So could a Roman or Greek. He'd just need a counting board and some stones. He could probably do it faster than you, as well. Anyone using an abacus today could perform almost exactly the same algorithms, with the added convenience of having beads on rods in a frame instead of an unwieldy counting board and stones. The algorithms are the same, and you can also do division and square roots with a counting board or abacus. When done deftly moving stones around on the counting board (and Aristotle makes clear that this goes so quickly that it's possible for the person calculating to cheat an onlooker, like in a con-man's shell game), one might choose to write the result down on a tablet, and he might just finish writing before you do.
Indeed, the biggest advantage of paper arithmetic is that it leaves a written record: each step in the algorithm can be checked for mistakes afterward. It is otherwise significantly slower and not inherently more accurate than a counting board.
The other advantage that paper arithmetic has is that it can be easily reproduced in printed books, making learning more advanced techniques more accessible / easier to spread to anyone literate, without requiring an expert teacher.
(And finally, paper arithmetic [eventually] has the advantage that it can be more conveniently extended and generalized to include more kinds of operations and structures, in a way that is easier to explain and teach than adding new kinds of counting board rules. Paper arithmetic is a more natural precursor for symbolic algebra than counting-board calculation.)
The big disadvantage of paper arithmetic is that it depends on widespread literacy and cheap access to paper (or similar material). In a context where paper is expensive or unavailable, written arithmetic is not very compelling.
Greek and Roman students typically used wax-coated boards and scratched them with styli. The surface could be heated or rubbed to restore its unmarked form.
My point was that there were cheap alternatives to parchment and paper for quick work.
The thing that really spread Hindu numbers around the world was access to paper.
My impression is that in India “Hindu” numerals and arithmetic were developed using some kind of erasable board, but among Arabic speakers (and later Europeans) the spread of Hindu numerals went along with paper as a prerequisite technology.
This looks relevant https://cpb-us-e1.wpmucdn.com/sites.ucsc.edu/dist/f/704/file...
Here is a relevant looking book: https://yalebooks.yale.edu/book/9780300089554/paper-print
In e.g. Britain, the transition to Hindu numerals did not occur until 1600–1800, depending on the place.
It's hard to have double-entry bookkeeping without books.
I'm unsure if he used Arabic or Roman notation... Though the dedication page of Summa Mathematica in fact does include recognisable Hindu / Arabic numerals:
https://en.wikipedia.org/wiki/Summa_de_arithmetica#/media/Fi...
Wikipedia's article has several illustrations, but none of the actual bookkeeping notation itself, which is ... a curious oversight. Continued on the double-entry bookkeeping article as well FWIW.
Many people don't realize how fast it is to work on abacus (or soroban in Japanese). Here is an example of what a 7 year old can do
https://www.youtube.com/watch?v=GQtqlB-jXO0
For many years I always did my taxes and other accounting using an abacus because it was sooo much easier than longhand (this was before calculators).
There is the famous Feynman story as well:
https://www.ee.ryerson.ca/~elf/abacus/feynman.html
But you wouldn't impress an ancient Greek very much by taking cube roots quickly because there wouldn't be much call for that.
But there are certainly plenty of mathematical ideas and tools ancient people didn’t know about: they didn’t have a convenient method of manipulating algebraic expressions and equations; they had only the most rudimentary version of differential/integral calculus; they didn’t have group theory, linear algebra, complex analysis, etc.
The less optimistic version would be this https://grapevine.is/mag/articles/2014/10/08/the-american-so...
on edit: removed a not that should not have been there
[1] Cf. this sample from his bible: https://upload.wikimedia.org/wikipedia/commons/5/56/Gutenber...
The printing press seems to be far more complex than just "carve some wood". Otherwise I find it hard to believe that it took until 1400AD for people to figure out how to make large stamps.
https://en.wikipedia.org/wiki/Printing_press#Gutenberg's_pre...
The prerequisite for economic printing is paper, and the tech tree for paper is reproducible from Roman conditions. The production of vellum is measured in years, scribes were barely the limiting factor on text production.
A lot of existing inks at the time where suitable for writing not pressing.
My understanding is that while parchment (vellum in particular) was used in early printing press printings, such as the Gutenberg Bible, the use of paper was more common because it was so much cheaper, if less durable.
People need to solve all of those, and have some reason for solving each one independent of the others, before the written word can even start to proliferate widely.
