News for hackers. Stuff that matters.
Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Monday August 01, 2022 @02:27PM (#32310217)
At least around here, condos/apartments will have big elevator, water pump and HVAC motors and therefore prefer 3ph, so 208V is the "rule" rather than the exception.

Where it gets a little funny is that the Canadian standard for "industrial" power is 600V, not 480V, and that can make it hard to find replacements in some larger buildings with custom requirements.

Re:A looming copper crunch and why recycling can’t fix it by jsjohnst on Monday August 01, 2022 @10:31PM (#32314540)
> At least around here, condos/apartments will … so 208V is the "rule" rather than the exception

Yeah, didn’t mean to imply it was unusual, just explaining for others that it’s not a quirk of condos/apartments specifically.

> Where it gets a little funny is that the Canadian standard for "industrial" power is 600V, not 480V

Speaking of 480V, you ever dealt with 277V much? That’s a real “fun” voltage to be around when something goes wrong. :(

Re:A looming copper crunch and why recycling can’t fix it by Scoundreller on Tuesday August 02, 2022 @10:17AM (#32318755)
Probably the least common voltage in Canada. We’ll have some 347V though.

My condo parking spot has a wonderful looking junction box above it labelled “600V”.

But I’ve heard some Canadian factories will still get spec’d with “US Voltage” (ie: 277 and 480) for “standardization”, but probably so they can move the plant to the US without having to find electricians that can speak Canadian.

Re:A looming copper crunch and why recycling can’t fix it by jsjohnst on Tuesday August 02, 2022 @08:05PM (#32325974)
> Probably the least common voltage in Canada. We’ll have some 347V though.

Yeah, if you don’t have 480V, extremely unlikely you’ll have 277V. 347V has comparable issues to what I was referring to with 277. 480/600 aren’t voltage you’ll normally find wire nut’s in a jbox or behind say a light switch for example, but 277/347 you will. Unlike 120V though, if something were to cause it to arc (or worse, electrocute you), you’re going to have a very bad day! Not tagging off a circuit is always a bad idea, but especially when voltages are 250+.