It's easy enough to get G.657.B3/G.657.A3 cables, and you can wrap them repeatedly around a pencil and they are fine.
Also, most consumers would not notice the bend attenuation anymore becuase they aren't trying to get 10km out of them :)
I suppose forwards compatibility is good, but unfortunatel unlike 2.5Gbps, 5Gbps is practically unusable on existing CAT5e cables.
Maybe this used to be the case long ago, but I don’t think it’s true today. Personally I’m pretty rough with fiber (having slammed cabinet doors on fiber, looped fiber around posts with a low bend radius, left the ends exposed to dust, etc) and had no issues within a data center. Can’t say the same for copper. Even the cheapest 10km optics have more margin when your link is only 50m.
Oh and bend insensitive fiber is dirt cheap and works just fine when it’s tied into knots.
i buy armored multimode patch cables for, i dunno, 10 or 20% more per unit length, and they seem indestructible in my residential short-distance use cases.
> Gigabit Ethernet and wifi being “good enough”
i think this explains it all. when the average user prefers wireless to wired gigabit, we know how much bandwidth they actually need, and it isn't >=gigabit.
i don't know what you're using, but the LC/LC connectors i use seem pretty durable, and the springy bit that wears out can be replaced. the SFP+ modules are all metal; i am unwilling to believe they can wear out.
> and cables left disconnected with out the risk of an accidental laser eye surgery
single mode, which isn't human-visible, is of concern but the multimode (which i mentioned using) isn't any worse than a cheap laser pointer. it isn't strong, and you can see it.
Maybe a laser in your eye is an acceptable risk in your home but I doubt it is an acceptable hazard in a work place.
10GBASE-T exists, but it turns out pushing 10gbit/s over 100m of twisted pair requires chips that are hot and power hungry. Again, not great for desktops or laptops. And because it’s not used in data centres, there are no economies of scale or trickle down effects.
Gigabit Ethernet and wifi being “good enough” combined with 10gig over twisted pair being expensive and power hungry means that the consumer space has been stuck for a long time.