Sure you could. The antikythera mechanism shows more than enough skill and precision to make a small one. It might only be a toy for the rich though. I'm not sure if you could afford enough metal to make one large enough to do useful work, and even if you could the fuel required might kill it (coal wasn't really available at the time, though knowing it is useful might be enough to find and use it). The metals of the time where not up to a modern high pressure (and thus efficient) steam engine, but a large low pressure steam engine is perfectly possible.
That said, water or wind power would be a much better invention to focus your efforts on. I'm not sure how much of that they had though.
In order to get this, there are a lot of steps involved, including the ability to sand cast and bore iron of sufficient quality to take a reasonable amount of pressure.
If you got to that point, you might want to build a Stirling engine instead, it's far less likely to explode and kill people.
Lack of precision means worse efficiency, crude steam engines with careful handfitting can work well enough. Though this adds times, and as the other replies note it isn't clear if the Greeks had the fuel to run a modern steam engine if you gave them one with a boiler.
There was no danger of a Watt engine exploding.
I learned something new today, thanks for pointing that out.
Irrespective of whether it was possible for the Greeks to make them, what would be the economic incentive for them to build large low pressure steam engines at scale? In our timeline, the only serious application of large low pressure steam engines was pumping water out of mines, from after 1720 or so. Even with the incentive of the industrial revolution, it took almost a century to get small high-powered engines, with the first public steam train in 1825.
Are these actually feasible with a large low-pressure steam engine of the sort that the Greeks could have actually constructed? Remember that the early real steam engines were only just powerful enough to slowly lift buckets of water.
[Edit] - good answers below - thanks! But I think the question of economic viability still stands. As pointed out elsewhere, a waterwheel is easy to construct and doesn't have ongoing fuel costs. A steam engine requires a reasonably well developed iron/steel working industry (including skilled artisans), which in turn requires a fair amount of iron ore and fuel to support smelting. The finished steam engine would require a lot of wood as fuel, or coal, which wasn't widely available in ancient Greece, or easily transportable without a lot of effort. Ancient Greek metallurgy was definitely not sophisticated enough to build a steam train and as for for building a railway 1) they could barely build graded roads and 2) they would have needed a phenomenal amount of mass-produced steel for the tracks.
You can do the same thing with fireplace and water and it's certainly doable with ancient technology, but I'm not sure it's worth it when you have more running water than industry needs anyway.
Another thing they could do is Heron's steam turbine geared in such a way that it does useful work. Also not sure if it's worth it.
This trick (using low power to lift the hammer slowly and dropping it quickly) can be adapted to use any inefficient power source - hamster powered mills are possible ;)
Water wheels have no fuel costs, and very little ongoing maintenance costs. A steam engine that could be built in antiquity would be incredibly expensive in both respects. So even if the technology existed, there would be little economic incentive to use it over a water wheels, since transportation is cheaper than fuel and maintenance.
As recently as 1900, steam engines were so expensive that most farmers rented equipment by the day.
Some generals would likely find a mobile mill stone quite useful. When your centuria loot a conquered land they can now take raw grains in addition to processed flour without being tied down to the local stationary mills.
Not in the slightest. The legion on the march has no use for a millstone because nobody's eating bread. They would never carry processed flour, because it spoils quickly. They carried raw grain and made porridge from it.
I thought they primarily consumed bread (both hardtack and leavened), watered down wine/vinegar, and meat (when available.)
https://imperiumromanum.pl/en/roman-army/food-in-roman-army/
https://www.comitatus.net/research_files/rations.pdf
Those both seem like decent writeups which cite to several classical sources. The first one mentions porridge (stating that bread was preferred); the second explicitly makes the assumption that all grain becomes bread. We can safely ignore that assumption.
More from that first writeup:
> The daily grain ration (wheat or barley)for one legionary was on average 830 grams and was in the form of unground grain; This was mainly due to the fact that grain spoiled slower than flour.
> The meals of the Roman legionaries were mainly based on wheat, from which two types of food were made:
> mash, called pulse. It was an easier-to-make food that required a mixture of cooked wheat grains, water, salt, fat, and olive oil or milk. Sometimes vegetables or spices were added.
> flatbread (pane). It was the more popular use of grain. The soldiers threshed out the grain, ground it with a device or stone, mixed it with water, salt and spices, and then roasted it over the fire.
So, what's true:
- The legion isn't going to carry a millstone. They're huge and there's no way to justify it.
- The legion isn't going to make itself dependent on the location of local mills. That would defeat the purpose of being a military force.
