10GBASE-T exists, but it turns out pushing 10gbit/s over 100m of twisted pair requires chips that are hot and power hungry. Again, not great for desktops or laptops. And because it’s not used in data centres, there are no economies of scale or trickle down effects.
Gigabit Ethernet and wifi being “good enough” combined with 10gig over twisted pair being expensive and power hungry means that the consumer space has been stuck for a long time.
It's easy enough to get G.657.B3/G.657.A3 cables, and you can wrap them repeatedly around a pencil and they are fine.
Also, most consumers would not notice the bend attenuation anymore becuase they aren't trying to get 10km out of them :)
I suppose forwards compatibility is good, but unfortunatel unlike 2.5Gbps, 5Gbps is practically unusable on existing CAT5e cables.
Maybe this used to be the case long ago, but I don’t think it’s true today. Personally I’m pretty rough with fiber (having slammed cabinet doors on fiber, looped fiber around posts with a low bend radius, left the ends exposed to dust, etc) and had no issues within a data center. Can’t say the same for copper. Even the cheapest 10km optics have more margin when your link is only 50m.
Oh and bend insensitive fiber is dirt cheap and works just fine when it’s tied into knots.
i buy armored multimode patch cables for, i dunno, 10 or 20% more per unit length, and they seem indestructible in my residential short-distance use cases.
> Gigabit Ethernet and wifi being “good enough”
i think this explains it all. when the average user prefers wireless to wired gigabit, we know how much bandwidth they actually need, and it isn't >=gigabit.
i don't know what you're using, but the LC/LC connectors i use seem pretty durable, and the springy bit that wears out can be replaced. the SFP+ modules are all metal; i am unwilling to believe they can wear out.
> and cables left disconnected with out the risk of an accidental laser eye surgery
single mode, which isn't human-visible, is of concern but the multimode (which i mentioned using) isn't any worse than a cheap laser pointer. it isn't strong, and you can see it.
Maybe a laser in your eye is an acceptable risk in your home but I doubt it is an acceptable hazard in a work place.
That is finally improving. The technology improvement meant we get less than 5W per port on 10Gbps. Cost will need to come down though.
> (gamers and video professionals being an exception)
I play Stadia, 4K HDR 60FPS, just fine on a gigabit ethernet connection and 150MBit internet connection. Any games not streaming the entire video are fine with just kilobits/s of data, as long as the latency is good.
So the case for home 10GE is even weaker ;)
[1] https://www.machinadynamica.com/machina31.htm
[2] https://www.synergisticresearch.com/cables/srx-cables/srx-sc...
[3] https://www.synergisticresearch.com/cables/srx-cables/srx-ac...
[4] https://en.wikipedia.org/wiki/The_Emperor%27s_New_Clothes
Why not compare the insane prices of thermal paste and compounds per volume/weight with the stuff that is used industrially?
Not always, but often used for results which could be called statistic noise. Very diminishing returns.
All for pushing reviews with many bar graphs over two dozen pages, and so much more page impressions. Like the rest of gamermedia, too.
Woo!
So we have the very few audiophiles which totally ignore the thin copper layer on cheap PCBs, versus the whole market segment of twitchy gamers going for Bling, Bling, Bling without function on their RAM, coolers, vs. the equivalent stuff installed in laptops and servers which lacks that :-)
Which is what rules out wifi :)
1. Consumer broadband speeds rarely exceed 1Gbps
2. 1Gbps Local network transfers are seldom slowed by the network (as large file work typically involves HDD still)
3. Where local network transfers are impeded by the network speed the transferring itself isn't a frequent enough and blocking thing that people feel they need to fix it... they just go make a cup of tea once or twice a day
4. There are a lot of old network devices and cables out there, some built into the fabric of buildings (wall network sockets and cable runs)
5. WiFi is very very convenient, so much so that 250Mbps is good enough for almost anything and most people would rather be wireless at that speed than wired at a much higher speed (gamers and video professionals being an exception)
And ultimately, the cost and effort of investing in it doesn't produce an overwhelming benefit to people.
Even in quite large offices, it's hard to argue that this is worth it when the vast majority of people are just using web applications and very lossy audio and video meetings across the internet.