News for hackers. Stuff that matters.
Re:A looming copper crunch and why recycling can’t fix it by dboreham on Sunday July 31, 2022 @09:28PM (#32300791)
USA could also transition to a proper mains voltage like much of the rest of the planet.
Re:A looming copper crunch and why recycling can’t fix it by neither_color on Sunday July 31, 2022 @10:07PM (#32301100)
Just because the US isn't on the metric system doesn't mean that every single standard we adopt is inherently wrong. Hating on our electricity is one of the silliest things I can think of. In my house the only thing that needs 240V are kitchen appliances, A/C and a car charging outlet, those get circuit breakers that tap both phases. Everything else gets one phase. The way more and more appliances and light fixtures(LED > CFL) are trending towards high efficiency and solar even 120V is more than necessary.
Re:A looming copper crunch and why recycling can’t fix it by maeln on Monday August 01, 2022 @03:52AM (#32303234)
If there is anything to change, it is the horribly dangerous electric socket. I was also shocked to see that many house still doesn't use differential circuit breakers. I guess using 120V reduce the risk of a fatal electric shock, but I still wouldn't trust any installation that doesn't use differential circuit breakers.
Re:A looming copper crunch and why recycling can’t fix it by manfre on Monday August 01, 2022 @06:20AM (#32304014)
Building codes only require upgrading the home's electrical when doing certain types of repairs/renovations. Newer homes will have afci or gfci breakers on most circuits.
Re:A looming copper crunch and why recycling can’t fix it by mortehu on Monday August 01, 2022 @10:10PM (#32314439)
Don't forget kettles and space heaters. Also, visiting vacation homes or cabins where the owner doesn't have an electric car leads to very long charge times.
Re:A looming copper crunch and why recycling can’t fix it by chiph on Sunday July 31, 2022 @09:44PM (#32300904)
230/240v does have it's advantages, primarily being able to use smaller diameter wire for the same current carrying capacity.

But 50 Hz as a system frequency is just wrong. It results in oddities like running your railroad at 16-2/3 Hz.

Re:A looming copper crunch and why recycling can’t fix it by eru on Monday August 01, 2022 @01:26AM (#32302375)
I'm not sure what's so odd about running your railroad at 50/3 Hz? Do you not like rational numbers?

(I guess you are talking about three-phase power in general, or is there anything special about railroads?)

In practice, just like everything in engineering, you don't run your grid at 50 Hz nor your railroad at 50/3 Hz. You run the grid at some frequency that varies slightly around 50Hz. There's always engineering tolerances.

So even if you don't like rational numbers, it doesn't really matter whether you run the railroads at 50/3 +-0.01 Hz, or at 16.66 +-0.01 Hz.

(I don't know how tight the tolerances are in practice here. It doesn't matter for the argument.)

Re:A looming copper crunch and why recycling can’t fix it by iggldiggl on Monday August 01, 2022 @05:23AM (#32303676)
> In practice, just like everything in engineering, you don't run your grid at 50 Hz nor your railroad at 50/3 Hz. You run the grid at some frequency that varies slightly around 50Hz. There's always engineering tolerances.

> So even if you don't like rational numbers, it doesn't really matter whether you run the railroads at 50/3 +-0.01 Hz, or at 16.66 +-0.01 Hz.

In practice the nominal frequency was changed to 16.7 Hz anyway due to some weird edge case created when running motor-generators [1] for prolonged periods of time at exactly the nominal 3:1 frequency conversion ratio. (See https://de.wikipedia.org/wiki/Bahnstrom#16_2%E2%81%843_Hz_ge... and use an online translator at your own peril if necessary.)

[1] These days, newly built (or probably occasionally re-built) substations prefer to use solid-state frequency converters, which are immune to this particular problem, but there still are enough of the older motor-generator sets around, too. Wikipedia also claims that motor-generator sets are more tolerant against earth faults, which might or might not preclude against getting rid of all of them even long-term.

Re:A looming copper crunch and why recycling can’t fix it by lazide on Monday August 01, 2022 @01:38AM (#32302461)
Rational numbers are a lot more work than integers.

Also, 60 is a common base for several things (degrees, time), which interact with the grid in numerous ways.

It’s convenient to have them match.

Re:A looming copper crunch and why recycling can’t fix it by eru on Tuesday August 02, 2022 @10:14PM (#32326851)
Just express everything in micro-Hertz and you can use integers just fine.

(If you need more precision, go for nano-Hertz..)

