like detecting phone is in the room and plugged in as a rough equivalent for presence of the person.
If there was a need for a UI I'd probably enable the HomeKit Bridge extension and let them control it via HomeKit (with only specific entities whitelisted) so that 1) they don't have to suffer through the eyesore that is Material Design and 2) don't get confused by a lot of the internal, read-only entities.
Maybe a heat pump is more efficient (about the same as gas, depending on climate) but needs more capital than $25.
That seems like a complex question to answer.
Electric heating is more efficient than gas heating (100% Vs. 95%), but electricity costs more than natural gas, taking out any benefit. But that isn't even what makes this complicated, if they're running their natural gas whole-home system to heat a single room, how does THAT compare to a more costly room heater?
Heat pumps are definitely more efficient (e.g. 300%) but cost $1K for a single mini-split, and installation costs/permitting is expensive. $5K isn't unrealistic for just one installed, maybe $2K~ DIY (assuming you can even pull the permit yourself for both electric and HVAC).
I caved and watched - as this triggered my interest. It was actually worse than I expected. They really have 'designed' the system to be broken, and they were just pretending they couldnt figure out how to make it work, and had been sat in a freezing house for weeks ... right?
>> In my house, our nursery both cooled faster and heated faster than any other room in the house. The thermostat (a Nest) controlled the boiler from the living area, and would often turn off the boiler while the nursery was still chilly.
Nerd solution: integrated sensors. Smart home devices. Complex multi-zone heating. Issue never really goes away. Each time something is updated/bricked the entire system must be revisited. (See LLT tech tips videos about Linus's new house.)
Actual solution: An electric space heater available at any Walmart for 25$. Built in thermostat. Problem solved.