USB Energy Provisioning Aggregate Network 4.3 Revision 11 Gen3x4 48gbps SuperCharge-C.
[1]: https://cdn.arstechnica.net/wp-content/uploads/2022/09/USB-p...
> Inline USB ultracapacitor banks seem like a reasonable product too though.
I actually saw just that in a GreatScott Youtube video about Aliexpress gadgets just the other day[1]. Not sold as a UPS, but rather a power filter or buffer.
Weighed more than my MacBook, but indispensable. Too bad they don't make them anymore.
It's on the line voltage side like any other UPS, so not as efficient as you could be with a solution that didn't have to convert AC to DC then back to AC then to DC again in the brick. But with Apple's proprietary charging connector soldered to the device end of the brick, what else can you do about it?
In short, it will take whatever it can get and boost.
Kinda inefficient to run 2x boosts, but it does the job.
Will buy you time during use and slowly charge while closed.
Insanely easy to believe. The role of UPS is to prevent data loss when power fails. If something is powered by USB-C it almost always already have its own battery preventing from that.
The only devices that are not are stuff like say, raspberry Pi
Also, there literally are devices like that, just aimed more at stuff like camping, so much bigger battery, usually an inverter on board and solar input.
> Hopefully USB will give us standards for power banks someday so you can get certified ones with a defined form factor and behavior.
If it will be like USB-PD then it will be insanely overcomplicated and nobody will be able to get it right.
That's a very narrow minded approach to both UPSs and items using USB as their power plug imo.
A UPS isn't just "to prevent data loss when power fails." It's also to keep critical (for home, not DC) things running in the event of power outages. Current uses for USB-C power banks as UPSs I have (or have recommended to friends) that aren't "to prevent data loss".
- Power bank running as a UPS on (a few critical) wireless security cameras (that use USB-C for power).
- Power bank running as a UPS on my cats water fountain (uses USB for power), if the power goes out she still needs to drink water, and I may not be home to put down a standard bowl.
- Friend has a baby monitor and took my idea of using a USB power bank as a battery backup on the camera and monitor so that if his power goes out he can still keep tabs on his child. (no sense waking her up to move her if he doesn't have to)
That's a moot point though, IMO. Like if you're travelling, wouldn't it be nice if your charger and your battery bank were the same device? Just because it doesn't have the same specific utility as a UPS, doesn't mean that it's not useful in other ways.
Like this?
https://www.anker.com/products/a1621
There’s a lot of these devices. “Wall plug power bank” worked as good keywords for me on Amazon.
These could still be different in operation than a UPS though
Raspberry Pis are common though. They've taken over like half of DIY electronics and home servers, for a good reason, everything else is way more hassle and less supported.
Not sure why you say PD is overcomplicated. Until you get above 30 to 60w where not everything supports it, stuff just works. Their only big mistake I see is not keeping the 12v power tier.
WAY too many things run on 12v and losing the ability to easily run legacy stuff sucked. But they'll fix that when 12v PPS trigger modules are available, for some reason they are not currently.
Or IP cams, I have some here that sounds really benefit but I'm worried about the safety of a powerbank plugged in 24/7 that's not meant for it.
I could see it being a thing. A niche thing but a thing.
These kind of comments are surprisingly common on HN and annoy me slightly.
Yes, most phones and laptops do not have user replaceable batteries anymore. It's a pity. That does not mean a dead battery is a justification to throw away fine equipment.
Any phone repair shop or computer shop can replace batteries. They usually have all the equipment and spare parts, even more so for popular Apple devices. It usually takes half an hour and costs way less than replacing the whole device.
I always recommend that to friends and family because most of them are not even aware this is possible. They usually thank me later saying how painless and affordable it was to give a second life to their devices.
A good way to keep these devices in use would be with an external battery, and one built into the power adapter would be very convenient. Just an hour of power would be enough to move around to meetings without multiple reboots.
And that's assuming you can even find a decent replacement battery.
Now, if you said the keyboard...
I can see how someone would call that half the laptop.
Assuming the default failure mode of the battery is degraded capacity. Over the years I've had an alarming number of lithium-polymer batteries puff out in consumer devices ranging from my Dell XPS 13 (9343 model, battery was replaced three times) to the Moto Z Play phone (dislocated the screen, replaced twice by Asurion, third time they claimed it was a warranty issue and played support tennis with Verizon) to an iPod Touch (also popped the screen out).
I was able to find a device that actually functions as a USB UPS: https://www.amazon.com/gp/product/B07ZS3WYZY/
It is so nice to be able to unplug my Pi to move it, and have it stay on. I also use them for my usb powered wifi security cameras. So far they have not failed me.
But because of economies of scale, you don’t just pay the difference in BOM cost, you pay that difference plus the difference in fixed costs divided by a much smaller unit run.
USB UPSes exist, and they’re really not that niche. Amazon has one for $50. That’s mass-market pricing as far as electronics are concerned.
As an engineer you are given a power budget, a thermal budget, a size budget, a weight budget and a monetary budget, among many other constraints. This means, like any engineering endeavor, there are tradeoffs to make. That 50-cents you saved on some power controller might be "spent" somewhere else that has a higher impact on the product.
There is a near infinite set of things you can do to make the product better somehow. Unfortunately you don't get to do them all. Many of the things conflict with eachother--more battery life might mean more weight and size that you have to "steal" from some other aspect of the product to balance out. Faster, better charging might cost 50-cents but that might mean in order to stay on budget you'd have to use a lower quality plastic shell that is more prone to damage. That faster, better charging might also eat into your thermal budget, meaning you'll need to spend more on cooling, weight and size.
It's all tradeoffs. There is no free lunch.
Usually it's to make things simpler... but occasionally they will add complexity as long as it makes stuff harder...
Their second favorite is complaining when people make things easier.
It goes like "They'll never know the difference!" and pretty soon you've gone from a premier brand to a cheapo outsourced-to-China generic product.
There's no reason anymore that a power bank should ever even have an off mode unless it's so cheap there's no passthrough, which shouldn't be a thing either because it's annoying and probably saves 50 cents.
It's microamps with a good eco mode switcher.
Inline USB ultracapacitor banks seem like a reasonable product too though.
Hopefully USB will give us standards for power banks someday so you can get certified ones with a defined form factor and behavior.