News for hackers. Stuff that matters.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by MontyCarloHall on Wednesday October 12, 2022 @03:17PM (#33181703)
>cables that can carry megawatts of energy are probably pretty heavy

Required cable thickness (and thus weight) is proportional to current, not voltage. Conductors to carry megawatts of electricity could be fairly light as long as the voltage is extremely high and the amperage relatively low.

Re:1.461 seconds from 0 to 100km/h: students break accelerat... by jvanderbot on Wednesday October 12, 2022 @03:41PM (#33181990)
And magnetic force is a function of current, and magnetic force is what drives wheels. Technically you are correct, but thick cables are actually needed to do lots of translation from electricity to movement.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by willmadden on Wednesday October 12, 2022 @03:58PM (#33182217)
I don't think there's a problem with cable weight with electric motors. Production EV's today have ridiculous amounts of torque and don't require prohibitively heavy cables.

The issue with acceleration using wheels is gravity. You are limited to 1g, the downforce on the wheels, which you use for traction to push the vehicle forward. Spoilers increase the downforce on the vehicle beyond 1g, but the energy required to do that is proportional to the drag on the spoiler.

Short of a rocket engine, the way to accelerate beyond 1g with a wheeled vehicle is to have a downforce fan. That can be powered by combustion or by electricity. I don't know which would offer the highest power to weight ratio.

Re:1.461 seconds from 0 to 100km/h: students break accelerat... by lazide on Wednesday October 12, 2022 @06:05PM (#33184207)
I’m not sure having a ‘reverse Helicopter’ on the back of your vehicle really qualifies as ‘ground vehicle’ at that point. Especially if it’s providing enough force to literally drive upside down on a ceiling somewhere.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by stefs on Wednesday October 12, 2022 @06:55PM (#33184834)
it's as ground as can be, short of a tunneling machine maybe.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by et2o on Wednesday October 12, 2022 @09:49PM (#33186213)
This was the basis of a very famous F1 car in the 1970s. It was ultimately banned.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by benj111 on Thursday October 13, 2022 @05:17AM (#33188886)
What's the down force for an F1 car? Are they not ground vehicles?
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by solidr53 on Wednesday October 12, 2022 @06:48PM (#33184749)
BEV used to have around 80kg of copper [1], nowadays, manufacturers are moving towards 800V architecture attempting to cut the weight in half.

I also feel like 800V cars also maintain their maximum power better on lower SoC than 400V systems.

[1] https://www.copper.org/publications/pub_list/pdf/A6192_Elect...

Re:1.461 seconds from 0 to 100km/h: students break accelerat... by mannykannot on Wednesday October 12, 2022 @07:16PM (#33185061)
> Short of a rocket engine, the way to accelerate beyond 1g with a wheeled vehicle is to have a downforce fan.

This electric vehicle is accelerating to 100kph (~28 m/s) in less than 1.5 seconds, which is an average acceleration approaching 2g, if I am not mistaken.

Re:1.461 seconds from 0 to 100km/h: students break accelerat... by usrusr on Thursday October 13, 2022 @06:53AM (#33189420)
If we are already what-if-ing with wired power delivery, just skip the pantograph and look at what wire-guided missiles do: they have their data lines on a spool, unrolling as they go. For power you certainly wasn't thicker wires, and while you're at it, you'll certainly power the unrolling of the spool instead of just dragging it to spin up. Then if the spool unrolling is for some reason faster than the wheels, the wire will serve as reaction mass, pushing the vehicle. Now we have what's essentially a copper rocket that isn't constrained by downforce and tire grip at all.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by kroeckx on Wednesday October 12, 2022 @04:49PM (#33182897)
For the torque, you can use a low current using more windings, which has the same effect of having a higher current with less windings.

The acceleration you can reach is mostly limited by the peak current and the force constant, but the maximum speed you can reach at that acceleration is mostly limited by the voltage you have available because of the back-EMF. A simplified formula is that the voltage you need is R * I + v * BEMF. The higher the voltage is, the better the insulation between the windings needs to be. You need to find a balance between the different properties.

Re:1.461 seconds from 0 to 100km/h: students break accelerat... by happyopossum on Wednesday October 12, 2022 @04:53PM (#33182958)
More windings = more weight - you're gonna pay for it somewhere.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by sudosysgen on Wednesday October 12, 2022 @06:02PM (#33184158)
Sure but the wiring is thinner, thereby somewhat equalising.
Re:1.461 seconds from 0 to 100km/h: students break accelerat... by omegalulw on Thursday October 13, 2022 @02:43AM (#33187983)
This seems...wrong?

Let's say you can control voltage, cross section area A.

Now, you want a constant power across a load P = V * I.

Your net resistance R is C + D * L / A where C and D are constants and L is your cable length.

I is proportional go V * A / (C * A + E) where E is also a constant.

So your load power is proportional V^2* C * A / (C * A + E) which is proportional to V^2 * A / (A + F) where F is also a constant.

With a large "enough" A, this is effectively V^2. With a small A, this is V^2 * g where g is A / F. So the smaller the area you have the more power you are wasting (roughly equal to V^2 * (1-g) which is heat in the wires).

So the smaller area you have, the less efficient your power delivery. And juicing up your source power is a lot more expensive than juicing up your source voltage.