"We got Acme's new Lead-free plumbing!"
"Lead-free plumbing? As in no lead?"
"Well 8 percent... rather a lot really..."
My layperson expectations:
• "low-X": < 1/3 is X.
• "trace amounts of X": <1% is X.
• "X-free": no reasonably detectable amount is X. Obviously there's some wiggle room for how sensitive the detectors are, but it should be less that "trace amounts," i.e. 0%.
This reminds me of "waterproof" which generally just means it can survive being splashed or rained on for a few minutes, but not submerged.
https://ecology.wa.gov/Spills-Cleanup/Contamination-cleanup/...
https://apps.ecology.wa.gov/dirtalert/?lat=47.349229&lon=-12... (not exactly a circle due to the topography and wind patterns of the area)
The point is, there was a lot of nasty industrial activity in this country pre Clean Air Act. Everyone should be concerned and get their property tested IMO, especially if you have kids. I'm not trying to be alarmist; it doesn't affect my day to day life, it's just something to know. I still grow veggies in my garden, I just use raised beds and dirt from bags from Home Depot.
https://en.wikipedia.org/wiki/Santa_Susana_Field_Laboratory
Among other things (including a nuclear meltdown):
> On 11 December 2002, a Department of Energy (DOE) official, Mike Lopez, described typical clean-up procedures executed by Field Lab employees in the past. Workers would dispose of barrels filled with highly toxic waste by shooting the barrels with rifles so that they would explode and release their contents into the air. It is unclear when this process ended, but for certain did end prior to the 1990s.[29]
Trying to get it cleaned up has been a shitshow.
And I totally wonder whether people are growing food there, soaking all of that up.
I just found that the University of New Hampshire offers a similar test with an additional heavy metals package available which covers cadmium, chromium, copper, lead, nickel & zinc: https://extension.unh.edu/resource/soil-testing-forms
(EDTA is also used medically for heavy metal poisoning).
Anecdotally, we had a major city water line project in our neighborhood that _raised_ our lead levels because it disturbed that sediment protection.
The only real solution is testing and filtering at point of use. But even filtering is hard because most water filters sold are for flavor not for lead.
To be clear: I'm not saying the burden of cost should be solely put on renters/homeowners.
I did work in a lab back in the day where one of the students was filling his water bottle from the DI tap, because he preferred the taste. He didn't drop dead or anything.
I clearly have just enough of the details to not understand.
https://scotchaddict.com/are-leaded-crystal-decanters-danger...
https://www.homedepot.com/p/3M-LeadCheck-Instant-Lead-Test-S... (this actually seems expensive, I'm used to closer to $2-3 per stick)
We have an early 20th century house and run them over anything we're about to demo. So far we've been lucky, so likely a later renovation removed most of the lead that would have been there.
https://www.mayoclinic.org/diseases-conditions/lead-poisonin...
I found out my drinking water had low levels of lead, for about ten years.
The answer to your second question is yes, handling cords with heavily leaded insulation can cause significant amounts of lead to rub off on your hands. This is easily seen with a Lead-Check swab, which will turn red when wiped either on the cord, or even on your fingers after you've spent some time handling the cord.
Just an aside, this is a personal gripe. I grew up on lead solder, making Heathkit projects with my dad.
I tried re-engaging with the electronics hobby as an adult, decades later, in a world filled with ROHS solder, and I have to say it is a huge pain in the ass to work with. Adhesion, balling issues, etc, regardless of core type, flux, etc, even on nice controlled-temp Hakko stations, versus the Weller crap irons of my youth.
Maybe I'm just a grumpy old man, or maybe my memories are covered with rose glasses. But electronics seemed be more enjoyable in the lead era. And to my knowledge, my IQ did not suffer.
I suspect the opposite. I grew up eating off of lead-contaminated Lenox dishes, playing with fishing weights and mercury from broken thermostats, and other stimulating but toxic activities. I strongly suspect these things account for at least some of the attention deficit and impulse control issues I now struggle with as an adult.
I'm sure your IQ is more than adequate, but you have no way of knowing what it would be if your brain was kept cleaner in your youth. For my part, I'd love to be smarter.
https://www.digikey.com/en/products/detail/kester-solder/24-...
Here's half a kilo of lead in a solid metal bar, if you want to just poison a whole city or small country:
https://www.digikey.com/en/products/detail/kester-solder/44-...
Still I agree, the risk is acceptable for the small amount of solder work I do.
Which essentially means its normal for everyone except some people born in the last 20-30 years.
In the atmosphere, sure (as it is not naturally occurring in the air). But how large is this source? And what harm does it actually cause?
There are indications that the levels of lead around airports are very low - even the article linked said that ~2.5% of children around the airport had "detectable" levels of lead. But it doesn't provide enough data to tell if the contamination came from the air. If this was significant, wouldn't many more children around the airport have high (not only detectable) levels of lead? Everyone has to breathe, but not everyone has the same contamination sources.
From Wikipedia:
> Final results from EPA's lead modeling study at the Santa Monica Airport shows off-airport levels below current 150 ng/m3 and possible future 20 ng/m3 levels.[108] Fifteen of 17 airports monitored during a year-long study in the US by the EPA have lead emissions well below the current National Ambient Air Quality Standard (NAAQS) for lead.[109]
To be safe, obviously we want to reduce all exposure to zero.
Avgas was changed in formulation to reduce lead.
There are alternatives to avgas - in Europe, avgas is already hard to find. Automotive gasoline conversions are available for some widely used engines. The problem is that you can't just take it to a shop and covert it - the airplane was originally certified with one engine type. If it is changed, it is no longer certified. No company is willing to eat the costs to re-certify - for the planes that are still in production. Let alone planes made by companies that no longer exist.
In the 'experimental' category, there are many types of engines that can directly burn either avgas or "mogas".
Some manufacturers, like Diamond, can use "jet fuel" (essentially, diesel) in their piston engines (as they have their own engines, based on diesel car engines). But even they will have avgas-burning versions (with Lycoming engines) for the US market.
Then you have competing agencies dragging their feet. There's the EPA, which should be issuing regulations. Then there's the FAA that needs to come up with a solution with the certification issue - they are pretty underfunded so it's unlikely they will. One agency points the finger to the other, none take action. I'm probably missing other agencies. There are alternatives in development - without a full government push, progress is slow.
Meanwhile, planes (and many helicopters) in the US keep spewing lead. Many of which provide important services.
IQ damage of any amount is extremely significant and has subtle effects on society which are difficult to economically quantify, and given that many avgas burners basically do it for fun, seems mostly unjustifiable.
- Paint: lead was banned in paint in 1979, but lead was used less and less even before the cutoff date. Paint is especially a problem when it is chipping or wearing off, like on windows or doors.
- Plumbing. Very old homes may have lead pipes which should be removed. Lead solder was used with copper pipes until ~1984, but this is somewhat less of a concern, depending on your water source (cities can change the water to leach less lead from pipes).
- Plumbing fixtures: this is actually a pretty major source of lead in water, and luckily it is easy to change old faucets. You can run water for a minute to mitigate risk with old faucets.
- Flooring: Lead can be in any ceramic tiles, but generally not too much. It is only a problem if you are removing tiles and are creating lots of dust.
https://www.epa.gov/lead