I think it's fairer to say your build is 40%-ish bamboo composite. When we're calling it bamboo we're doing that industry's greenwashing marketing for them.
Cool guitar!
5% glue is far from something like carbon composite, where most content is epoxy. Common wood surface treatment is probably more than 5%, yet we don't call it a wood composite.
IMO, total surface sealant makes more of a material difference than 5% glue on the inside.
The problem with saying it's 38% bamboo is it implies it's in some meaningful sense made out of bamboo. It's not. There isn't a way to go in there and cut out a piece and have it be bamboo--unless it's really, really small (maybe). Whereas it's totally possible to take a piece of wood from an old piece of furniture, surface it four sides, and have essentially wood (albeit a little smaller).
I think also that you're a little off on two things: 1, common wood surface treatments are < 5%, and 2, composites vary but 60/40 fiber/resin by mass is a reasonable place to start.
[1] https://www.youtube.com/channel/UCDQz4H7tz6Fwu5_5rg4W6pA
Lots of the Ikea "wood" furniture is made this way, some apparently from relatively small scraps.
I noticed you use the Planet Waves tuners. I love those as well, they're much more practical as they cut the strings for you. I wonder why they don't make them in more traditional colors, or why other manufacturers don't provide similar solutions. Everyone else makes just regular and locking tuners, not the locking-and-cutting tuners.
For a performing amateur musician, the ability to change your string quicker and without having to carry extra tools is certainly beneficial, and people spend a lot of time fretting about much less important details in their guitars.
I do like the current trend in youtube guitar videos talking more about playability, usability and reliability, and doing things like switching jacks or nuts, instead of endless pickup sound comparisons.
https://www.amazon.ca/Kluson-SD9105MN-Vintage-Tuning-Machine...
In the end I went with some 150x4cm oak strips of varying width from the left-overs bin of a wood vendor. 5€ the piece was a pretty good deal back then.
I really wanna build one almost completely from bamboo (with various veneers to get some accents/lines in) but it's really hard to source boards now. Meh... but yeah, who would have thought that "tonegrass" would become a term someday haha.
I saw the picture above, looks very good!
> tone grass
I honestly believe that the key to building a good guitar is stiffness ... This will create a very high pitched instrument, as it does not lose the high frequencies in the wood. But that can be sorted out later vis EQing
Compared the properties to the wood I wanted to use for parts of it (mainly the core/neck and fretboard) and decided to go for it.
So the second build [1] is 40ish % bamboo with purpleheart veneers in between layers of bamboo and purpleheart/olive for the body. Next build will be around 80% bamboo. Trying to source some strand woven bamboo boards to try them out as fretboards as well, but for a part time builder like me, getting such small quantities of bamboo boards is rather hard.
But yeah, fascinating material even outside of construction use. The boards I used for the guitar builds were nice to work with, easy to sand and finish (using wipe on poly).
[1] https://i.imgur.com/fUyxd7n.jpg