Re:A looming copper crunch and why recycling can’t fix it by jabl on Monday August 01, 2022 @03:13AM (#32303010)
> It results in oddities like running your railroad at 16-2/3 Hz.

50 Hz railway systems are probably more common than 50/3, at least in Europe:

https://en.wikipedia.org/wiki/Railway_electrification_system...

25 kV AC 50 Hz (60 Hz in countries using such grid frequency) is the modern standard: https://en.wikipedia.org/wiki/25_kV_AC_railway_electrificati...

Re:A looming copper crunch and why recycling can’t fix it by thulle on Monday August 01, 2022 @03:50AM (#32303225)
How does a 50 Hz system frequency result in railroads running at 1000/60 Hz?
Re:A looming copper crunch and why recycling can’t fix it by iggldiggl on Monday August 01, 2022 @07:29AM (#32304507)
For hysterical raisins: Before the advent of power electronics, which allowed three phase asynchronous motors to proliferate, commutated series-wound motors were the railway motor because of their beneficial characteristics (quoting Wikipedia: "high starting torque, can run at high speed, and are lightweight and compact").

A classic commutated series-wound motor is a DC machine. The problem with DC power is that without power electronics, you can't really change the voltage (except downwards by wasteful resistors), so your transmission voltage is limited by your maximum motor voltage and you incur relatively high transmission losses and need frequent substations every few kilometres. (Mainline railways can cheat a bit by equipping all of their rolling stock with two (or occasionally more) motors permanently linked together in series, so each motor only gets a fraction of the voltage, but you can take that approach only so far…)

So you want to switch to AC power, which is more efficient because it can be easily transformed up and then down again, because transformers can actually be made small enough to fit into a locomotive.

Fortunately with some adaptations a series-wound motor can be made to work on AC, too, but there are some trade-offs depending on the required amount of power and the frequency. I.e. the motor still works better if your AC current is more "DC-like", i.e. doesn't have too high a frequency.

It turns out that for something more modest like a hoover or a domestic power drill, an AC series-wound motor ("universal motor") will work fine enough even at 50 or 60 Hz, but for railway purposes with their somewhat higher power demands things didn't work so well.

Because at that time power electronics didn't exist or were still in their infancy (e.g. mercury arc rectifiers), there was no possibility of doing anything useful on board of the locomotive, so instead it was decided to reduce the frequency of the railway's power supply system, because at 16 2/3 or perhaps even 25 Hz motors could still be made to work reasonably enough.

Also at that time changing the frequency meant using a motor-generator set, and presumably choosing some simple integer ratio for the two frequencies also simplified things.

By the time other countries started considering switching to AC electrification, usable rectifiers existed that could be used on locomotives, so those countries could electrify at the full 50 or 60 Hz and then rectify the current to DC on board of the locomotive, thereby sidestepping the problems of running a commutated series-wound motor with AC power.

Even later on we then got fully variable voltage and frequency inverters, which finally allowed serious usage of (usually asynchronous) three-phase induction motors.

(Some railways used three-phase drives even before that, but without modern electronics this was a somewhat more cumbersome prospect, see e.g. https://en.wikipedia.org/wiki/K%C3%A1lm%C3%A1n_Kand%C3%B3)

Re:A looming copper crunch and why recycling can’t fix it by ChoGGi on Monday August 01, 2022 @08:37AM (#32305100)
I know it's a spell check thing, but I love "hysterical raisins".
Re:A looming copper crunch and why recycling can’t fix it by xvedejas on Sunday July 31, 2022 @09:58PM (#32301017)
Split phase means we get the choice of 120V (for safety) and 240V when we really need it (eg appliances)
Re:A looming copper crunch and why recycling can’t fix it by jabl on Monday August 01, 2022 @12:39AM (#32302137)
Where I live it's fairly common for houses to have 230V single phase for most things, and then 400V three phase for things needing more power.
Re:A looming copper crunch and why recycling can’t fix it by ReptileMan on Monday August 01, 2022 @02:59AM (#32302920)
I am not sure that Western Europe is objectively worse at the safety department than us. Also you can always put a smaller breaker on 240.

The 120V in the US is a 640kb ram should be enough situation. You were first, thought you build the spare capacity, were surprised by the explosive growth and how useful electricity really is.

With modern homes moving to 100% electricity even 240 is not enough. In my flat I have pizza oven (3kw),inducation burner x 2 (3kw each), normal oven, 12000 btu AC x 2, tumble dryer, some other appliances that chug sub 1k... throw in some car charging, electrical water heater... A modern home is using orders of magnitude more electricity. And it is going up.

