Insulation, too. A lot of sheds and cabins (and single-family homes) could do with more. Saves on cooling bills in the summer, too.
Anyway, in a cold climates like mine an acre would not be enough to keep you warm because trees grow slow when it's winter six months out of twelve. It takes a lot of wood to keep you warm, and one tree gives surprisingly little wood. After a handful of years you'll have clearcut your measly acre and still have another couple of decades to go before it becomes harvestable again. I'd say you want at least 10 acres if you manage it well and the soil and drainage are at least half decent.
They grow faster since they already have a root structure, the size is consistent and the wood is generally straigter (the japanese have a similar technique for extremely straight cedar logs)
Single purpose but not reliably there heat capture methods add cost and maintenance.
It’s often more cost effective to have a general purpose method that while not as efficient in one case is generally more overall (cost) efficient.
Sure, a backup plan is a good idea. But it doesn't have to be very good or very efficient, as it will be rarely used.
There are weeks with zero direct sun, just low cloud cover, scattered snow, and cold cold cold.
I was in Michigan once when Lake Superior froze over, shore to shore.
Unless the place is so well insulated you can keep it warm purely with body heat, you need supplemental heating in climates like this. The sun is not always shining.
Some folks in less severe climates (like New Hampshire) seemed to get by with baking and other managed appliance heat. That does require you spend time doing, and orient your activities around, things to produce heat to stay warm. Some will find that palatable, others won’t.
Posters in Colder climates (like Ontario) noted propane, or thermal mass heaters (such as the rocket heater in the thread).
‘Then the propane could make up the modest difference on long cold cloudy stretches.’
Thanks for linking it!
The amount of heat needing to be generated can then be calculated based on the average temp over a longer period of time, and those batteries I don't imagine have to be "warm" exactly.
Any charging around or below freezing causes pretty quick destruction of the cells as the chemistry switches to a more favorable destructive one way electroplating process instead of the desirable (and reversible) ion exchange process.
A common engineering solution to this has started to be temperature dependent shunts that route charging energy to heating pads around the battery until the battery temp gets above a certain safe point.
It adds complexity, cost, and adds several undesirable failure mode however, and Lithium battery cost is already a major factor in these systems, so if you’re in a situation where you can’t reliably temperature control your batteries (cold climate, non-conditioned battery space), lead acid is still a very viable and often desirable chemistry instead.
Round trip efficiency isn’t great with them, and you have to way over provision to get good cell lifespan, but it works.
Unless you live in the desert, having the batteries too hot isn't as big of an issue as freezing them.
It's good practice to snake a water pipe around every lithium cell anyway in big packs, because otherwise one bad cell can self-heat to the point of catching fire, even while other nearby cells are cold. The flowing water means the bad cell can't get to the point of fire.
New ones do have a significant gain at that temperature. For instance this Samsung Nordic Home: https://www.elkjop.no/product/hjem-og-husholdning/oppvarming...
Solar panels produce the most power on cold winter days. The 'rated power' is for 20 degrees ambient at full (90 degrees, no cloud) incidence at sea level.
What you could say is that solar panels in the winter do not produce the same amount of power in an average day as they do in the summer due to the shorter day and the bigger chance of occlusion as well as the longer path the suns rays have to travel through the atmosphere.
I had 48KWh worth of storage, 2500 W worth of wind and another 5000 W worth of solar. This was in Northern Ontario. Until we added the windmill we fairly regularly needed the generator, after we added the windmill the generator just sat there gathering dust.
This was a major factor in designing the machine the way I did, variable pitch is a lot more work but a machine like that will start up far earlier than a fixed pitch machine. It also had its effect on that stator, which I made with the laminates at a slant over 1/3rd magnet width, which reduced cogging to nearly nothing. This is a huge factor in starting up a direct drive machine.
If it's portable, your option works well.
For year round off grid use, there's something to be said for sealed lead acid, or flooded lead acid - they don't care about being cycled while cold (capacity is down and the voltage sags a good bit), and as long as they don't get too deeply discharged, they don't freeze.
A single panel, facing south, absolutely vertical, will shed snow and if you have no other loads, is usually enough to offset controller loads and self discharge over time to keep the batteries fully charged (and therefore not freezing) over winter.
There's no way you'll generate enough heat on electricity to keep a battery bank (or cabin) warm in the winter most places. I've got 5kW of panel on my office, and still can't manage that for a small, well insulated shed.