Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by lazide on Wednesday October 12, 2022 @06:05PM
(#33184207)
I’m not sure having a ‘reverse
Helicopter’ on the back of your vehicle really qualifies as ‘ground vehicle’ at that point. Especially if it’s providing enough force to literally drive upside down on a ceiling somewhere.
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by stefs on Wednesday October 12, 2022 @06:55PM
(#33184834)
it's as ground as can be, short of a tunneling machine maybe.
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by et2o on Wednesday October 12, 2022 @09:49PM
(#33186213)
This was the basis of a very famous F1 car in the 1970s. It was ultimately banned.
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by benj111 on Thursday October 13, 2022 @05:17AM
(#33188886)
What's the down force for an F1 car? Are they not ground vehicles?
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by solidr53 on Wednesday October 12, 2022 @06:48PM
(#33184749)
BEV used to have around 80kg of copper [1], nowadays, manufacturers are moving towards 800V architecture attempting to cut the weight in half.
I also feel like 800V cars also maintain their maximum power better on lower SoC than 400V systems.
[1] https://www.copper.org/publications/pub_list/pdf/A6192_Elect...
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by mannykannot on Wednesday October 12, 2022 @07:16PM
(#33185061)
> Short of a rocket engine, the way to accelerate beyond 1g with a wheeled vehicle is to have a downforce fan.
This electric vehicle is accelerating to 100kph (~28 m/s) in less than 1.5 seconds, which is an average acceleration approaching 2g, if I am not mistaken.
Re:1.461 seconds from 0 to 100km/h: students break accelerat...
by usrusr on Thursday October 13, 2022 @06:53AM
(#33189420)
If we are already what-if-ing with wired power delivery, just skip the pantograph and look at what wire-guided missiles do: they have their data lines on a spool, unrolling as they go. For power you certainly wasn't thicker wires, and while you're at it, you'll certainly power the unrolling of the spool instead of just dragging it to spin up. Then if the spool unrolling is for some reason faster than the wheels, the wire will serve as reaction mass, pushing the vehicle. Now we have what's essentially a copper rocket that isn't constrained by downforce and tire grip at all.
The issue with acceleration using wheels is gravity. You are limited to 1g, the downforce on the wheels, which you use for traction to push the vehicle forward. Spoilers increase the downforce on the vehicle beyond 1g, but the energy required to do that is proportional to the drag on the spoiler.
Short of a rocket engine, the way to accelerate beyond 1g with a wheeled vehicle is to have a downforce fan. That can be powered by combustion or by electricity. I don't know which would offer the highest power to weight ratio.