- The legion isn't going to carry flour, because it spoils. They carry raw grain.
- But they also carry hardtack, which is prepared so as not to spoil quickly.
- A foraging legion already takes raw grain. That's their primary foraging objective. They are not limited to robbing granaries; they're happy to harvest it directly from the field.
- Food preparation is done at a very low level - if the grain is going to be ground, it will be done in parallel by a large number of soldiers personally grinding small amounts of grain each, not by a mill.
- The soldiers often do eat bread. But if you're going to eat bread, you make it from raw grain the same day. This has to occur wherever you happen to be, so you'll be using something like a mortar and pestle.
- Despite the fact that bread is preferred to porridge, sometimes you make porridge anyway. It's much easier to make.
> it will be done in parallel by a large number of soldiers personally grinding small amounts of grain each, not by a mill
I'd had it in my head for some reason that a mill stone was the only reasonable way to turn grain into flour. This was the main factor I wasn't considering. The weight/effort to handle a portable mill certainly wouldn't beat hand tools. Even if to just help keep soldiers busy.
EDIT: I expect that if one were to analyze an army's flour requirement as some form of equipment weight + work-hours / grain-throughput * army size there would be a point at which it made sense to haul a portable mill. But it definitely would not make sense to power it with steam engine compared to having soldiers turn it by hand. I would also expect that a force large enough to utilize that efficiency would be unheard of in roman times.
Of course practical over land transportation is a massive change, and a large part of why our civilization can advance so far. (without tractors 90% of us wouldn't be born because our grandparents would have starved, and the rest would be tillers of the ground - as in physically running a shovel)
... makes the brigade/regiment/whatever far less mobile for no real benefit.
The Greeks had steam engines.
https://en.wikipedia.org/wiki/Aeolipile
It's just that slaves were vastly cheaper. In Britain early steam engines were price competitive with horses only at the coal mine for the first century of their operation.
The first engines were atmospheric pressure, e.g. they used a vacuum to work. They were not closed cycle and they did not care about wasting water seeing as their purpose was to be a water pump. They didn't care about wasting coal as they worked at a coal mine. For the first century of their development they were stuck in the one niche where both the things they required were free.
https://etc.usf.edu/clipart/77500/77524/77524_newcm_stmeng.h...
An illustration that shows how they removed waste water from the piston. It was a century before high pressure engines were used, which were also open cycle and why steam trains released great plumes of steam when they moved.
The Aeolipile is exceedingly easy to reduce the steam outflow by having smaller nozzles. Given that they are basically a solid sphere made with four pipes sticking out they would have been the easiest form of high pressure engine to keep from exploding if there was a demand for mechanical work. They would however still explode, unlike the atmospheric engines.
Edit: It turns out they could produce their own for trig functions and wouldn't have been all that impressed by the log table because they didn't have logs.
In general (I'm sure someone's dug incredibly deep on this topic and can tell me exactly why I'm wrong), the pre-digital/electronic-computer era of engineering seems to have been really focused on doing log based calculations, which makes sense -- a good design has tolerances such that you only have to be right in the order of magnitude, right? This seems like it would much more appropriate to share with ancient civilizations. No need to waste precision when the implementation is going to be done with an hammer and chisel.
I will only be useful if you can convince ancient Greek computers to go out to E-15, haha.
I'd suck at "inventing" anything impressive & practical -- so it'd be hard to get heard about germs, etc., etc., which I do know.
I thought it would be a silly story about a guy who get sent to the past but it is incredibly dark and pessimistic. The Yankee’s knowledge wows everyone, he’s put in charge of a war machine and creates an industrialized hell hole.
The first book from the 17th century series, 1632, is downloadable for free from Baen books.
It was supoposed to have been opted for a movie... and then douchebagery ensues and it never made it to light...
Will find a friend when I'm finished, as well.
And there's always sand! It's probably apocryphal but the legend is that Archimedes was slain by a Roman soldier during the taking of Syracuse when he objected -- "Don't disturb my circles!" -- to how the soldier marched through his trigonometry problems.
For those who find the general idea enticing, there was a book written about 80 years ago on this idea. What if a time traveller got sent back to Ancient Rome? https://en.wikipedia.org/wiki/Lest_Darkness_Fall
A couple friends and I are big fans of the book, and premise. We always figured it was far too optimistic. Most likely you'd die of dysentery or be sold off into slavery. But assuming not, I figure the real path to power wouldn't be brandy, but strong acids and electroplating.