Re:A looming copper crunch and why recycling can’t fix it by manfre on Monday August 01, 2022 @06:12AM (#32303961)
You seem to be confusing voltage as the unit that dictates electrical load. Voltage x Amps is what dictates how many electrical devices you can use at the same time. Residential voltage is fixed at 120 or 240 with no chance of changing in our lifetimes.

As homes need more power, they are delivered more amps. The common for newer construction in the US is 240V at 200 amp or 400 amp for larger homes. Older homes will have anywhere from 80-150A depending on when they were built or remodeled enough to require replacing the main service panel.

Stove, HVAC, and dryer require their own dedicated 240V circuits.

Re:A looming copper crunch and why recycling can’t fix it by ReptileMan on Monday August 01, 2022 @08:04AM (#32304802)
I have not confused anything. The idea is that powerful applliences require more copper and bigger gauges for lower voltages (not linear). And we have more if them. So by upping the voltage we can save on the wiring.

In eu you don't have to think where to plug 2.5 kw space heater. Any outlet is good enough. In the US you have to. And with home appliances actually becoming bigger and more powerful I think that even the EU baseline will become too constraining eventually. Since usually there are limitation on the gauges that are ran from the main breaker to the sub-breakers (don't know english electric jargon)

Where I live I have a wire that can hold I think 40 amps in the wall from the main breaker to the board where the small breakers terminate the different home circuts. If I want to upgrade it is dig baby dig. 6 floors.

Re:A looming copper crunch and why recycling can’t fix it by sokoloff on Monday August 01, 2022 @05:56AM (#32303862)
Orders of magnitude more?

2 base 2 orders of magnitude perhaps, but not 100x more…

Re:A looming copper crunch and why recycling can’t fix it by petre on Monday August 01, 2022 @12:50AM (#32302194)
How do you resolve phase imbalances? Most generators are 3 phase. The system is othrewise well designed to use one or two phases when needed. We use one or three phass in Europe.
Re:A looming copper crunch and why recycling can’t fix it by eru on Monday August 01, 2022 @01:27AM (#32302381)
Different circuits in a single American household use different phases, I think.
Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Monday August 01, 2022 @01:43AM (#32302487)
Correct. Fun times trying to figure out why your power-line networking doesn't work.

The heavy load stuff is 240V anyway.

Re:A looming copper crunch and why recycling can’t fix it by petre on Monday August 01, 2022 @04:09AM (#32303322)
So it's the same way we do it in Europe with single phase, but I think it's easier to split three phases between single phase loads (most AC loads in a hosehold), rather than three phases between two phase loads (a few AC loads in a household). I still like the 120V plug connector with a key on the hot wire. In Europe I always wire the hot on the right hand side of the Schuko socket, as most standards have it on the right.
Re:A looming copper crunch and why recycling can’t fix it by eru on Monday August 01, 2022 @05:44AM (#32303807)
American outlets and plugs are barely usable. They go live even when you don't completely plug them in, yet.

The British plug is a pretty decent design from an electrical safety point of view. (However, they turn into caltrops in the dark.)

Re:A looming copper crunch and why recycling can’t fix it by petre on Monday August 01, 2022 @06:36AM (#32304126)
> The British plug is a pretty decent design from an electrical safety point of view

It's needlessly huge. I like type J (SN 441011, Swiss plug) and type N (IEC 60906-1, South Africa).

Re:A looming copper crunch and why recycling can’t fix it by eru on Monday August 01, 2022 @06:52AM (#32304235)
Yes, both of those would also work.

It's just that the American plugs are really the worst. See also https://www.youtube.com/watch?v=K_q-xnYRugQ for other badness.

Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Monday August 01, 2022 @01:48AM (#32302507)
Unless you're in a condo/apartment building where it's often 208V, not 240V. Kinda annoying when your "208V/240V" dryer puts out 25% less heat.
Re:A looming copper crunch and why recycling can’t fix it by jsjohnst on Monday August 01, 2022 @08:10AM (#32304858)
> Unless you're in a condo/apartment building where it's often 208V, not 240V.

208V (vs 220/230/240V) has minimal to do with it being a condo and everything to do with the type of incoming power. 208V is from taking two phases of a 120V three phase service. One phase to ground, 120V, phase to phase, 208V. For the alternative voltage (named 220/230/240V depending on context), the incoming power to the transfer is a single phase. The transformer then produces a split phase 220/230/240V where each phase is 180° opposite each other. The only reason you _might_ see it more frequently at a condo/apartment is due to there being a need or desire for 3 phase power.

Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Monday August 01, 2022 @02:27PM (#32310217)
At least around here, condos/apartments will have big elevator, water pump and HVAC motors and therefore prefer 3ph, so 208V is the "rule" rather than the exception.

Where it gets a little funny is that the Canadian standard for "industrial" power is 600V, not 480V, and that can make it hard to find replacements in some larger buildings with custom requirements.

Re:A looming copper crunch and why recycling can’t fix it by jsjohnst on Monday August 01, 2022 @10:31PM (#32314540)
> At least around here, condos/apartments will … so 208V is the "rule" rather than the exception

Yeah, didn’t mean to imply it was unusual, just explaining for others that it’s not a quirk of condos/apartments specifically.

> Where it gets a little funny is that the Canadian standard for "industrial" power is 600V, not 480V

Speaking of 480V, you ever dealt with 277V much? That’s a real “fun” voltage to be around when something goes wrong. :(

Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Tuesday August 02, 2022 @10:17AM (#32318755)
Probably the least common voltage in Canada. We’ll have some 347V though.

My condo parking spot has a wonderful looking junction box above it labelled “600V”.

But I’ve heard some Canadian factories will still get spec’d with “US Voltage” (ie: 277 and 480) for “standardization”, but probably so they can move the plant to the US without having to find electricians that can speak Canadian.

Re:A looming copper crunch and why recycling can’t fix it by jsjohnst on Tuesday August 02, 2022 @08:05PM (#32325974)
> Probably the least common voltage in Canada. We’ll have some 347V though.

Yeah, if you don’t have 480V, extremely unlikely you’ll have 277V. 347V has comparable issues to what I was referring to with 277. 480/600 aren’t voltage you’ll normally find wire nut’s in a jbox or behind say a light switch for example, but 277/347 you will. Unlike 120V though, if something were to cause it to arc (or worse, electrocute you), you’re going to have a very bad day! Not tagging off a circuit is always a bad idea, but especially when voltages are 250+.

Re:A looming copper crunch and why recycling can’t fix it by coreyp_1 on Sunday July 31, 2022 @11:22PM (#32301628)
There's a lot of misconceptions about US electricity. This video does a nice job at pointing out the good and the bad.

https://www.youtube.com/watch?v=jMmUoZh3Hq4&ab_channel=Techn...

Re:A looming copper crunch and why recycling can’t fix it by xyzzyz on Sunday July 31, 2022 @10:01PM (#32301048)
Aluminum wiring woes is as much of a problem in parts of Europe I am from as it is in the States.
Re:A looming copper crunch and why recycling can’t fix it by yjftsjthsd-h on Sunday July 31, 2022 @11:24PM (#32301648)
What would be better and how would it fix this issue?
Re:A looming copper crunch and why recycling can’t fix it by a9h74j on Monday August 01, 2022 @01:04AM (#32302258)
So after the next revolution it will all be 100V or 1000V (and a week will be 10 days)?
Re:A looming copper crunch and why recycling can’t fix it by eru on Monday August 01, 2022 @01:34AM (#32302426)
Of course, not. That would be silly. The Volt is an arbitrary unit. After the revolution, we'd be using natural units. https://en.wikipedia.org/wiki/Natural_units

Basically, you'd express things in terms of speed of light, electron charge, planck length etc.

In this case, [Planck energy / electron charge] might be an appropriate unit.

(It would also be a pretty useless unit, because it's absurdly large compared to everyday voltages.)

See also https://en.wikipedia.org/wiki/Planck_units

Re:A looming copper crunch and why recycling can’t fix it by a9h74j on Monday August 01, 2022 @01:58AM (#32302577)
Pretty sure that David Graber demonstrated that there have been societies which used Natural units.
Re:A looming copper crunch and why recycling can’t fix it by imtringued on Monday August 01, 2022 @02:25AM (#32302735)
Ancient Egypt apparently used something very similar to the meter.
Re:A looming copper crunch and why recycling can’t fix it by strbean on Monday August 01, 2022 @01:16AM (#32302316)
128V ftw.
Re:A looming copper crunch and why recycling can’t fix it by a9h74j on Monday August 01, 2022 @01:55AM (#32302557)
And for an upper limit: 18000V / 137 = 131.4V